KaydedilenlerDerginizi ekleyin

Dergiler / Turkish Journal of Agriculture and Forestry / 2010 / Cilt: 34 - Sayı: 3

Certain physical and mechanical properties of medium density fiberboards manufactured from blends of corn (Zea mays indurata Sturt.) stalks and pine (Pinus nigra) wood

Mehmet AKGÜL
Cengiz GÜLER
Yalçın ÇÖPÜR
Sayfa
197–206
Yayın Tarihi
2010-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Increasing the pine fiber ratio in the panel mixture improved panel properties.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Corn stalk is a renewable natural resource that currently has limited industrial utilization.
📊
Temel Bulgular & Veri:The objective of this study was to examine some chemical properties of corn stalk (holocellulose, a-cellulose, lignin and ash content, alcohol-benzene, hot and cold water solubility, and solubility in dilute alkali [1% NaOH]) and to evaluate its suitability for medium-density fiberboard (MDF) production.
💡
Sonuç & Katkı:Increasing the pine fiber ratio in the panel mixture improved panel properties.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Key words: Corn stalk · Turkish black pine · medium density fiberboard

Özet

Corn stalk is a renewable natural resource that currently has limited industrial utilization. The objective of this study was to examine some chemical properties of corn stalk (holocellulose, a-cellulose, lignin and ash content, alcohol-benzene, hot and cold water solubility, and solubility in dilute alkali [1% NaOH]) and to evaluate its suitability for medium-density fiberboard (MDF) production. Panels were produced using mixtures of corn stalk (Zea mays indurata Sturt.) and pine (Turkish Pinus nigra) fibers in various proportions (from 0% to 100%). The panels produced had density levels of 0.6, 0.7, and 0.8 g cm-3. The physical and mechanical properties of the manufactured panels were tested. Chemical analysis shows that the holocellulose, a-cellulose, and lignin content of corn stalk was similar to that of wood and some other crop residues. The ash content of corn stalk was higher than that of soft- and hardwoods. Mechanical test results indicate that the panels produced utilizing solely corn stalk met the required standards, except the panels with a density of 0.6 g cm-3. Increasing the pine fiber ratio in the panel mixture improved panel properties.

Abstract

Corn stalk is a renewable natural resource that currently has limited industrial utilization. The objective of this study was to examine some chemical properties of corn stalk (holocellulose, a-cellulose, lignin and ash content, alcohol-benzene, hot and cold water solubility, and solubility in dilute alkali [1% NaOH]) and to evaluate its suitability for medium-density fiberboard (MDF) production. Panels were produced using mixtures of corn stalk (Zea mays indurata Sturt.) and pine (Turkish Pinus nigra) fibers in various proportions (from 0% to 100%). The panels produced had density levels of 0.6, 0.7, and 0.8 g cm-3. The physical and mechanical properties of the manufactured panels were tested. Chemical analysis shows that the holocellulose, a-cellulose, and lignin content of corn stalk was similar to that of wood and some other crop residues. The ash content of corn stalk was higher than that of soft- and hardwoods. Mechanical test results indicate that the panels produced utilizing solely corn stalk met the required standards, except the panels with a density of 0.6 g cm-3. Increasing the pine fiber ratio in the panel mixture improved panel properties.

🔖

Bu Makaleye Atıf Yap

AKGÜL, M., GÜLER, C., ÇÖPÜR, Y. (2010). Certain physical and mechanical properties of medium density fiberboards manufactured from blends of corn (Zea mays indurata Sturt.) stalks and pine (Pinus nigra) wood. Turkish Journal of Agriculture and Forestry, Cilt: 34 - Sayı: 3, 197–206. https://ajindex.com/articles/180265

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (8)

  1. Akgül M, Şen S, Güler C (2005) Utilization of biomass as en energy source in Turkey. 14th European Biomass Conference and Exhibition Biomass for Energy, Industry and Climate Protection, 17-21
  2. October, Palais des Congrès, Paris, France, pp. 345-348.
  3. Akgül M, Tozluoğlu A (2009) Some chemical and morphological properties of juvenille woods from beech (Fagus orientalis L.) and pine (Pinus nigra A.) plantations. Trends in Applied Sciences Research 4: 116-125.
  4. Alma M H, Kalaycıoğlu H, Bektaş İ, Tutuş A (2005) Properties of cotton carpel-based particleboards. Industrial Crops and Products 22: 141-149. ANSI A208.2 (1994) Medium Density Fiberboard (MDF). National Particleboard Association, Gaithersburg, MD. ASTM D-1037-78 (1994) Standard Methods of Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials, The American Society for Testing and Materials, USA. Bektaş İ, Güler C, Kalaycıoğlu H (2005) The manufacture of particleboards using sunflower stalks (Helianhus annuus I.) and poplar wood (Populus alba L.). J of Composite Materials 39: 467-473.
  5. Chow P (1974) Dry formed composite board from selected agricultural residues world consultation on wood based panels. Food and Agriculture Organization of the United Nations. New Delhi, India. Copur Y, Güler C, Taşçıoğlu C, Tozluoğlu A (2008) Incorporation of hazelnut shell and husk in MDF production, Bioresource Technology 99: 7402-7406.
  6. Copur Y, Guler C, Akgul M, Tascioglu C (2007) Some chemical properties of hazelnut husk and its suitability for particleboard production, Building and Environment 42: 2568-2572. EN 310 (1999) Wood based panels, determination of modulus of elasticity in bending and bending strength. European Standardization Committee, Brussels. EN 317 (1999) Particleboards and fiberboards, determination of swelling in thickness after immersion. European Standardization Committee, Brussels. EN 319 (1999) Particleboards and fiberboards, determination of tensile strength perpendicular to plane of the board. European Standardization Committee, Brussels. Eroglu H (1988) Lif Levha Endüstrisi Ders Notları. Karadeniz Teknik Üniversitesi Yayın No: 304, Trabzon. Eroğlu H, İstek A (2000) Medium density fiberboard (MDF) manufacturing from wheat straw (Triticum aestivum L.). Inpaper International 4: 11-14.
  7. Fengel D, Wegener G (1989)
  8. Ultrastructure, Reactions. In: Wood Chemistry, Walter de Gruyter & Co., Berlin. Fidan, MS, Bozali N, Ertaş M, Alma MH, Bölek Y (2008) Alternatif enerji kaynakları: katı atık