Dergiler / Atmospheric Pollution Research / 2020 / Cilt: 11 - Sayı: 1

Study of diesel-biodiesel blends combustion and emission characteristics in a CI engine by adding nanoparticles of Mn (II) supramolecular complex

Sayfa
117–128
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is observed that the NOx emissions for all SC1 nanofluids combustion increase by 30.41–67.62% and the smoke emissions reduce by 32–44.27% as has been compared with pure Diesel.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The supramolecular complex (SC1) [Mn(EIN)4(NCS)2] was synthesized and characterized as a new nanosized emulsion additive to improve the fuel incineration and emission formation behavior of a diesel-biodiesel blendsfueled CI engine.
📊
Temel Bulgular & Veri:X-ray diffraction of one crystal, a spectroscopy technique and transmission electron microscopy (TEM) have been entirely examined for the structure formation of SC1.
💡
Sonuç & Katkı:It is observed that the NOx emissions for all SC1 nanofluids combustion increase by 30.41–67.62% and the smoke emissions reduce by 32–44.27% as has been compared with pure Diesel.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

The supramolecular complex (SC1) [Mn(EIN)4(NCS)2] was synthesized and characterized as a new nanosized emulsion additive to improve the fuel incineration and emission formation behavior of a diesel-biodiesel blendsfueled CI engine. X-ray diffraction of one crystal, a spectroscopy technique and transmission electron microscopy (TEM) have been entirely examined for the structure formation of SC1. Adding 50, 100, and 150 ppm of SC1 with hydrogen peroxide (H2O2) is used to prepare the nanofluids emulsions. Nanosized SC1 with an average particle size of 15.25 nm is used as the heterogeneous medium for generating •OH radicals and O2 which are essential for the improvement of diesel-biodiesel blends fuel reactivity in a CI engine cylinder. Three Diesel-Biodiesel Blends with SC1 nanofluid emulsions have been prepared by blending 49% of diesel #1 fuel, 49% waste cooking oil biodiesel, 2% of SC1 nanofluid emulsion with hydrogen peroxide (H2O2) by the motorized agitator. The CI engine features are examined with all three SC1 nanofluid emulsions and the findings are discussed under separate conditions with conventional diesel and diesel-biodiesel blends. The operations of the diesel engine in the presence of SC1 nanofluid emulsions improve the thermal brake efficiency by 14.8–20.52% for diesel fuel. Furthermore, for SC1 nanofluid emulsions, CO and HC emissions are drastically decreased by 48.19–62.05% and 15.34–60.94% compared to pure diesel fuel, respectively. It is observed that the NOx emissions for all SC1 nanofluids combustion increase by 30.41–67.62% and the smoke emissions reduce by 32–44.27% as has been compared with pure Diesel.

🔖

Bu Makaleye Atıf Yap

ELKELAWY, M., ETAİW, S. E. H., BASTAWİSSİ, H. A., MARİE, H., ELBANNA, A., PANCHAL, H., SADASİVUNİ, K., BHARGAV, H. (2020). Study of diesel-biodiesel blends combustion and emission characteristics in a CI engine by adding nanoparticles of Mn (II) supramolecular complex. Atmospheric Pollution Research, Cilt: 11 - Sayı: 1, 117–128. https://ajindex.com/articles/157242

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Abdel-Latif, S.A., Mohamed, A.A., 2018. Synthesis, spectroscopic characterization, first order nonlinear optical properties and DFT calculations of novel Mn (II), Co (II), Ni (II), Cu (II) and Zn (II) complexes with 1, 3-diphenyl-4-phenylazo-5-pyrazolone ligand. J. Mol. Struct. 1153, 248–261.
  2. Aghbashlo, M., Tabatabaei, M., Khalife, E., Shojaei, T.R., Dadak, A., 2018. Exergoeconomic analysis of a DI diesel engine fueled with diesel/biodiesel (B5) emulsions containing aqueous nano cerium oxide. Energy. Bastawissi, H.A.E., Elkelawy, M., Panchal, H., Kumar Sadasivuni, K., 2019. Optimization of the multi-carburant dose as an energy source for the application of the HCCI engine. Fuel 253, 15–24.
  3. Calder, J., Roy, M.M., Wang, W., 2018. Performance and emissions of a diesel engine fueled by biodiesel-diesel blends with recycled expanded polystyrene and fuel stabilizing additive. Energy 149, 204–212.
  4. Chandra Sekhar, S., Karuppasamy, K., Vedaraman, N., Kabeel, A.E., Sathyamurthy, R., Elkelawy, M., Alm ElDin Bastawissi, H., 2018. Biodiesel production process optimization from Pithecellobium dulce seed oil: performance, combustion, and emission analysis on compression ignition engine fuelled with diesel/biodiesel blends. Energy Convers. Manag. 161, 141–154.
  5. Chang, H.N., Hou, S.X., Hao, Z.C., Cui, G.H., 2018. Ultrasound irradiation effect on morphological properties of a 3D nano zinc (II) supramolecular coordination polymer. Ultrason. Sonochem. 41, 67–74.
  6. Duda, K., Wierzbicki, S., Śmieja, M., Mikulski, M., 2018. Comparison of performance and emissions of a CRDI diesel engine fuelled with biodiesel of different origin. Fuel 212, 202–222.
  7. Efe, S., Ceviz, M.A., Temur, H., 2018. Comparative engine characteristics of biodiesels from hazelnut, corn, soybean, canola and sunflower oils on DI diesel engine. Renew. Energy 119, 142–151.
  8. El Shenawy, E.A., Elkelawy, M., Bastawissi, H.A.-E., Panchal, H., Shams, M.M., 2019. Comparative study of the combustion, performance, and emission characteristics of a direct injection diesel engine with a partially premixed lean charge compression ignition diesel engines. Fuel 249, 277–285.
  9. Elkelawy, M., Alm-Eldin Bastawissi, H., Esmaeil, K.K., Radwan, A.M., Panchal, H., Sadasivuni, K.K., Ponnamma, D., Walvekar, R., 2019. Experimental studies on the biodiesel production parameters optimization of sunflower and soybean oil mixture and DI engine combustion, performance, and emission analysis fueled with diesel/ biodiesel blends. Fuel 255, 115791. E