Dergiler / EMO Bilimsel Dergi / 2026 / Cilt: 2 Sayı: 3

Kafesli Asenkron Motorlarda Maliyet Kısıtı Altında Rotor Çubuklarının Analizi / The Analysis of The Squirrel Cage Induction Motor Rotor Bars under the Cost Constraint

Sayfa
23–28
Yayın Tarihi
2012-10-09
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Numerical results and their comparison are given for different rotor bar geometries in the paper.Also, rotor bar leakage inductance values are calculated analytically and their effects on the motor operation are discussed.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Özet Bu makalede günümüzde endüstride yaygın olarak kullanılan asenkron motorların performan s analizine yönelik bir çalışma sunulmaktadır .
📊
Temel Bulgular & Veri:Test motoru olarak üç fazlı 4 kW gücünde bir kafesli asenkron motor kullanılmıştır.
💡
Sonuç & Katkı:Numerical results and their comparison are given for different rotor bar geometries in the paper.Also, rotor bar leakage inductance values are calculated analytically and their effects on the motor operation are discussed.
🔬Tür:Laboratuvar & Saha Deneyi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:kafesli asenkron motor · rotor oluğu · sonlu elemanlar yöntemi

Özet

Özet Bu makalede günümüzde endüstride yaygın olarak kullanılan asenkron motorların performan s analizine yönelik bir çalışma sunulmaktadır . Test motoru olarak üç fazlı 4 kW gücünde bir kafesli asenkron motor kullanılmıştır. Çalışmada aynı kesit alanı olan rotor çubukları ve aynı iletken malzeme kullanılarak oluk biçimleri değiştirilmiştir. M otorun analizleri farklı rotor oluk biçimleri için hem analitik hem de sayısal olar ak incelenmiştir. Böylelikle motor üretim maliyeti aynı olan daha üstün işletme özelliğine sahip rotor oluk geometrisi belirlenmiştir . Farklı oluk biçimleri ne ait sayısal sonuçlar ve bu nların karşılaştırmaları makalede verilmiştir.Aynı zamanda rotor çubuk kaçak indüktansları analitik olarak hesaplanarak motor işletmesi üzerine etkileri tartışılmıştır . Abstract In this paper, induction motors, which will be commonly used, have been presented due to their performances. A Three phase, 4 kW squirrel cage induction motor is chosen as a test motor. In this study, the rotor bar geometries are modified under the constrained of using the same cross sectional area and conductive material in the rotor bars. Motor analyses are performed by using the analytical and the numerical method for different type of the rotor bar slots. So the rotor bar geometry, which has the same manufacturing cost and better operating conditions compare to the original one, are determined. Numerical results and their comparison are given for different rotor bar geometries in the paper.Also, rotor bar leakage inductance values are calculated analytically and their effects on the motor operation are discussed.

🔖

Bu Makaleye Atıf Yap

Ergene, L., Şal, S., İmeryüz, M. (2012). Kafesli Asenkron Motorlarda Maliyet Kısıtı Altında Rotor Çubuklarının Analizi / The Analysis of The Squirrel Cage Induction Motor Rotor Bars under the Cost Constraint. EMO Bilimsel Dergi, Cilt: 2 Sayı: 3, 23–28. https://ajindex.com/articles/1390446

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (18)

  1. Alger P. L., and Wray J. H., “Double and Triple Squirrel Cages for Polyphase Induction Motors”, AIEE Transactions, pp. 637-644, 1953.
  2. Alger P. L., “Induction Machines: Their Behavior and Uses,” Gordon and Breach Publishers, USA, 1970
  3. Fitzgerald A. E., Kingsley Jr. C., Umans S. D., “Electric Machinery,” McGraw-Hill, Boston, 2003
  4. Sadarangani C., “Electrical Machines – Design and Analysis of Induction and Permanent Magnet Motors,” Royal Institute of Technology, Stockholm, Sweden, 2000
  5. J.L. Kirtley Jr., “Designing Squirrel Cage Rotor Slots with High Conductivity”, International Conference on Electric Machines, Krakow, Poland, 5-8 September, 2004
  6. Galindo V.A., Lopez-Fdez X. M., Pinto J.A.D., Coimbra A.P., “Parametric Study of Rotor Slot Shape On a Cage Induction Motor”, X International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF, 2001, pp. 441 – 447.
  7. Chapman,S.J.,'ElectricMachineryFundamentals', McGraw-Hill Science/Engineering/Math; 4th edition, 2003.
  8. Boldea I., Nasar S. A.: The Induction Machine Handbook, CRC Pres, 2002
  9. Seinsch, H.O.: Program felder Drechfeldrechnung, Magnetkreisr. Fuer Kaefiglaeufer Fachbuch, 1993.
  10. Kalenderli, Ö.; Elektrik Mühendisliğinde Sonlu Elemanlar Yöntemi Ders Notları
  11. Schuisky W., Brechnung Electrischer Maschinen, Springer Verlag, 1960.
  12. Engelmann R.H., Middendorf W.H.: Handbook of Electric Motors, Marcel Dekker, 1995
  13. Pyrhönen J., Jokinen T.: Design of Rotating Electrical Machines, John Wiley & Sons,2008
  14. Rentzsch, H.: Elektromotoren, ABB Fachbuch, 1992
  15. Chapman,S.J.,'ElectricMachineryFundamentals', McGraw-Hill Science/Engineering/Math; 4th edition, 2003.
  16. Boldea I., Nasar S. A.: The Induction Machine Handbook, CRC Pres, 2002
  17. Seinsch, H.O.: Program felder Drechfeldrechnung, Magnetkreisr. Fuer Kaefiglaeufer Fachbuch, 1993.
  18. Rentzsch, H.: Elektromotoren, ABB Fachbuch, 1992