KaydedilenlerDerginizi ekleyin

Dergiler / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2026 / Cilt: 14 Sayı: 1

Elektrikli Araç Şarj İstasyonlarında Güç Elektroniği Topolojileri: Klasik Yapılardan Gelişmiş Çözümlere

Power Electronics Topologies in Electric Vehicle Charging Stations: From Conventional Structures to Advanced Solutions

Uğur Fesli(GAZİ ÜNİVERSİTESİ, TEKNİK BİLİMLER MESLEK YÜKSEKOKULU)0000-0003-3348-9140
Sayfa
210–229
Yayın Tarihi
2026-02-17
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuç olarak, yüksek verimli rezonanslı ve modüler çok seviyeli topolojilerin (örneğin DAB, LLC, ANPC, MMC) yeni nesil ultra hızlı şarj sistemleri için en uygun çözümler olduğu belirlenmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Elektrikli araçların (EV) yaygınlaşmasıyla birlikte, yüksek verimli, güvenli ve hızlı şarj altyapılarına olan ihtiyaç artmaktadır.
📊
Temel Bulgular & Veri:Bu durum, güç elektroniği tabanlı dönüştürücü topolojilerinin performans, maliyet, kompaktlık ve enerji yönetimi açısından yeniden değerlendirilmesini gerektirmiştir.
💡
Sonuç & Katkı:Sonuç olarak, yüksek verimli rezonanslı ve modüler çok seviyeli topolojilerin (örneğin DAB, LLC, ANPC, MMC) yeni nesil ultra hızlı şarj sistemleri için en uygun çözümler olduğu belirlenmiştir.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Güç Elektroniği · Dönüştürücü Topolojileri · V2G

Özet

Elektrikli araçların (EV) yaygınlaşmasıyla birlikte, yüksek verimli, güvenli ve hızlı şarj altyapılarına olan ihtiyaç artmaktadır. Bu durum, güç elektroniği tabanlı dönüştürücü topolojilerinin performans, maliyet, kompaktlık ve enerji yönetimi açısından yeniden değerlendirilmesini gerektirmiştir. Bu çalışmada, elektrikli araç şarj istasyonlarında kullanılan güç dönüştürücü topolojileri sistematik olarak analiz edilmiştir. İlk olarak, AC ve DC tabanlı şarj sistemleri yapı, işlev ve uygulama seviyelerine göre sınıflandırılmış; ardından, her topolojinin enerji akışı yönü (tek/çift yönlü), izolasyon durumu, verimlilik, kontrol zorlukları ve uygulama gücü gibi teknik kriterler baz alınarak karşılaştırılmıştır. Çalışmada, pasif diyot köprü, aktif PFC, Vienna doğrultucu, LLC rezonanslı, Phase-Shifted Full Bridge (PSFB), Dual Active Bridge (DAB), NPC, ANPC ve MMC gibi farklı güç dönüştürücü yapıları, literatürdeki en son gelişmeler ışığında incelenmiştir. Ayrıca, çift yönlü enerji aktarımına imkan tanıyan Vehicle-to-Grid (V2G), Vehicle-to-Home (V2H) ve Vehicle-to-Load (V2L) sistemleri, akıllı şebeke entegrasyonu ve enerji yönetimi konularında ele alınmıştır. Sonuç olarak, yüksek verimli rezonanslı ve modüler çok seviyeli topolojilerin (örneğin DAB, LLC, ANPC, MMC) yeni nesil ultra hızlı şarj sistemleri için en uygun çözümler olduğu belirlenmiştir.

Abstract

With the widespread adoption of electric vehicles (EVs), the need for efficient, safe, and fast-charging infrastructures has significantly increased. This trend has necessitated a reevaluation of power electronics-based converter topologies in terms of performance, cost, compactness, and energy management. In this study, the power converter topologies used in electric vehicle charging stations are systematically analyzed. First, AC- and DC-based charging systems are classified according to their structure, functionality, and application levels. Then, each topology is compared based on key technical criteria such as the direction of energy flow (unidirectional/bidirectional), isolation type, efficiency, control complexity, and power range. The study examines various converter configurations including passive diode bridge, active power factor correction (PFC), Vienna rectifier, LLC resonant, Phase-Shifted Full Bridge (PSFB), Dual Active Bridge (DAB), Neutral Point Clamped (NPC), Active NPC (ANPC), and Modular Multilevel Converter (MMC), in light of the latest developments in the literature. Furthermore, bidirectional energy transfer systems such as Vehicle-to-Grid (V2G), Vehicle-to-Home (V2H), and Vehicle-to-Load (V2L) are discussed within the context of smart grid integration and energy management. As a result, high-efficiency resonant and modular multilevel topologies (e.g., DAB, LLC, ANPC, MMC) are identified as the most suitable solutions for next-generation ultra-fast charging systems.

