Dergiler / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2024 / Cilt: 24 Sayı: 1

Atık Malzeme Olarak Uçucu Kül ve Andezit Tozu İçeren PVA Lif Donatılı Çimento Esaslı Kompozitlerin Basınç Dayanımının Tahmininde Yanıt Yüzey Metodolojisinin Kullanılması

Utilization of Response Surface Methodology for Predicting the Compressive Strength of PVA Fiber-Reinforced Cementitious Composites Containing Fly Ash and Andesite Powder as Waste Materials

Şükrü Özkan(ISPARTA UYGULAMALI BİLİMLER ÜNİVERSİTESİ)0000-0002-7223-9673
Hakan Ceylan(ISPARTA UYGULAMALI BİLİMLER ÜNİVERSİTESİ)0000-0001-8099-9819
Sayfa
103–116
Yayın Tarihi
2024-02-27
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

YYM ile yapılan basınç dayanımı tahmininden elde edilen veriler ile laboratuvar koşullarında elde edilen deneysel veriler kıyaslandığında aralarındaki uyumun %95’lik bir belirleme katsayısı ile iyi derecede olduğu tespit edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada çimento esaslı kompozit üretiminde kullanılan atık andezit tozu (AAT) ikamesinin kompozit malzemenin dayanım değerlerine etkisi araştırılmış ve edilen veriler yanıt yüzey yöntemi (YYM) metoduyla modellenerek deneysel veriler ile uyumu incelenmiştir.
📊
Temel Bulgular & Veri:Çimento esaslı karışımların üretilmesinde AAT, çimento ile ağırlıkça %5, %10, %15, %20, %25 ve %30 olmak üzere 6 farklı oranda ikame edilmiştir.
💡
Sonuç & Katkı:YYM ile yapılan basınç dayanımı tahmininden elde edilen veriler ile laboratuvar koşullarında elde edilen deneysel veriler kıyaslandığında aralarındaki uyumun %95’lik bir belirleme katsayısı ile iyi derecede olduğu tespit edilmiştir.
🔬Tür:Laboratuvar & Saha Deneyi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Andezit · Atık · Basınç dayanımı

Özet

Bu çalışmada çimento esaslı kompozit üretiminde kullanılan atık andezit tozu (AAT) ikamesinin kompozit malzemenin dayanım değerlerine etkisi araştırılmış ve edilen veriler yanıt yüzey yöntemi (YYM) metoduyla modellenerek deneysel veriler ile uyumu incelenmiştir. Çimento esaslı karışımların üretilmesinde AAT, çimento ile ağırlıkça %5, %10, %15, %20, %25 ve %30 olmak üzere 6 farklı oranda ikame edilmiştir. Ayrıca basınç dayanımı üzerine kür süresinin etkisi 90 gün sonunda incelenmiştir. Çimento ve AAT ikame oranları YYM için ana girdi verilerini oluştururken 90 günlük basınç dayanımı değerleri yanıt verilerini oluşturmuştur. YYM ile yapılan basınç dayanımı tahmininden elde edilen veriler ile laboratuvar koşullarında elde edilen deneysel veriler kıyaslandığında aralarındaki uyumun %95’lik bir belirleme katsayısı ile iyi derecede olduğu tespit edilmiştir. Ayrıca karışımlarda kullanılan %5 ikame oranı, diğer ikame oranları arasında daha yüksek dayanım değerleri elde edilmesini sağlamıştır.

Abstract

In this study, the effect of waste andesite dust (WAD) substitution used in cementitious composite production on the strength values of composite material was investigated and the data were modeled by surface response methodology (RSM) and their compatibility with experimental data was analyzed. In the production of cementitious mixtures, WAD was substituted with cement at six different ratios as 5%, 10%, 15%, 20%, 25% and 30% by weight. In addition, the effect of curing times on compressive strength was investigated at the age of 90-days. While the cement and WAD replacement rates constituted the main input data for the RSM, the 90-days compressive strength values constituted the output data. When the data obtained from the compressive strength estimation conducted by RSM and the experimental data obtained under laboratory conditions were compared, it was determined that the compatibility between them was good with a 95% coefficient of determination. In addition, the 5% substitution rate used in the mixtures provided higher strength values among other substitution rates.

