KaydedilenlerDerginizi ekleyin

Dergiler / International Journal of Engineering Technologies / 2026 / Cilt: 10 Sayı: 2

A Systematic Review of Laser Surfacing, Resurfacing, and Cutting

Akpaduado John(Lehigh University)0000-0002-8220-7093
Nick Caiazzo(Lehigh University)0009-0004-7794-5405
Tom Griese(Lehigh University)0009-0009-7135-5638
Sayfa
57–70
Yayın Tarihi
2025-09-08
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

They also advocated further research to optimize parameter selection in laser machining processes.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Laser surfacing, resurfacing, and cutting are leading-edge laser machining processes that bring benefits not previously known to the machining industry through state-of-the-art techniques.
📊
Temel Bulgular & Veri:Laser machining is growing rapidly as the industry adopts additive manufacturing, creating a need for a process review.
💡
Sonuç & Katkı:They also advocated further research to optimize parameter selection in laser machining processes.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Laser surface finishing · laser cutting · laser rust removal

Abstract

Laser surfacing, resurfacing, and cutting are leading-edge laser machining processes that bring benefits not previously known to the machining industry through state-of-the-art techniques. Laser machining is growing rapidly as the industry adopts additive manufacturing, creating a need for a process review. This study aims to critique the viability of laser surfacing, rust removal, and cutting machine processes in industry. A comprehensive literature review approach was adopted on previous studies on laser machining processes. The study also mirrored the effects of laser machining operations parameters by determining how changing them affects the final product. The results confirmed that laser surfacing can enhance surface finish on both simple and complex geometries for various materials. It was also discovered that thermal expansion and pressure waves can remove unwanted particles such as rust and dirt in the case of laser cleaning. Laser cutting provides a thorough and precise cut with no tool wear. These methods can efficiently and precisely perform across various complex geometries with little waste and no tool wear. Additionally, results show that laser power and scanning speed parameters are the most important laser parameters used in determining the success of a laser machining operation. Hence, the authors emphasized the importance of carefully selecting laser parameters, ensuring they are specifically tailored to the material and condition of the workpiece. They also advocated further research to optimize parameter selection in laser machining processes.

🔖

Bu Makaleye Atıf Yap

John, A., Caiazzo, N., Griese, T. (2025). A Systematic Review of Laser Surfacing, Resurfacing, and Cutting. International Journal of Engineering Technologies, Cilt: 10 Sayı: 2, 57–70. https://doi.org/10.19072/ijet.1706784

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (44)

