KaydedilenlerDerginizi ekleyin

Dergiler / International Journal of Energy Applications and Technologies / 2025 / Cilt: 11 Sayı: 1

Validation and simulation of furnace exit gas temperature and modelling of furnace slag thickness of oil fired boiler of power generating steam turbine

Muhammad Arshad Khan(HUB Power Company Limited (HUBCO), Karachi, Sindh, Pakistan)0009-0008-9041-1095
Sayfa
1–12
Yayın Tarihi
2025-12-22
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sensitivity analysis of furnace exit gas temperature at boiler rated loading condition was also performed in-order to analyse the impact of boiler crucial parameters on furnace exit gas temperature.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This paper discusses on the study of validation and simulation of the furnace exit gas temperature and modeling of furnace slag thickness of oil fired boiler of power generating steam turbine unit of 323 MWe.
📊
Temel Bulgular & Veri:Furnace exit gas Temperature validation was performed at minimum and rated loading conditions of the boiler.
💡
Sonuç & Katkı:Sensitivity analysis of furnace exit gas temperature at boiler rated loading condition was also performed in-order to analyse the impact of boiler crucial parameters on furnace exit gas temperature.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Furnace exit gas temperature · Furnace heat and mass balance · Furnace fouling and slagging

Özet

This paper discusses on the study of validation and simulation of the furnace exit gas temperature and modeling of furnace slag thickness of oil fired boiler of power generating steam turbine unit of 323 MWe. Furnace exit gas temperature is an important operational boiler parameter. Its continuous monitoring and controlling is crucial to get reduction in fire side corrosion and fouling of furnace. Thermodynamic heat and mass balance model was developed to validate the furnace exit gas temperature measurement of the newly installed Infrared sensors at furnace exit. Furnace exit gas Temperature validation was performed at minimum and rated loading conditions of the boiler. The difference between measured and calculated furnace exit gas temperature was in the range of ± 20°C. Fifteen variables of boiler including steam turbine were selected at different operating conditions of the boiler to perform the simulation study of furnace exit gas temperature by using Excel solver module. The temperature difference of measured and simulated temperature remained within ± 5°C at minimum and rated loading conditions of the boiler due to strong statistical co-relation among the selected variables. Modeling of furnace slag thickness was done in relation to the increase in furnace exit gas temperature. Analysis shows that 15 mm thick layer of ash deposit on furnace walls can increase furnace exit gas temperature by 149°C. Sensitivity analysis of furnace exit gas temperature at boiler rated loading condition was also performed in-order to analyse the impact of boiler crucial parameters on furnace exit gas temperature.

Abstract

This paper discusses on the study of validation and simulation of the furnace exit gas temperature and modeling of furnace slag thickness of oil fired boiler of power generating steam turbine unit of 323 MWe. Furnace exit gas temperature is an important operational boiler parameter. Its continuous monitoring and controlling is crucial to get reduction in fire side corrosion and fouling of furnace. Thermodynamic heat and mass balance model was developed to validate the furnace exit gas temperature measurement of the newly installed Infrared sensors at furnace exit. Furnace exit gas Temperature validation was performed at minimum and rated loading conditions of the boiler. The difference between measured and calculated furnace exit gas temperature was in the range of ± 20°C. Fifteen variables of boiler including steam turbine were selected at different operating conditions of the boiler to perform the simulation study of furnace exit gas temperature by using Excel solver module. The temperature difference of measured and simulated temperature remained within ± 5°C at minimum and rated loading conditions of the boiler due to strong statistical co-relation among the selected variables. Modeling of furnace slag thickness was done in relation to the increase in furnace exit gas temperature. Analysis shows that 15 mm thick layer of ash deposit on furnace walls can increase furnace exit gas temperature by 149°C. Sensitivity analysis of furnace exit gas temperature at boiler rated loading condition was also performed in-order to analyse the impact of boiler crucial parameters on furnace exit gas temperature.

