Dergiler / Textile and Apparel / 2026 / Volume: 29 Issue: 1

DIFFERENT METHODS OF FABRICATING CONDUCTIVE NANOFIBERS

Sayfa
—
Yayın Tarihi
2019-03-26
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The results showed that conductive nanofibers can be successfully produced with different electrical conductivities depending on the method and the material . 

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Conductive nanofibers can be produced by different methods.
📊
Temel Bulgular & Veri:In this study, four different methods to fabricate conductive nanofibers were explained and supported with experimental results.
💡
Sonuç & Katkı:The results showed that conductive nanofibers can be successfully produced with different electrical conductivities depending on the method and the material . 
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:conductive nanofibers · electrospinning · electrically assisted solution blowing

Abstract

Conductive nanofibers can be produced by different methods. In this study, four different methods to fabricate conductive nanofibers were explained and supported with experimental results. Nanofibers were made conductive by fabricating nanofibers from intrinsically conductive polymers (polyaniline/polyethylene oxide nanofiber production), coating the non-conductive nanofiber mat with a conductive material (copper electroplating of polyacrylonitrile nanofibers), adding a conducting material (carbon black nanoparticles, silver nanoparticles, ionic liquid) into the spinning solution, and heat treatment of the nanofiber mat (carbon and ITO nanofiber production). The surface and the electrical properties of the nanofibers were investigated. The advantages and disadvantages of the methods were discussed in detail. The results showed that conductive nanofibers can be successfully produced with different electrical conductivities depending on the method and the material . 

🔖

Bu Makaleye Atıf Yap

Düzyer, Ş. (2019). DIFFERENT METHODS OF FABRICATING CONDUCTIVE NANOFIBERS. Textile and Apparel, Volume: 29 Issue: 1. https://doi.org/10.32710/tekstilvekonfeksiyon.536834

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (26)