🔖

Bu Makaleye Atıf Yap

Fesli, U. (2026). Elektrikli Araç Şarj İstasyonlarında Güç Elektroniği Topolojileri: Klasik Yapılardan Gelişmiş Çözümlere. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 14 Sayı: 1, 210–229. https://doi.org/10.29109/gujsc.1813580

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (71)

  1. R. Rana, T. S. Saggu, S. S. Letha, and F. I. Bakhsh, “V2G based bidirectional EV charger topologies and its control techniques: a review,” Nov. 01, 2024, Springer Nature. doi: 10.1007/s42452-024-06297-z.
  2. S. Rivera et al., “Charging Infrastructure and Grid Integration for Electromobility,” Proceedings of the IEEE, vol. 111, no. 4, pp. 371–396, Apr. 2023, doi: 10.1109/JPROC.2022.3216362.
  3. M. Masud Rana et al., “Comprehensive Review on the Charging Technologies of Electric Vehicles (EV) and Their Impact on Power Grid,” 2025, Institute of Electrical and Electronics Engineers Inc. doi: 10.1109/ACCESS.2025.3538663.
  4. J. Liang, Y. Tong, Z. Yu, Y. Yao, Z. Dong, and L. Zhao, “Multi-mode control of three-phase LLC resonant converter based on planar integrated magnetic core,” Journal of Power Electronics, 2025, doi: 10.1007/s43236-025-01087-1.
  5. M. Dhananjaya, “Improved Cascaded DC–DC Boost Converter With Multiple DC Source and Reduced Part Count,” IEEE Transactions on Industrial Electronics, 2025, doi: 10.1109/TIE.2025.3594419.
  6. R. K. Iyer et al., “A Bidirectional GaN-Based Flying Capacitor Multilevel Converter for Electric Vehicle Charging,” in Wide Bandgap Power Electronics, Cham: Springer Nature Switzerland, 2025, pp. 193–214. doi: 10.1007/978-3-031-78631-0_8.
  7. J. Dinis, J. Alberto, and A. J. M. Cardoso, “Optimization of Resonant Arrays for Dynamic Wireless Power Transfer Using Adaptive Termination,” IEEE Open Journal of the Industrial Electronics Society, 2025, doi: 10.1109/OJIES.2025.3585439.
  8. P. V. Harisyam, S. Kasicheyanula, S. Mathapati, and K. Basu, “A Three-phase MVAC to Multi-port LVDC Converter with High Frequency Isolation for Fast DC Charging Station for EVs,” in 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, Institute of Electrical and Electronics Engineers Inc., 2023, pp. 33–38. doi: 10.1109/ECCE53617.2023.10362814.
  9. R. Jemmie Sharone and P. Latha, “Advanced Power Electronics Design Using an Optimized Coupled Inductor Converter for Sustainable and Efficient PV-Based Electric Vehicle Charging Station,” Iranian Journal of Science and Technology - Transactions of Electrical Engineering, 2025, doi: 10.1007/s40998-025-00881-8.
  10. E. Sortomme and M. A. El-Sharkawi, “Optimal combined bidding of vehicle-to-grid ancillary services,” IEEE Trans Smart Grid, vol. 3, no. 1, 2012, doi: 10.1109/TSG.2011.2170099.
  11. S. S. G. Acharige, M. E. Haque, M. T. Arif, N. Hosseinzadeh, K. N. Hasan, and A. M. T. Oo, “Review of Electric Vehicle Charging Technologies, Standards, Architectures, and Converter Configurations,” IEEE Access, vol. 11, 2023, doi: 10.1109/ACCESS.2023.3267164.
  12. V. N. Saraswathi and V. P. Ramachandran, “A comprehensive review on charger technologies, types, and charging stations models for electric vehicles,” Oct. 30, 2024, Elsevier Ltd. doi: 10.1016/j.heliyon.2024.e38945.
  13. P. Arévalo, D. Ochoa-Correa, and E. Villa-Ávila, “Towards Energy Efficiency: Innovations in High-Frequency Converters for Renewable Energy Systems and Electric Vehicles,” Mar. 01, 2025, Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/vehicles7010001.