  1. Vinod, B. R., & Swetha, G. A. (2024). A Review of the Effects of Laser Cleaning on the Development of Corrosion and the Removal of Rust in Steel Bridges in Marine Environments. In Laser-Assisted Machining: Processes and Applications (pp. 87–113). wiley. https://doi.org/10.1002/9781394214655.ch7
  2. Jing, Z., Xu, Z., Min, Z., Haoyu, Z., Shengrong, Z. (2024). Research on the Technology of Laser Derusting and Design of Portable Laser Derusting System. In: Hung, J.C., Yen, N., Chang, JW. (eds) Frontier Computing on Industrial Applications Volume 3. FC 2023. Lecture Notes in Electrical Engineering, vol 1133. Springer, Singapore. https://doi.org/10.1007/978-981-99-9416-8_15
  3. Liu, Y., Li, C., Feng, L., & Han, X. (2024). Sensitivity analysis of the process parameters of the composite process of submerged arc surfacing and laser cladding. International Journal of Advanced Manufacturing Technology, 133(9–10), 4777–4806. https://doi.org/10.1007/s00170-024-13842-y
  4. B. Guan, L. Qin, G. Yang, Y. Ren, X. Wang (2024). Laser Polishing of Directed Energy Deposition Metal Parts: A Review. Additive Manufacturing Frontiers, Volume 3, Issue 4, 200174, ISSN 2950-4317 https://doi.org/10.1016/j.amf.2024.200174
  5. E.V. Bordachev, A.M.K. Hafiz, O.R. Tutunea-Fatan, Performance of laser polishing in finishing of metallic surfaces. Int J Adv Manuf Technol 73, 35–52, 2014, https://doi.org/10.1007/s00170-014-5761-3
  6. Zhu, G., Xu, Z., Jin, Y., Chen, X., Yang, L., Xu, J., Shan, D., Chen, Y., & Guo, B. (2022). Mechanism and application of laser cleaning: A review. In Optics and Lasers in Engineering (Vol. 157). Elsevier Ltd. https://doi.org/10.1016/j.optlaseng.2022.107130
  7. Chen, Y., Deng, G., Zhou, Q., & Feng, G. (2020). Acoustic signal monitoring in laser paint cleaning. Laser Physics, 30(6), 066001–066001. https://doi.org/10.1088/1555-6611/ab85c7
  8. Y. Cheng, P. Zou, L. Kong, B. Li, Y. Zhang (2025) Research on the effect of ultrasonic vibration-assisted laser polishing (UVLP) on Ti6Al4V surface properties and establishment of roughness prediction model, Optics & Laser Technology, Volume 186, 2025, 112714, ISSN 0030-3992, https://doi.org/10.1016/j.optlastec.2025.112714
  9. Lu, Y.-F., Zhang, Y., Song, W.-D., & Daniel. (1998). A Theoretical Model for Laser Cleaning of Microparticles in a Thin Liquid Layer. Japanese Journal of Applied Physics, 37(11A), L1330–L1330. https://doi.org/10.1143/jjap.37.l1330
  10. Frank, P., Lang, F., Mosbacher, M., J. Boneberg, & P. Leiderer. (2008). Infrared steam laser cleaning. Applied Physics A, 93(1), 1–4. https://doi.org/10.1007/s00339-008-4651-7
  11. Jang, D., Lee, J., Lee, J.-M., & Kim, D. (2008). Visualization of particle trajectories in the laser shock cleaning process. Applied Physics A, 93(1), 147–151. https://doi.org/10.1007/s00339-008-4659-z
  12. Alsaadawy, M., Dewidar, M., Said, A., Maher, I., & Shehab Eldeen, T. A. (2024). A comprehensive review of the influence of laser cutting parameters on surface and kerf quality of metals. In International Journal of Advanced Manufacturing Technology (Vol. 130, Issues 3–4, pp. 1039–1074). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/s00170-023-12768-1
  13. Rajaram, N., Sheikh-Ahmad, J., & S. Hossein Cheraghi. (2003). CO2 laser cut quality of 4130 steel. 43(4), 351–358. https://doi.org/10.1016/s0890-6955(02)00270-5
  14. Senthilkumar, V. (2014). Laser Cutting Process – A Review. ResearchGate. https://www.researchgate.net/publication/305385939_Laser_cutting_process_-_A_Review
  15. Irsel, G., & Güzey, B. N. (2021). Comparison of laser beam, oxygen, and plasma arc cutting methods in terms of their advantages and disadvantages in cutting structural steels. Journal of Physics: Conference Series, 2130(1). https://doi.org/10.1088/1742-6596/2130/1/012022