  1. Ko, F, Aufy,A,Macdiarmid A, (Edited X.T. Ko, F.K., Aufy, A.Lam, H., “Electrostatistically generated nanofibers for wearable electronics” in “Wearable electronics and photonics.” CRC Press, 2005.
  2. Aussawasathien,L.,D., Dong, J-H., Dai, “Electrospun polymer nanofiber sensors” Synth. Met., 154:37-40, 2005.
  3. MacDiarmid, A.G.,‘Synthetic Metals’: A Novel Role for Organic Polymers (Nobel Lecture)” Angew. Chemie Int. Ed., 40 (14):2581–2590, 2001.
  4. Thavasi, V.,G. Singh, S. Ramakrishna, “Electrospun nanofibers in energy and environmental applications” Energy Environ. Sci., vol. 1, no. 2, p. 205, 2008.
  5. Duzyer, S., A. Hockenberger, and E. Zussman, “Characterization of solvent-spun polyester nanofibers” J. Appl. Polym. Sci., 120 (2): 759-769, 2011.
  6. Sinha-Ray, S., M. W. Lee, S. Sinha-Ray, S. An, B. Pourdeyhimi, S. S. Yoon, A. L. Yarin, “Supersonic nanoblowing: a new ultra-stiff phase of nylon 6 in 20–50 nm confinement” J. Mater. Chem. C, 1 (21): 3491, 2013.
  7. Lee, B.,M.W., Yoon, S.G., Yarin, A.L., Sinha-Ray, S., Pourdeyhimi, “US20140234457 A1,” 2014.
  8. Zhang, Y.,G. C. Rutledge, “Electrical conductivity of electrospun polyaniline and polyaniline-blend fibers and mats” Macromolecules, 45(10): 4238–4246, 2012
  9. Wei, M., J. Lee, B. Kang, J. Mead, “Preparation of Core-Sheath Nanofibers from Conducting Polymer Blends” Macromol. Rapid Commun., 26(14): 1127–1132, 2005.
  10. Yu, QZ.,M.M. Shi, M. Deng, M. Wang, H.Z. Chen, “Morphology and conductivity of polyaniline sub-micron fibers prepared by electrospinning” Mater. Sci. Eng. B Solid-State Mater. Adv. Technol., 150(1):70–76, 2008.
  11. Baik, W., W. Luan, R. H. Zhao, S. Koo, K. S. Kim, “Synthesis of highly conductive poly(3,4-ethylenedioxythiophene) fiber by simple chemical polymerization” Synth. Met.,159(13):1244-1246, 2009.
  12. Latessa, G., F. Brunetti, A. Reale, G. Saggio, A. Di Carlo, “Piezoresistive behaviour of flexible PEDOT:PSS based sensors” Sensors Actuators, B Chem., 139 (2): 304–309, 2009.
  13. Zhao, W., B. Yalcin, M. Cakmak, “Dynamic assembly of electrically conductive PEDOT:PSS nanofibers in electrospinning process studied by high speed video” Synth. Met., 203:107–116, 2015.
  14. Liu, N.,G.Fang, J.Wan, H.Zhou,H. Long, X. Zhao, “Electrospun PEDOT:PSS–PVA nanofiber based ultrahigh-strain sensors with controllable electrical conductivity” J. Mater. Chem.,21(47). 18962, 2011.
  15. Tiwari, M.K., A. L. Yarin, C. M. Megaridis, “Electrospun fibrous nanocomposites as permeable, flexible strain sensors” J. Appl. Phys., 103 (4): 044305, 2008.
  16. Lu, X., J. Zhou, Y. Zhao, Y. Qiu, J. Li, “Room Temperature Ionic Liquid Based Polystyrene Nanofibers with Superhydrophobicity and Conductivity Produced by Electrospinning” Chem. Mater., 20(10): 3420-3424, 2008.
  17. Sinha-Ray, S., Y. Zhang, A. L. Yarin, “Thorny devil nanotextured fibers: the way to cooling rates on the order of 1 kW/cm2” Langmuir, 27(1): 215–226, 2011.
  18. Wang, Y., S. Serrano, J.J. Santiago-Aviles, "Conductivity measurement of electrospun PAN-nased carbon nanofibers" Journal of Material Science Letters, 21:1055-1057, 2002.
  19. Zhi, M., A. Manivannan, F. Meng, N. Wu, “Highly conductive electrospun carbon nanofiber/MnO2 coaxial nano-cables for high energy and power density supercapacitors, Journal of Power Sources, 208:345-353, 2012
  20. Dalton,S., F.Heatley, P.M. Budd, “Thermal stabilization of polyacrylonitrile fibres” Polymer, 40:553-43, 1999.
  21. Ismar, E., A.S. Sarac, “Oxidation of polyacrylonitrile nanofiber webs as a precursor for carbon nanofiber: aligned and non-aligned nanofibers” Polymer Bulletin, 75: 485-499, 2018.
  22. Rahaman, MSA., A. F. Ismail, A. Mustafa, “A review of heat treatment on polyacrylonitrile fiber” Polymer Degradation and Stability, 92(8):1421–1432, 2007.
  23. Xu, S., Y. Shi, “Low temperature high sensor response nano gas sensor using ITO nanofibers” Sensors Actuators, B Chem., 143(1): 71–75 2009.
  24. Munir, MM., F. Iskandar, K. M. Yun, K. Okuyama, M. Abdullah, “Optical and electrical properties of indium tin oxide nanofibers prepared by electrospinning” Nanotechnology, 19(14):145603, 2008.
  25. http://www.tibtech.com/conductivity.php. [Accessed: 22-Nov-2017].
  26. Gulen, M., G. Yildirim, S. Bal, A. Varilci, I. Belenli, M. Oz, “Role of annealing temperature on microstructural and electro-optical properties of ITO films produced by sputtering” J. Mat. Sci. Mater. Electron., 24:467-74, 2013.