  14. G. Anusha, A. V. V. Sudhakar, R. R. R. Deshmukh, and C. H. H. Basha, “A bibliometric analysis of research trends in electric vehicle power electronics: global perspectives and future directions,” May 01, 2025, Springer Nature. doi: 10.1007/s42452-025-06996-1.
  15. K. Zeb, M. Sadiq, W. Uddin, M. M. Gulzar, M. Alqahtani, and M. Khalid, “A Systematic review of topologies, control strategies, challenges, recent developments, and future prospects on emerging electric vehicle chargers,” Energy Strategy Reviews, vol. 61, p. 101846, 2025, doi: https://doi.org/10.1016/j.esr.2025.101846.
  16. M. S. H. Lipu et al., “Review of electric vehicle converter configurations, control schemes and optimizations: Challenges and suggestions,” 2021. doi: 10.3390/electronics10040477.
  17. M. Farsijani, S. Abbasian, H. Hafezi, M. T. Bina, and K. Abbaszadeh, “Design and Implementation of a Single Switch High Gain Boost Topology: Structure, Ripple Control and ZCS,” IEEE Access, vol. 11, 2023, doi: 10.1109/ACCESS.2022.3233920.
  18. P. R. Mohanty, A. K. Panda, and D. Das, “An active PFC boost converter topology for power factor correction,” in 12th IEEE International Conference Electronics, Energy, Environment, Communication, Computer, Control: (E3-C3), INDICON 2015, 2016. doi: 10.1109/INDICON.2015.7443118.
  19. J. Feng, Y. Yao, and Z. Liu, “Developing an optimal building strategy for electric vehicle charging stations: automaker role,” Environ Dev Sustain, vol. 27, no. 5, pp. 12091–12151, May 2025, doi: 10.1007/s10668-024-05326-6.
  20. H.-G. Koh, Y.-J. Choi, and I. Sami, “Robust Super Twisting Sliding Mode Control based Model Predictive Current Control of Totem Pole Bridgeless Boost PFC Converter,” in IECON 2024 - 50th Annual Conference of the IEEE Industrial Electronics Society, 2024, pp. 1–6. doi: 10.1109/IECON55916.2024.10905327.
  21. A. Garrigós and F. Sobrino-Manzanares, “Interleaved multi-phase and multi-switch boost converter for fuel cell applications,” Int J Hydrogen Energy, vol. 40, no. 26, pp. 8419–8432, 2015, doi: https://doi.org/10.1016/j.ijhydene.2015.04.132.
  22. M. Kasper, D. Bortis, and J. W. Kolar, “Classification and comparative evaluation of PV panel-integrated DC-DC converter concepts,” IEEE Trans Power Electron, vol. 29, no. 5, 2014, doi: 10.1109/TPEL.2013.2273399.
  23. I. Bashir, A. H. Bhat, and S. Ahmad, “A review on soft switched PFC boost converter for efficient lowering of switching losses,” Electric Power Systems Research, vol. 242, p. 111430, 2025, doi: https://doi.org/10.1016/j.epsr.2025.111430.
  24. J. Han, X. Zhou, S. Lu, and P. Zhao, “A Three-Phase Bidirectional Grid-Connected AC/DC Converter for V2G Applications,” Journal of Control Science and Engineering, vol. 2020, 2020, doi: 10.1155/2020/8844073.
  25. J. Zeng, G. Zhang, S. S. Yu, B. Zhang, and Y. Zhang, “LLC resonant converter topologies and industrial applications -A review,” 2020. doi: 10.23919/CJEE.2020.000021.
  26. K. Drobnic et al., “An Output Ripple-Free Fast Charger for Electric Vehicles Based on Grid-Tied Modular Three-Phase Interleaved Converters,” IEEE Trans Ind Appl, vol. 55, no. 6, pp. 6102–6114, 2019, doi: 10.1109/TIA.2019.2934082.
  27. K. Wang, Z. Zheng, and Y. Li, “A Novel Carrier-Overlapped PWM Method for Four-Level Neutral-Point Clamped Converters,” IEEE Trans Power Electron, vol. 34, no. 1, pp. 7–12, 2019, doi: 10.1109/TPEL.2018.2833148.