🔖

Bu Makaleye Atıf Yap

Özkan, Ş., Ceylan, H. (2024). Atık Malzeme Olarak Uçucu Kül ve Andezit Tozu İçeren PVA Lif Donatılı Çimento Esaslı Kompozitlerin Basınç Dayanımının Tahmininde Yanıt Yüzey Metodolojisinin Kullanılması. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 24 Sayı: 1, 103–116. https://doi.org/10.35414/akufemubid.1325417

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (53)

  1. Abdulkadir, I., Mohammed, B. S., Liew, M. S., Wahab, M. M. A., 2021. Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310, 125259. https://doi.org/10.1016/j.conbuildmat.2021.125259
  2. Adamu, M., Trabanpruek, P., Jongvivatsakul, P., Likitlersuang, S., Iwanami, M., 2021. Mechanical performance and optimization of high-volume fly ash concrete containing plastic wastes and graphene nanoplatelets using response surface methodology. Construction and Building Materials, 308, 125085. https://doi.org/10.1016/j.conbuildmat.2021.125085
  3. Adesina, A., Das, S., 2021. Sustainable utilization of recycled asphalt as aggregates in engineered cementitious composites. Construction and Building Materials, 283, 122727. https://doi.org/10.1016/j.conbuildmat.2021.122727
  4. Alyamac, K. E., Ghafari, E., Ince, R., 2017. Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method. Journal of Cleaner Production, 144, 192–202. https://doi.org/10.1016/j.jclepro.2016.12.156
  5. Alyousef, R., Ahmad, W., Ahmad, A., Aslam, F., Joyklad, P., Alabduljabbar, H., 2021. Potential use of recycled plastic and rubber aggregate in cementitious materials for sustainable construction: A review. Journal of Cleaner Production, 329, 129736. https://doi.org/10.1016/j.jclepro.2021.129736
  6. Amani, A., Ramezanianpour, A. M., Palassi, M., 2021. Investigation on the sustainable use of electric arc furnace slag aggregates in eco-friendly alkali-activated low fineness slag concrete as a green construction composite. Journal of Cleaner Production, 307, 127257. https://doi.org/10.1016/j.jclepro.2021.127257
  7. Ariöz, Ö., Yildirim, K., 2012. Türkiye’de çimento sektöründeki belirsizlikler ve Türk çimento sektörünün SWOT analizi. Dumlupınar Üniversitesi Sosyal Bilimler Dergisi, 32, 173-190.
  8. ASTM C109 / C109M-20b, 2020. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens). West Conshohocken, Philadelphia, 1-12. https://doi.org/0.1520/C0109_C0109M-21
  9. ASTM C618-19, 2019. Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use. Annual Book of ASTM Standards. West Conshohocken, Philadelphia, 1-5. https://doi.org/10.1520/C0618-19
  10. Ávalos-Rendón, T. L., Chelala, E. A. P., Mendoza Escobedo, C. J., Figueroa, I. A., Lara, V. H., Palacios-Romero, L. M., 2018. Synthesis of belite cements at low temperature from silica fume and natural commercial zeolite. Materials Science and Engineering: B, 229, 79–85. https://doi.org/10.1016/j.mseb.2017.12.020
  11. BS EN 933-1:2012., 2012. Tests for geometrical properties of aggregates - Determination of particle size distribution. Sieving method. United States, 1-22. https://doi.org/10.3403/30241873
  12. Çelikten, S, Canbaz, M., 2021. Atik Andezit Ve Mermer Tozunun Çimento Harçlarinin Dayanim Özelliklerine Etkisi. dergipark.org.tr, 29, 43–48. https://doi.org/10.31796/ogummf.709810
  13. Çelikten, S., 2021. Mechanical and microstructural properties of waste andesite dust-based geopolymer mortars. Advanced Powder Technology, 32, 1–9. https://doi.org/10.1016/j.apt.2020.10.011
  14. Danish, A., Mosaberpanah, M. A., Salim, M. U., Fediuk, R., Rashid, M. F., Waqas, R. M., 2021. Reusing marble and granite dust as cement replacement in cementitious composites: A review on sustainability benefits and critical challenges. Journal of Building Engineering, 44, 102600. https://doi.org/10.1016/j.jobe.2021.102600
  15. Davraz, M., Ceylan, H., Topçu, İ. B., Uygunoğlu, T., 2018. Pozzolanic effect of andesite waste powder on mechanical properties of high strength concrete. Construction and Building Materials, 165, 494–503. https://doi.org/10.1016/j.conbuildmat.2018.01.043
