Dergiler / EMO Bilimsel Dergi / 2011 / Cilt: 1 Sayı: 2

Hesaplanabilir AC Direnç Standardının 5 MHz'e Kadar Modellenmesi ve Üretilmesi / Modelling and Development of Calculable AC Resistor Standard Up To 5 MHz

Sayfa
75–82
Yayın Tarihi
2011-12-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is found that the stability of 1000 W bifilar type AC resistance standard is 1 ppm/day as a result of DC measurements.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Özet Bu çalı s mada, AC direnç kalibrasyonları için Uluslar arası alanda birincil seviye standart olarak kullanılan 1000 W bifilar tip hesaplanabilir AC direnç standardının üretilmesi amaçlanmı s tır. 1000 W bifilar tip hesaplanabilir AC direnç standardının matematiksel modellemesi Matlab ® programı kullanılarak 5 MHz'e kadar yapılmı s tır.
📊
Temel Bulgular & Veri:Matematiksel modelleme kullanılarak 1000 W bifilar tip hesaplanabilir AC direncin geometrik boyutları belirlenlenmi s ve hesaplanabilir AC direncin üretimi gerçekle s tirilmi s tir.
💡
Sonuç & Katkı:It is found that the stability of 1000 W bifilar type AC resistance standard is 1 ppm/day as a result of DC measurements.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Hesaplanabilir AC direnç · İzlenebilirlik · Kararlılık

Özet

Özet Bu çalı s mada, AC direnç kalibrasyonları için Uluslar arası alanda birincil seviye standart olarak kullanılan 1000 W bifilar tip hesaplanabilir AC direnç standardının üretilmesi amaçlanmı s tır. 1000 W bifilar tip hesaplanabilir AC direnç standardının matematiksel modellemesi Matlab ® programı kullanılarak 5 MHz'e kadar yapılmı s tır. Matematiksel modelleme kullanılarak 1000 W bifilar tip hesaplanabilir AC direncin geometrik boyutları belirlenlenmi s ve hesaplanabilir AC direncin üretimi gerçekle s tirilmi s tir. Hesaplanabilir AC dirence DC akım uygulanarak direncin kararlılı g ına etki eden hataların belirlenmesi için deneysel çalı s malar yapılmı s tır. 1000 W bifilar tip hesaplanabilir AC direnç standardının DC akım uygulanarak yapılan ölçümleri, TÜB TAK UME'de kurulu Quantum-Hall sistemine izlenebilir olarak gerçekle s tirilmi s tir. Tasarımı gerçekle s tirilen hesaplanabilir AC dirence, DC akım uygulanarak yapılan ölçümler sonucunda 1 ppm/gün kararlılık de g eri elde edilmi s tir. Abstract In this study, it is aimed to fabricate 1000 W bifilar type AC calculable resistance standard used as primary level reference AC resistance standard internationally. Mathematical modeling of 1000 W bifilar type AC calculable resistance standard is performed in Matlab ® program up to 5 MHz. Geometrical dimensions of 1000 W bifilar type AC calculable resistance standard is determined using the mathematical modeling and fabricated according to the geometrical dimensions defined in the mathematical modelling. Experimental studies are performed to define the parameters affecting the stability of the resistance standard by applying a DC current onto the resistance standard. DC resistance measurements of 1000 W bifilar type AC calculable resistance standard are traceable to the Quantum-Hall resistance installed in TÜB TAK UME (National Metrology Institute of Turkey). It is found that the stability of 1000 W bifilar type AC resistance standard is 1 ppm/day as a result of DC measurements.

🔖

Bu Makaleye Atıf Yap

Çınar, M., Dolma, A., Gülmez, Y., Sakarya, H., Erkan, Ö., Celep, M. (2011). Hesaplanabilir AC Direnç Standardının 5 MHz'e Kadar Modellenmesi ve Üretilmesi / Modelling and Development of Calculable AC Resistor Standard Up To 5 MHz. EMO Bilimsel Dergi, Cilt: 1 Sayı: 2, 75–82. https://ajindex.com/articles/1390456

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. .Gibbings D.L., ''A design for resistors of calculable AC/DC resistance ratio'', IEEE Trans. Instrum.Meas., Vol.110, No.2, s.335-347, (1963).Haddad, R.J., ”A Resistor Calculable from DC to 105 rad/s.”, Msc. Thesis, School of Engineering and Applied Science, George Washington University, (1969).Graetsh V., ''Praezisionswiderstaende für Gelich und Wechselstrom'', PTB-Mitteilungen, 90 26-30, (1980).Koller H., ''Prazisionswiderstaende mit berechenbarem Frequenzeinfluss'', Elektrie 29, s.612-615, (1975).PTB-Report, ''Widerstaende mit berechenbarem Frequenzeinfluss'', (1974).Schurr J, Wood B. M., Overney F, ”Lineer frequency dependence in AC resistance measurement”, IEEE Trans. Instrum. Meas., 54 512-5, (2005).Elmquist R.E., ''Calculable coaxial resistors for precision measurements'', IEEE Trans. Instrum. Meas., 49 210-5, (2000).Kucera J, Vollmer E, Schurr J., Bohacek J, “Calculable resistors of coaxial design” Meas.Sc.Technol., 095104, (2009).Isabellenhütte company, ''Isaohm Technical information''.Semyenov Y.P., ''Bifilar AC-DC Resistor Using a Microwire'', IEEE Trans. Instrum. Meas., Vol.46, No.2, (1997).Ku Y.S., Hsu C.M., Pang H.L., Hsiao J., Nakanishi ''DC & AC resistance measurements center for measurements standarts'', XVII. IMEKO World Congress, Dubrovnik, Croatia, 54 533-7, (2005).Gülmez Y., Gülmez G., Turhan E., Özkan T., Çınar M., Sözen L., ”New Design of Calculable Resistor”, Precision Electromagnetic Measurements. Conference, Page 348-349, (2002).Kim H.J., Lee R.D., Semenov Y.P., ”Resistor with calculable dependencies up to 1 MHz”, IEEE Trans. Instrum. Meas., Vol.56, No.2, (2007).Yasuhiro N., Hiroyuki F., ''An analysis on the uncertainty of calculating the time constant of the quadrifilar reversed resisitor'', AIST Bulletin of Metrology, Vol.3, No.3, (2004).Bohacek J., ”References resistors for calibration of wireband LCR meters”, XVIII Imeko Word Congress, Brazil, (2006).Arnold A.H.M., Ph.D. D.Eng. Associate Member.,''Nickel-Chromium-Aluminium-Copper Resistance Wire" National Physical Laboratory, Paper No.2084M, (1956).Çınar M., Dolma A., Gülmez Y.,”Bifilar Tip Hesaplanabilir AC Direncin Modellenmesi ve Gelistirilmesi”, International Union of Radio Science, KKTC, (2010).Delahaye F., ”DC and AC Techniques for Resistance and Impedance Measurements”, Metrologia, 29 81, (1992).Baytaroglu, S., Kesikoglu, H., Özbay H.Ö., “Metrolojide Kullanılan Temel ve Genel Terimler Sözlügü”, Ulusal Metroloji Enstitüsü, (1994).