  28. G. Rajendran, C. A. Vaithilingam, N. Misron, K. Naidu, and M. R. Ahmed, “Voltage oriented controller based vienna rectifier for electric vehicle charging stations,” IEEE Access, vol. 9, 2021, doi: 10.1109/ACCESS.2021.3068653.
  29. D. Jiang, F. Luo, D. Boroyevich, R. Lai, F. F. Wang, and S. Wang, “Study of Conducted EMI Reduction for Three-Phase Active Front-End Rectifier,” IEEE Trans Power Electron, vol. 26, no. 12, 2011, doi: 10.1109/TPEL.2010.2053219.
  30. O. Aissa, S. Moulahoum, ilhami Colak, B. Babes, and N. Kabache, “Design and real time implementation of three-phase three switches three levels Vienna rectifier based on intelligent controllers,” Appl Soft Comput, vol. 56, pp. 158–172, 2017, doi: https://doi.org/10.1016/j.asoc.2017.03.001.
  31. U. Fesli, S. Bayhan, N. Guler, and H. Komurcugil, “Lyapunov-Function Based Control Technique for a Single-Phase Grid-Connected Five-Level Active Neutral Point Clamped Flying Capacitor Inverter with LCL Filter,” in CPE-POWERENG 2023 - 17th IEEE International Conference on Compatibility, Power Electronics and Power Engineering, 2023. doi: 10.1109/CPE-POWERENG58103.2023.10227484.
  32. Y. Wu et al., “A 150-kW 99% Efficient All-Silicon-Carbide Triple-Active-Bridge Converter for Solar-Plus-Storage Systems,” IEEE J Emerg Sel Top Power Electron, vol. 10, no. 4, pp. 3496–3510, 2022, doi: 10.1109/JESTPE.2020.3044572.
  33. M. Y. Metwly, M. S. Abdel-Majeed, A. S. Abdel-Khalik, R. A. Hamdy, M. S. Hamad, and S. Ahmed, “A Review of Integrated On-Board EV Battery Chargers: Advanced Topologies, Recent Developments and Optimal Selection of FSCW Slot/Pole Combination,” 2020. doi: 10.1109/ACCESS.2020.2992741.
  34. J. Yuan, L. Dorn-Gomba, A. D. Callegaro, J. Reimers, and A. Emadi, “A review of bidirectional on-board chargers for electric vehicles,” 2021. doi: 10.1109/ACCESS.2021.3069448.
  35. M. R. Khalid, I. A. Khan, S. Hameed, M. S. J. Asghar, and J. S. Ro, “A Comprehensive Review on Structural Topologies, Power Levels, Energy Storage Systems, and Standards for Electric Vehicle Charging Stations and Their Impacts on Grid,” 2021. doi: 10.1109/ACCESS.2021.3112189.
  36. J. A. P. Lopes, F. J. Soares, and P. M. R. Almeida, “Integration of electric vehicles in the electric power system,” Proceedings of the IEEE, vol. 99, no. 1, 2011, doi: 10.1109/JPROC.2010.2066250.
  37. C. Liu, K. T. Chau, D. Wu, and S. Gao, “Opportunities and challenges of vehicle-to-home, vehicle-to-vehicle, and vehicle-to-grid technologies,” Proceedings of the IEEE, vol. 101, no. 11, 2013, doi: 10.1109/JPROC.2013.2271951.
  38. N. O. Nagel, E. O. Jåstad, and T. Martinsen, “The grid benefits of vehicle-to-grid in Norway and Denmark: An analysis of home- and public parking potentials,” Energy, vol. 293, 2024, doi: 10.1016/j.energy.2024.130729.
  39. F. Boutouta, A. Sharida, K. Abdellah, and A. Beladel, “Model Predictive Current Control for Grid-Connected Bi-directional EV Battery Charging System,” in 4th International Conference on Smart Grid and Renewable Energy, SGRE 2024 - Proceedings, 2024. doi: 10.1109/SGRE59715.2024.10428858.
  40. A. Saadaoui and M. Ouassaid, “Super-twisting sliding mode control approach for battery electric vehicles ultra-fast charger based on Vienna rectifier and three-phase interleaved DC/DC buck converter,” J Energy Storage, vol. 84, 2024, doi: 10.1016/j.est.2024.110854.