  16. Deng, Y., Yan, C., Zhang, J., Yin, L., Liu, S., Yan, Y., 2022. Preparation and mechanical characterization of engineered cementitious composites with high-volume fly ash and waste glass powder. Journal of Cleaner Production, 333, 130222. https://doi.org/10.1016/j.jclepro.2021.130222
  17. Gao, D., Lv, M., Pang, Y., Tang, J., Zhang, Y., 2022. Property analysis and mixture design of high ductility cementitious composites with totally recycled fine aggregate based on target strength and strain capacity. Journal of Cleaner Production, 130492. https://doi.org/10.1016/j.jclepro.2022.130492
  18. Ghafourian, K., Kabirifar, K., Mahdiyar, A., Yazdani, M., Ismail, S., Tam, V. W. Y., 2021. A synthesis of express analytic hierarchy process (EAHP) and partial least squares-structural equations modeling (PLS-SEM) for sustainable construction and demolition waste management assessment: The case of Malaysia. Recycling, 6(4), 73. https://doi.org/10.3390/recycling6040073
  19. Ghavami, S., Naseri, H., Jahanbakhsh, H., Moghadas Nejad, F., 2021. The impacts of nano-SiO2 and silica fume on cement kiln dust treated soil as a sustainable cement-free stabilizer. Construction and Building Materials, 285, 122918. https://doi.org/10.1016/j.conbuildmat.2021.12298
  20. Hamidi, M., Kacimi, L., Cyr, M., Clastres, P., 2013. Evaluation and improvement of pozzolanic activity of andesite for its use in eco-efficient cement. Construction and Building Materials, 47, 1268–1277. https://doi.org/10.1016/j.conbuildmat.2013.06.013
  21. Kaliyavaradhan, S. K., Li, L., Ling, T. C., 2022. Response surface methodology for the optimization of CO2 uptake using waste concrete powder. Construction and Building Materials, 340, 127758. https://doi.org/10.1016/j.conbuildmat.2022.127758
  22. Kawabata, Y., Dunant, C., Yamada, K., Scrivener, K., 2019. Impact of temperature on expansive behavior of concrete with a highly reactive andesite due to the alkali–silica reaction. Cement and Concrete Research, 125, 105888. https://doi.org/10.1016/j.cemconres.2019.105888
  23. Kocak, Y., Nas, S., 2014. The effect of using fly ash on the strength and hydration characteristics of blended cements. Construction and Building Materials, 73, 25–32. https://doi.org/10.1016/j.conbuildmat.2014.09.048
  24. Labbaci, Y., Labbaci, B., Abdelaziz, Y., Mekkaoui, A., Alouani, A., 2017. The use of the volcanic powders as supplementary cementitious materials for environmental-friendly durable concrete. Construction and Building Materials, 133, 468–481. https://doi.org/10.1016/j.conbuildmat.2016.12.088
  25. Li, V., 2002. Interface Tailoring for Strain-hardening PVA-ECC. ACI Materials Journal, 99, 463-472. https://doi.org/10.14359/12325
  26. Lye, H., Bashar, M.S., Liew, M., Wahab, M.M.A., 2020. Bond behaviour of CFRP-strengthened ECC using Response Surface Methodology (RSM). Case Studies in Construction materials, 12, e00327. https://doi.org/10.1016/j.cscm.2019.e00327
  27. Mindess, S., Young, J.F., Darwin, D. 2003. Concrete. Hoboken: Prentice Hall. 2nd ed., 1-644.
  28. Mirmozaffari, M., Yazdani, M., Boskabadi, A., Dolatsara, H. A., Kabirifar, K., Golilarz, 2020. A novel machine learning approach combined with optimization models for eco-efficiency evaluation. Applied Sciences (Switzerland), 10(5), 1-31. https://doi.org/10.3390/app10155210
  29. Mohammed, B. S., Azmi, N. J., Abdullahi, M., 2011. Evaluation of rubbercrete based on ultrasonic pulse velocity and rebound hammer tests. Construction and Building Materials, 25, 1388–1397. https://doi.org/10.1016/j.conbuildmat.2010.09.004
  30. Mohammed, B. S., Khed, V. C., Nuruddin, M. F., 2018. Rubbercrete mixture optimization using response surface methodology. Journal of Cleaner Production, 171, 1605–1621. https://doi.org/10.1016/j.jclepro.2017.10.102
  31. Myers, R. H., Montgomery, D. C. and Anderson-Cook, M., 2016. Response surface methodology process and product optimization using designed experiments. John Wiley & Sons, Ltd, New York, 1-856.
