KaydedilenlerDerginizi ekleyin

Dergiler / Textile and Apparel / 2026 / Volume: 36 Issue: 2

Tensile, Impact and Interlaminar Shear Strength Behaviors of Basalt, Carbon and Aramid Fabrics Reinforcement Hybrid Textile Composites

Emel Ceyhun Sabır(CUKUROVA UNIVERSITY)0000-0002-2385-1524
Çiğdem Sarpkaya(KARABÜK ÜNİVERSİTESİ)0000-0001-7710-1035
Sayfa
—
Yayın Tarihi
2026-07-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The best ILSS value was obtained in the Basalt/Carbon hybrid composite structure without aramid fabric.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, selected mechanical properties of carbon, aramid and basalt plain woven fabric reinforced epoxy composite plates were investigated.
📊
Temel Bulgular & Veri:The composites were designed as hybrid form (2 and 3 layered) structures with different orders and a total of 6 composite samples were produced.
💡
Sonuç & Katkı:The best ILSS value was obtained in the Basalt/Carbon hybrid composite structure without aramid fabric.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Tensile strength · Impact strength · Interlaminar shear strength (ILSS)

Abstract

In this study, selected mechanical properties of carbon, aramid and basalt plain woven fabric reinforced epoxy composite plates were investigated. The composites were designed as hybrid form (2 and 3 layered) structures with different orders and a total of 6 composite samples were produced. Selected mechanical properties are impact strength, tensile strength, tensile elongation (%) and interlaminar shear strength (ILSS). The layer order in the composite material affected the impact, tensile and ILSS mechanical strengths were determined. It was observed that the impact strength increased in the arrangement where the carbon fabric was in the upper layer, and the presence of aramid in the upper layer decreased the impact strength. The highest impact strength belongs to the Carbon/Aramid/Basalt composite. Aramid/Basalt composite was found to have the best tensile strength and % tensile elongation values. The best ILSS value was obtained in the Basalt/Carbon hybrid composite structure without aramid fabric.

🔖

Bu Makaleye Atıf Yap

Sabır, E. C., Sarpkaya, Ç. (2026). Tensile, Impact and Interlaminar Shear Strength Behaviors of Basalt, Carbon and Aramid Fabrics Reinforcement Hybrid Textile Composites. Textile and Apparel, Volume: 36 Issue: 2. https://doi.org/10.32710/tekstilvekonfeksiyon.1674216

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (25)