  16. Dolgova, S., Malikov, A., Golyshev, A., & Nikulina, A. (2024). The effect of laser surfacing modes on the geometrical characteristics of the single laser tracks. Obrabotka Metallov, 26(2), 57–70. https://doi.org/10.17212/1994-6309-2024-26.2-57-70
  17. Biryukov, V. (2024). Increasing the wear resistance of agricultural machinery parts by laser surfacing. E3S Web of Conferences, 592. https://doi.org/10.1051/e3sconf/202459205020
  18. Caggiano, A., Teti, R., Alfieri, V., & Caiazzo, F. (2021). Automated laser polishing for surface finish enhancement of additive-manufactured components for the automotive industry. Production Engineering, 15(1), 109–117. https://doi.org/10.1007/s11740-020-01007-1
  19. W. Wang, P. Zou, J. Xu, K. F. Ehmann (2023) Surface morphology evolution mechanisms of laser polishing in ambient gas, International Journal of Mechanical Sciences, Volume 250, 2023, 108302, ISSN 0020-7403, https://doi.org/10.1016/j.ijmecsci.2023.108302
  20. Basha, S. M., Bhuyan, M., Basha, M. M., Venkaiah, N., & Sankar, M. R. (2019). Laser polishing of 3D printed metallic components: A review on surface integrity. Materials Today: Proceedings, 26, 2047–2054. https://doi.org/10.1016/j.matpr.2020.02.443
  21. Abhishek Kumar, Harikrishnan Ramadas, Cheruvu Siva Kumar, Ashish Kumar Nath, Laser polishing of additive manufactured stainless-steel parts by line focused beam: A response surface method for improving surface finish, Journal of Manufacturing Processes, Volume 133, 2025, Pages 1310-1328, ISSN 1526-6125, https://doi.org/10.1016/j.jmapro.2024.12.028
  22. Ermergen, T., & Taylan, F. (2021). Review on Surface Quality Improvement of Additively Manufactured Metals by Laser Polishing. In Arabian Journal for Science and Engineering (Vol. 46, Issue 8, pp. 7125–7141). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/s13369-021-05658-9
  23. Haoxiang Lu, Dazhong Wang, Shujing Wu, Zili Pan, Guoqiang Wang, Guoqiang Guo, Yebing Tian, Daohui Xiang, A Review Of Laser Polishing on Ti6Al4V Based On Energy Density, Journal of Materials Processing Technology, Volume 331, 2024, 118520, ISSN 0924-0136, https://doi.org/10.1016/j.jmatprotec.2024.118520
  24. Jinan, L., Yanhe, S., Yuan, F., Jun, T., Chunyu, F., Hua, Z., & Chengbing, Z. (2020). Mechanism Research and Equipment Development of Laser Cleaning Rust. Journal of Physics: Conference Series, 1453(1). https://doi.org/10.1088/1742-6596/1453/1/012041
  25. Narayanan, V., Singh, R., & Marla, D. (2025). Optimization of Nanosecond Pulsed Laser Cleaning of Rust. Lasers in Manufacturing and Materials Processing. https://doi.org/10.1007/s40516-025-00282-z
  26. Gisario, A., Barletta, M. & Veniali, F. Laser polishing: a review of a constantly growing technology in the surface finishing of components made by additive manufacturing. Int J Adv Manuf Technol 120, 1433–1472 (2022). https://doi.org/10.1007/s00170-022-08840-x
  27. Guan, B., Qin, L., Yang, G., Ren, Y., & Wang, X. (2024). Laser polishing of directed energy deposition metal parts: A review. In Additive Manufacturing Frontiers (Vol. 3, Issue 4). Elsevier B.V. https://doi.org/10.1016/j.amf.2024.200174
  28. Zheng, Z., Wang, C., Huang, G., Feng, W., & Liu, D. (2021). Effect of defocused nanosecond laser paint removal on mild steel substrate in the ambient atmosphere. Materials, 14(20). https://doi.org/10.3390/ma14205969
  29. Narayanan, V., Singh, R. K., & Marla, D. (2018). Laser cleaning for rust removal on mild steel: An experimental study on surface characteristics. MATEC Web of Conferences, 221. https://doi.org/10.1051/matecconf/201822101007