🔖

Bu Makaleye Atıf Yap

Khan, M. A. (2025). Validation and simulation of furnace exit gas temperature and modelling of furnace slag thickness of oil fired boiler of power generating steam turbine. International Journal of Energy Applications and Technologies, Cilt: 11 Sayı: 1, 1–12. https://doi.org/10.31593/ijeat.1302754

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (23)

  1. Basu, Prabir. and Kefa, Cen. and Jestin, Louis. Boiler and Burners design and Theory, First edition, Springer- Verlag, Inc., New York, USA, December 1999.
  2. Xie, Yan. Liu, Xin. Zhang, Chaoqum, Zhang. Zhao,Jun and Wang, Heyang, 2021, Coupled heat transfer model for the combustion and steam characteristics of coal fired boilers, Engineering application of computation fluid mechanics, 15, 490-502.
  3. Kakac, Sadik. Boilers, Evaporators and Condensers, First edition, John Wiley & Sons, Inc. USA, 1991.
  4. Annaratone, Donatello. Steam Generators, Description and Design, First edition, Springer - Verlag Berlin Heidelberg, Germany, 2008.
  5. Wang, Heyang, Zhang, Chaoqum and Liu, Xin, 2020, Heat transfer calculation methods in three dimensional CFD model, Applied Thermal Engineering,166, 114633.
  6. Madejski, Pawel and Zymelka, Piotr. 2020, Calculation methods of steam boiler operation factors under varying operating conditions with the use of computational thermodynamic modeling. Energy, 197, 117221.
  7. Cortes, Cristobal and Diez, Luis I. 2001, Modeling large Size boiler as a set of heat exchangers - Tips and Tricks, ASME International Mechanical Engineering Congress and Exposition, 41-48.
  8. Rayaprolu, Kumar. Boilers for Power and Process, First edition, Taylor and Francis group, New York, USA, 2009.
  9. Gill, A.B. Power Plant Performance, First edition, Butterworth and Co (Publishers) Ltd., 1984.
  10. Gay, Rodney R. and Palmer, Carl. and A, Erbes. and Michael R. Power Plant Performance Monitoring, Second edition R-Squared Publishing, Woodland, CA., USA, 2004.
  11. ASME PTC 4.4 Gas Turbine Steam Generators 1981.
  12. P.Chattopadhyay. Engineering Thermodynamics, Second edition, Oxford University press, New Delhi, India, 2010.
  13. Levin, Richard I. and Rubin, David S. Statistics for Management, Seventh Edition, Person Education, Inc, New Jersey, USA and Dorling Kindersley, India. 2008.
  14. Charles P. Bonini. and Warren H. Hausman and Harold Bierman Jr. Quantitative Analysis For Management, ninth edition, The McGraw-Hill Companies, Inc, 1997.
  15. Wall, T. F. Bhattacharya, S. P. Zhang, D. K. Gupta and R.P. HE, X. 1993, The properties and Thermal effects of Ash deposits in Coal fired furnaces, Prog. Energy Combust. Sci., Elsevier Inc. 1993, 19, 487-504.
  16. Ots, A., Thermo physical properties of ash deposits on boiler heat exchanger surfaces, 2011, https://heatexchanger-fouling.com/wp-content/uploads/2021/09/22_Ots_F.pdf. (June 05-10, 2011).
  17. Yanguo, Zhang. Li, Qinghai and Zhou, Hui. Theory and Calculation of Heat Transfer in Furnaces, First edition, Elsevier Inc. 2016.
  18. Kang, Youngio. Lee, Joonho and Morita, Kazuki. 2014, Thermal Conductivity of Molten Slag: A Review of Measurement Techniques and Discussion Based on Micro-structural Analysis, J-STAGE, (54) 9, 2008-2016.
  19. Li, Qiang. Wang,Qian. Zhang, Jiansheng. Wang, Weiliang and Liu, Jizhen. 2021, Transition temperature and thermal conduction behavior of slag in gasification process, Energy, Elsevier, 222(C), 119940.
  20. Ganapathy,V. Industrial Boilers and Heat Recovery Steam Generators, First edition, Marcel Dekker, Inc. Madison Avenue, New York, NY, 2002.
  21. Babcock, George H. and Wilcox, Stephen. Steam Its Generation and Use, Thirty eighth edition, The Babcock and Wilcox Company, New York, USA, 1975.
  22. A. Bhuiyan, Arafat and Naser, Jamal. 2015, Modeling of slagging in industrial furnace- a comprehensive review, Procedia Engineering, Elsevier,105, 512-519.
  23. Wang, Yibin. Wang, Xiaoxiao. Wang, Meng and Tan, Houzhang, 2020, Formation of sulfide deposit and high temperature corrosion behavior at fireside in a coal fired boiler, Energy and Fuels, 34(11), 13849-13861.