  1. Şahin Y, Patrick B (2018) Development of epoxy composites containing basalt and carbon fabrics and their mechanical behaviours. Int. J of Metallurgy and Metal Phy. 3:025
  2. Sun G, Tong S, Chen D, Gong Z, Li Q (2018) Mechanical properties of hybrid composites reinforced by carbon and basalt fibers. Int. J. Mech. Sci. 148 636–651, https://doi.org/10.1016/j.ijmecsci.2018.08.007
  3. Alshgari RA, Prasad MSC, Srivastava BP, Al Ansari MS, Gupta P, Sivakumar A, Wabaidur SM, Islam MA, Diriba A (2022) Mechanical evaluation on carbon/basalt fiber-reinforced hybrid polymer matrix composite. Adv. Polym. Technol. Vol 2022, Article ID 7742349, 6 pages, https://doi.org/10.1155/2022/7742349
  4. Mousavi-Bafrouyi SSM, Eslami-Farsani R, Geranmayeh A (2022) Effect of stacking sequence on the mechanical properties of pseudo-ductile thin-ply unidirectional carbon-basalt fibers/ epoxy composites. J. Ind. Text. Vol. 51(2S) 2835S–2852S https://doi.org/10.1177/ 1528083720978400
  5. Ruban RB, Asokan R, Senbagan M, Karthika R, Kethavarapu S, Nishtha S (2018) Evaluation on mechanical properties of intra-ply hybrid carbon aramid/epoxy composite laminates. Mater. Today: Proc. 5, 25323–25330
  6. Sarasini F, Tirillo J, Valente M, Ferrante L, Cioffi S, Iannace S, Sorrentino L (2013) Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties. Mater. Des. 49, 290–302 https://doi.org/10.1016/j.matdes.2013.01.010
  7. Çelik O, Yaşar A, Karaçor B (2023) Properties of basalt/aramid fiber reinforced hybrid composites compared to carbon fiber composites. Polym. Compos. 44:3509–3521 https://doi.org/10.1002/pc.27339
  8. Behnia S, Daghigh V, Nikbin K, Fereidoon A, Ghorbani J (2016) Influence of stacking sequence and notch angle on the charpy impact behavior of hybrid composites. Mech. Compos. Mater. Vol. 52, No. 4, September, 489-496. https://doi.org/10.1007/s11029-016-9599-7
  9. Ekşi S, Genel K (2017) Comparison of mechanical properties of unidirectional and woven carbon, glass and aramid fiber reinforced epoxy composites. Acta Phys. Pol. A. 132(3), 879-882
  10. Chafiq J, Oucht I, El Fqih MA (2022) Investigations of tensile behavior of basalt/glass/carbon/hybrid fiber composite. Mater. Today: Proc. 52, 53–59. https://doi.org/10.1016/j.matpr.2021.10.142
  11. Salasinska K, Cabulis P, Kirpluks M, Kovalovs A, Kozikowski P, Barczewski M, Celinski M, Mizera K, Galecka M, Skukis E, Kalnins K, Cabulis U, Boczkowska A (2022) The Effect of manufacture process on mechanical properties and burning behavior of epoxy-based hybrid composites. Materials, 15, 301. https:// doi.org/10.3390/ma15010301
  12. Agarwal P, Bundela AS, Choudhary P, Pai Y, Pai DG (2024) Effect of carbon-Kevlar intraply surface layers on the mechanical and vibrational properties of basalt reinforced polymer composites. Cogent Eng. 11:1, 2403704. https://doi.org/10.1080/23311916.2024.2403704
  13. Karaçor B, Özcanlı M (2022-a) Evaluation of mechanical properties of intraply hybrid carbon/aramid composite materials. Bursa Uludağ Uni. J of The Faculty of Eng.; Vol. 27, No. 2. https://doi.org/10.17482/ uumfd.978721
  14. Gülcan E (2019) Examination of composite properties of carbon fabric reinforced structures, Master thesis, Institute of Natural and Applied Sciences, Department of Textile Engineering, University of Bursa Uludağ, Türkiye.
  15. Karaçor B, Özcanlı M (2022-b) Thermal and mechanical characteristic investigation of the hybridization of basalt fiber with aramid fiber and carbon fiber. Polym. Compos. 43:8529–8544. https://doi.org/10.1002/ pc.27022
  16. Joshi S, Hiremath A, Nayak SY, Jaideep JP, Thipperudrappa S (2022) Hybridization effect on the mechanical properties of basalt fiber reinforced ZnO modified epoxy composites. Polym. Compos. 43(8), 5704-5714. https://doi.org/ 10.1002/pc.26889
  17. Ou Y, González C, Vilatela JJ (2020) Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils. Composites, Part B. 201, 108372. https://doi.org/10.1016/j. compositesb.2020.108372
  18. Acar V, Akbulut H, Sarıkanat M, Seydibeyoğlu MÖ, Seki Y, Erden S (2013) Enhancement of interface mechanics of carbon fiber reinforced prepreg composites with carbon nanostructures. Electronic Journal of Machine Technologies, (10) 43-51
  19. Altay L, Sarıkanat M (2019) Karbon lif yüzey modifikasyonunun karbon lif ve karbon lif takviyeli kompozit malzemelerin özelliklerine etkilerinin incelenmesi. Tekstil ve Mühendis, 26(113), 25-32. https:// doi.org/10.7216/1300759920192611303
  20. Chowdhury IR, Nash NH, Portela A, O'Dowd NP, AJ Comer (2020) Analysis of failure modes for a non-crimp basalt fiber reinforced epoxy composite under flexural and interlaminar shear loading. Compos. Struct., 245, 112317. https://doi.org/10.1016/j.compstruct.2020.112317
  21. Bandaru AK, Pothnis JR, Portela A, Gujjala R, Ma H, O'Higgins RM (2024) Flexural and interlaminar shear response of novel methylmethacrylate composites reinforced with high-performance fibres. Polym. Test. 140, 108578. https://doi.org/10.1016/ j.polymertesting. 2024.108578
  22. Demir A, Bozacı E, Gülümser T, Sarıkanat M. (2016) An ecological approach for the surface modification of aramid fibers. Tekstil ve Konfeksiyon, 26(3), 256-261
  23. Bandaru AK, Khan AN, Durmaz T, Alagirusamy R, O'Higgins RM (2023) Improved mechanical properties of multi-layered PTFE composites through hybridisation. Constr. Build. Mater. 374, 130921. https://doi.org/10.1016/j.conbuildmat.2023.130921
  24. Kaybal HB (2021) An experimental study on interlaminar shear strength and fracture toughness: Carbon fiber reinforced epoxy composites enhanced with the CaCO3 nanoparticles. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 10(2), 777-783. https://doi: 10.28948/ngumuh.838807
  25. Petrucci R, Santulli C, Puglia D, Sarasini F, Torre L, Kenny JM (2013) Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion. Mater. Des., 49, 728-735. https://doi.org/10.1016/j.matdes.2013.02.014