Dergiler / Atmospheric Pollution Research / 2019 / Cilt: 10 - Sayı: 6

Preparation and properties of a rock dust suppressant for a copper mine

Sayfa
2010–2017
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The experimental results show that the dust suppression agent has a high dust removal efficiency and good dust suppression effect.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Dust lifting on copper mine transportation roads likely causes mechanical damage, environmental pollution, and human health hazards.
📊
Temel Bulgular & Veri:The results show that the optimum composition of the dust suppressant is 0.55% carboxymethyl cellulose sodium-grafted acrylamide, 10% sodium silicate concentration, and 0.2% fatty alcohol polyoxyethylene ether.
💡
Sonuç & Katkı:The experimental results show that the dust suppression agent has a high dust removal efficiency and good dust suppression effect.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Dust lifting on copper mine transportation roads likely causes mechanical damage, environmental pollution, and human health hazards. Existing dust suppressants have the disadvantages of low dust suppression efficiencies, environmental pollution, and low pertinence. Therefore, an environmentally friendly and high-efficiency composite rock dust-moisturizing dust suppressant was developed in this study to suppress the dust on copper mine transportation pavements. We used sodium carboxymethyl cellulose, acrylamide, sodium silicate, and fatty alcohol polyoxyethylene ether as raw materials and determined the best ratio of the dust sample using evaporation resistance, hygroscopicity, permeability, pH, and solution viscosity analyses. The results show that the optimum composition of the dust suppressant is 0.55% carboxymethyl cellulose sodium-grafted acrylamide, 10% sodium silicate concentration, and 0.2% fatty alcohol polyoxyethylene ether. A simulated dust removal and reduction experiment was carried out using this composition. The experimental results show that the dust suppression agent has a high dust removal efficiency and good dust suppression effect.

🔖

Bu Makaleye Atıf Yap

HUANG, Z., ZHANG, L., YANG, Z., ZHANG, J., GAO, Y., ZHANG, Y. (2019). Preparation and properties of a rock dust suppressant for a copper mine. Atmospheric Pollution Research, Cilt: 10 - Sayı: 6, 2010–2017. https://ajindex.com/articles/165083

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (8)

  1. Amato, F., Escrig, A., Sanfelix, V., Celades, I., Reche, C., Monfort, E., Querol, X., 2016. Effects of water and CMA in mitigating industrial road dust resuspension. Atmos. Environ. 131, 334–340. https://doi.org/10.1016/j.atmosenv.2016.02.018.
  2. Baker, C.J., 2001. Flow and dispersion in ground vehicle wakes. J. Fluids Struct. 15, 1031–1060. https://doi.org/10.1006/jfls.2001.0385.
  3. Chen, R.H., Wang, B.Q., Wang, Z.B., Yao, S., 2015. The pollution character analysis and risk assessment for metals in dust and PM10 around road from China. Biomed. Environ. Sci. 28, 44–56. https://doi.org/10.3967/bes2015.005.
  4. Cook, A.G., Weinstein, P., Centeno, J.A., 2005. Health effects of natural dust: role of trace elements and compounds. Biol. Trace Elem. Res. 103, 1–16. https://doi.org/10.1385/ bter:103:1:001. Cui, D., Nie, B.S., Yang, H., Dai, L.C., Zhao, C.H., Zhao, F., Li, H.L., 2011. Experimental research on optimization and coal dust suppression performance of magnetized surfactant solution. Procedia Engineering 26, 1314–1321. https://doi.org/10.1016/j. proeng.2011.11.2306. Dong, Q., Gao, G.J., 2014. Experimental study on wetting agents of improving coal mine de-dusting efficiency. Coal Technol. 35, 204–206. https://doi.org/10.13301/j.cnki. ct.2016.01.079. Drehmel, D.C., Daniel, B.E., Carnes, D., 2010. Relative effectiveness of chemical additives and wind screens for fugitive dust control. Actual tests show that chemical additives and wind screens can drastically raise the efficiency of fugitive-dust control. Environ. Prog. Sustain. Energy 1, 16–20. https://doi.org/10.1002/ep.670010106.
  5. Fan, J.G., Zheng, L.Z., Liu, B.L., Qi, F., Chen, S., Liu, T.M., 2000. Hygienic Evaluation of a Copper Mine Dust Hazard, vol. 01. Science and Technology of Labor Protection, pp. 47–48.
  6. Ge, H.C., Pang, W., Luo, D.K., 2006. Graft copolymerization of chitosan with acrylic acid under microwave irradiation and its water absorbency. Carbohydr. Polym. 66, 372–378. https://doi.org/10.1016/j.carbpol.2006.03.017.
  7. Georgees, R.N., Hassan, R.A., Evans, R.P., Jegatheesan, P., 2016. An evaluation of performance- related properties for granular pavement materials using a polyacrylamide additive. Int. J. Pavement Eng. 19, 153–163. https://doi.org/10.1080/10298436. 2016.1172710. Gillies, J.A., Etyemezian, V., Kuhns, H., Nikolic, D., Gillette, D.A., 2005. Effect of vehicle characteristics on unpaved road dust emissions. Atmos. Environ. 39, 2341–2347. https://doi.org/10.1016/j.atmosenv.2004.05.064.
  8. Gulia, S., G