  30. He, Y., Cai, X., & Ye, J. (2023). Research on pulse laser cleaning and rust removal technology in power systems. AIP Advances, 13(9). https://doi.org/10.1063/5.0155263
  31. Garcia-Fernandez, J., Salguero, J., Batista, M., Vazquez-Martinez, J. M., & del Sol, I. (2024). Laser Surface Texturing of Cutting Tools for Improving the Machining of Ti6Al4V: A Review. In Metals (Vol. 14, Issue 12). Multidisciplinary Digital Publishing Institute (MDPI). https://doi.org/10.3390/met14121422
  32. Klich, L., Marciniak, M., & Sikorska-Czupryna, S. (2025). Optimization of the laser cutting process by integrating an automatic storage and loading system with enterprise resource management integration. Advances in Science and Technology Research Journal, 19(4), 365–376. https://doi.org/10.12913/22998624/200725
  33. Ni, C., Zhu, J., Zhang, B., An, K., Wang, Y., Liu, D., Lu, W., Zhu, L., & Liu, C. (2025). Recent advances in laser powder bed fusion of Ti–6Al–4V alloys: microstructure, mechanical properties, and machinability. In Virtual and Physical Prototyping (Vol. 20, Issue 1). Taylor and Francis Ltd. https://doi.org/10.1080/17452759.2024.2446952
  34. Wang, G., Deng, J., Lei, J., Tang, W., Zhou, W., & Lei, Z. (2024). Multi-Objective Optimization of Laser Cleaning Quality of Q390 Steel Rust Layer Based on Response Surface Methodology and NSGA-II Algorithm. Materials, 17(13). https://doi.org/10.3390/ma17133109
  35. Ngadiono, Y., Saputra, D. A., Setiadi, B. R., & Pardjono, P. (2025). Taguchi’s Method for Optimum Cutting of Acrylic Materials on a 40-Watt CNC Laser Cutting Machine. TEM Journal, 933–939. https://doi.org/10.18421/TEM141-82
  36. Naresh, & Khatak, P. (2022). Laser cutting technique: A literature review. Materials for Today: Proceedings, 56, 2484–2489. https://doi.org/10.1016/j.matpr.2021.08.250
  37. Krajcar, D. (2014). Comparison of metal water jet cutting with laser and plasma cutting. Procedia Engineering, 69, 838–843. https://doi.org/10.1016/j.proeng.2014.03.061
  38. D'aurelio, G., Chita, G., & Cinquepalmi, M. (n.d.). Laser surface cleaning, de-rusting, de-painting, and de-oxidizing. Appl. Phys. A, 69. https://doi.org/10.1007/s003399900373
  39. Di Kang, Ping Zou, Hao Wu, Wenjie Wang, Jilin Xu, Research on ultrasonic vibration-assisted laser polishing of the 304 stainless steel, Journal of Manufacturing Processes, Volume 62, 2021, Pages 403-417, ISSN 1526-6125, https://doi.org/10.1016/j.jmapro.2020.12.009
  40. Manco, E., Cozzolino, E., & Astarita, A. (2022). Laser polishing of additively manufactured metal parts: a review. In Surface Engineering (Vol. 38, Issue 3, pp. 217–233). Taylor and Francis Ltd. https://doi.org/10.1080/02670844.2022.2072080
  41. Belosludtsev, A., Bitinaitis, I., Baltrušaitis, K., & Rodin, A. M. (n.d.). Investigation of the laser cleaning process for IBS grids in optical coating technology. https://doi.org/10.1007/s00170-021-07035-0/Published
  42. Zhang, H., Zhang, J., Zhang, X., Zhu, S., & Zhang, M. (2023). Analysis of Laser Cleaning and Rust Removal Technology for Substation Isolator Switches. Journal of Physics: Conference Series, 2488(1). https://doi.org/10.1088/1742-6596/2488/1/012033
  43. Wang, W. (2023). Surface defects detection in metal materials repaired by laser surfacing of seal welds. Journal of Measurements in Engineering, 11(3), 343–357. https://doi.org/10.21595/jme.2023.23316
  44. Yue, L., Wang, Z., & Li, L. (2012). Multiphysics modelling and simulation of dry laser cleaning of micro-slots with particle contaminants. Journal of Physics D Applied Physics, 45(13), 135401–135401. https://doi.org/10.1088/0022-3727/45/13/135401