  41. S. A. Gorji, H. G. Sahebi, M. Ektesabi, and A. B. Rad, “Topologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview,” IEEE Access, vol. 7, pp. 117997–118019, 2019, doi: 10.1109/ACCESS.2019.2937239.
  42. Md. T. Shahed and A. B. M. H. Rashid, “Battery charging technologies and standards for electric vehicles: A state-of-the-art review, challenges, and future research prospects,” Energy Reports, vol. 11, pp. 5978–5998, 2024, doi: https://doi.org/10.1016/j.egyr.2024.05.062.
  43. P. F. Kocybik and K. N. Bateson, “Digital control of a ZVS full-bridge DC-DC converter,” in Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC’95, 1995, pp. 687–693 vol.2. doi: 10.1109/APEC.1995.469094.
  44. C.-W. Park and S.-K. Han, “Analysis and Design of an Integrated Magnetics Planar Transformer for High Power Density LLC Resonant Converter,” IEEE Access, vol. 9, pp. 157499–157511, 2021, doi: 10.1109/ACCESS.2021.3125262.
  45. D. Howell et al., “Enabling Fast Charging: A Technology Gap Assessment,” 2017.
  46. Z. Huang et al., “A Novel Power Market Mechanism Based on Blockchain for Electric Vehicle Charging Stations,” Electronics (Basel), vol. 10, no. 3, 2021, doi: 10.3390/electronics10030307.
  47. A. Lipman, “UC Office of the President ITS reports Title Electric Vehicle Charge Management Strategies to Benefit the California Electricity Grid Permalink https://escholarship.org/uc/item/19n0s7np Publication Date”, doi: 10.7922/G2WS8RK2.
  48. S. Alatai et al., “A Review on State-of-the-Art Power Converters: Bidirectional, Resonant, Multilevel Converters and Their Derivatives,” Applied Sciences, vol. 11, no. 21, 2021, doi: 10.3390/app112110172.
  49. J. Rodríguez, J. S. Lai, and F. Z. Peng, “Multilevel inverters: A survey of topologies, controls, and applications,” IEEE Transactions on Industrial Electronics, vol. 49, no. 4, 2002, doi: 10.1109/TIE.2002.801052.
  50. A. Khoshkbar Sadigh, V. Dargahi, R. Naderi, and K. A. Corzine, “Active Voltage Balancing and Thermal Performance Analysis of Dual Flying-Capacitor Active Neutral-Point-Clamped (DFC-ANPC) Inverters,” IEEE Trans Ind Appl, vol. 57, no. 1, 2021, doi: 10.1109/TIA.2020.3036570.
  51. B. P. McGrath and D. G. Holmes, “Multicarrier PWM strategies for multilevel inverters,” IEEE Transactions on Industrial Electronics, vol. 49, no. 4, 2002, doi: 10.1109/TIE.2002.801073.
  52. T. A. Meynard and H. Foch, “Multi-level conversion: High voltage choppers and voltage-source inverters,” in PESC Record - IEEE Annual Power Electronics Specialists Conference, 1992. doi: 10.1109/PESC.1992.254717.
  53. D. G. Holmes and T. A. Lipo, Pulse Width Modulation for Power Converters. 2010. doi: 10.1109/9780470546284.
  54. Z. Yu and J. Long, “Review on Advanced Model Predictive Control Technologies for High-Power Converters and Industrial Drives,” 2024. doi: 10.3390/electronics13244969.
  55. M. A. Alam, A. F. Minai, and F. I. Bakhsh, “Isolated bidirectional DC-DC Converter: A topological review,” e-Prime - Advances in Electrical Engineering, Electronics and Energy, vol. 8, Jun. 2024, doi: 10.1016/j.prime.2024.100594.
  56. E. E. Henao-Bravo, C. A. Ramos-Paja, A. J. Saavedra-Montes, D. González-Montoya, and J. Sierra-Pérez, “Design Method of Dual Active Bridge Converters for Photovoltaic Systems with High Voltage Gain,” Energies (Basel), vol. 13, no. 7, 2020, doi: 10.3390/en13071711.
  57. M. E. Ahamed and S. Senthilkumar, “CSEIT172139 | Review of Bidirectional DC-DC Converters,” 2017. [Online]. Available: www.ijsrcseit.com
  58. A. Tayri and X. Ma, “Grid Impacts of Electric Vehicle Charging: A Review of Challenges and Mitigation Strategies,” Energies (Basel), vol. 18, no. 14, 2025, doi: 10.3390/en18143807.
  59. Y. Calvinus, F. Wiryanata, and H. Tanujaya, “Battery charging management system design with voltage, current and temperature monitoring features in electric vehicles,” in IOP Conference Series: Materials Science and Engineering, 2020. doi: 10.1088/1757-899X/1007/1/012174.
  60. S. Mohanty et al., “Demand Side Management of Electric Vehicles in Smart Grids: A Survey on Strategies, Challenges, Modelling, and Optimization,” Energy Reports, vol. 8, pp. 12466–12490, Oct. 2022, doi: 10.1016/j.egyr.2022.09.023.
  61. F. Iov, W. Zhao, and T. Kerekes, “Robust PLL-Based Grid Synchronization and Frequency Monitoring,” Energies (Basel), vol. 16, no. 19, 2023, doi: 10.3390/en16196856.
  62. L. Calogero, M. Pagone, F. Cianflone, E. Gandino, C. Karam, and A. Rizzo, “Neural Adaptive MPC With Online Metaheuristic Tuning for Power Management in Fuel Cell Hybrid Electric Vehicles,” IEEE Transactions on Automation Science and Engineering, vol. 22, pp. 11540–11553, 2025, doi: 10.1109/TASE.2025.3534402.
  63. S. A. Gorji, H. G. Sahebi, M. Ektesabi, and A. B. Rad, “Topologies and control schemes of bidirectional DC–DC power converters: An overview,” IEEE Access, vol. 7, 2019, doi: 10.1109/ACCESS.2019.2937239.
  64. V. Rathore, S. R. P. Reddy, and K. Rajashekara, “An Isolated Multilevel DC-DC Converter Topology With Hybrid Resonant Switching for EV Fast Charging Application,” IEEE Trans Ind Appl, vol. 58, no. 5, 2022, doi: 10.1109/TIA.2022.3168504.
  65. W. Abd Halim, S. Ganeson, M. Azri, and T. N. A. Tengku Azam, “Review of multilevel inverter topologies and its applications,” 2016.
  66. S. Rivera, B. Wu, S. Kouro, V. Yaramasu, and J. Wang, “Electric Vehicle Charging Station Using a Neutral Point Clamped Converter with Bipolar DC Bus,” IEEE Transactions on Industrial Electronics, vol. 62, no. 4, 2015, doi: 10.1109/TIE.2014.2348937.
  67. L. Jorge, H. Concepcion, M. A. Arjona, M. Lesedi, and C. Ambrish, “Performance Evaluation of an Active Neutral-Point-Clamped Multilevel Converter for Active Filtering in G2V-V2G and V2H Applications,” IEEE Access, vol. 10, 2022, doi: 10.1109/ACCESS.2022.3167694.
  68. A. R. Aghoy, J. Ebrahimi, M. Pahlevani, and A. Bakhshai, “Feasibility Review of Multilevel Converters in Electric Vehicle Chargers,” in 2024 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), 2024, pp. 495–500. doi: 10.1109/CCECE59415.2024.10667079.
  69. C. Xu, J. He, and L. Lin, “Research on Capacitor-Switching Semi-Full-Bridge Submodule of Modular Multilevel Converter Using Si-IGBT and SiC-MOSFET,” IEEE J Emerg Sel Top Power Electron, vol. 9, no. 4, pp. 4814–4825, 2021, doi: 10.1109/JESTPE.2020.3034451.
  70. B. Muhammetoglu and M. Jamil, “Dual Active Bridge Converter with Interleaved and Parallel Operation for Electric Vehicle Charging,” Energies (Basel), vol. 17, no. 17, 2024, doi: 10.3390/en17174258.
  71. A. Jafari, M. Samizadeh Nikoo, F. Karakaya, N. Perera, and E. Matioli, “97.4%-Efficient All-GaN Dual-Active-Bridge Converter with High Step-up High-Frequency Matrix Transformer,” Oct. 2020.