  32. Özkan, Ş., Ceylan, H., 2022. The effects on mechanical properties of sustainable use of waste andesite dust as a partial substitution of cement in cementitious composites. Journal of Building Engineering, 58, 104959. https://doi.org/10.1016/j.jobe.2022.104959
  33. Pacheco-Torgal, F., Abdollahnejad, Z., Camões, A. F., Jamshidi, M., Ding, Y., 2012. Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue? Construction and Building Materials, 30, 400–405. https://doi.org/10.1016/j.conbuildmat.2011.12.017
  34. Prošek, Z., Nežerka, V., Tesárek, P., 2020. Enhancing cementitious pastes with waste marble sludge. Construction and Building Materials, 255, 119372. https://doi.org/10.1016/j.conbuildmat.2020.119372
  35. Quedou, P. G., Wirquin, E., Bokhoree, C., 2021. Sustainable concrete: Potency of sugarcane bagasse ash as a cementitious material in the construction industry. Case Studies in Construction Materials, 14, e00545. https://doi.org/10.1016/j.cscm.2021.e00545
  36. Ray, S., Haque, M., Ahmed, T., Nahin, T. T., 2023. Comparison of artificial neural network (ANN) and response surface methodology (RSM) in predicting the compressive and splitting tensile strength of concrete prepared with glass waste and tin (Sn) can fiber. Journal of King Saud University - Engineering Sciences, 35(3), 185-199. https://doi.org/10.1016/j.jksues.2021.03.006
  37. Samimi, K., Kamali-Bernard, S., Akbar Maghsoudi, A., Maghsoudi, M., Siad, H., 2017. Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes. Construction and Building Materials, 151, 292–311. https://doi.org/10.1016/j.conbuildmat.2017.06.071
  38. Shahmansouri, A. A., Yazdani, M., Hosseini, M., Akbarzadeh Bengar, H., Farrokh Ghatte, H., 2022. The prediction analysis of compressive strength and electrical resistivity of environmentally friendly concrete incorporating natural zeolite using artificial neural network. Construction and Building Materials, 317, 125876. https://doi.org/10.1016/j.conbuildmat.2021.125876
  39. Shannag, M. J., Yeginobali, A., 1995. Properties of pastes, mortars and concretes containing natural pozzolan. Cement and Concrete Research, 25, 647–657. https://doi.org/10.1016/0008-8846(95)00053-F
  40. Signorini, C., Nobili, A., 2022. Durability of fibre-reinforced cementitious composites (FRCC) including recycled synthetic fibres and rubber aggregates. Applications in Engineering Science, 9, 100077. https://doi.org/10.1016/j.apples.2021.100077
  41. Sogancioglu, M., Yel, E., Yilmaz-Keskin, U. S., 2013. Utilization of andesite processing wastewater treatment sludge as admixture in concrete mix. Construction and Building Materials, 46, 150–155. https://doi.org/10.1016/j.conbuildmat.2013.04.035
  42. Thapa, V., Waldmann, D., 2021. Binary blended cement pastes and concrete using gravel wash mud (GWM) powders. Construction and Building Materials, 302, 124225. https://doi.org/10.1016/j.conbuildmat.2021.124225
  43. TS EN 197-1, 2012. Çimento - Bölüm 1: Genel çimentolar - Bileşim, özellikler ve uygunluk kriterleri. Ankara, 1-40.
  44. Valente, M., Sambucci, M., Chougan, M., Ghaffar, S. H., 2022. Reducing the emission of climate-altering substances in cementitious materials: A comparison between alkali-activated materials and Portland cement-based composites incorporating recycled tire rubber. Journal of Cleaner Production, 333, 130013. https://doi.org/10.1016/j.jclepro.2021.130013
  45. Yang, K. H., Song, J. K., Song, K. Il, 2013. Assessment of CO2 reduction of alkali-activated concrete. Journal of Cleaner Production, 39, 265–272. https://doi.org/10.1016/j.jclepro.2012.08.001
  46. Yaro, N. S. A., Napiah, M. Bin, Sutanto, M. H., Usman, A., Saeed, S. M., 2021. Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. Construction and Building Materials, 298, 123849. https://doi.org/10.1016/j.conbuildmat.2021.123849
  47. Yaro, N. S. A., Sutanto, M. H., Habib, N. Z., Napiah, M., Usman, A., Muhammad, A., 2022. Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures. Construction and Building Materials, 324, 126618. https://doi.org/10.1016/j.conbuildmat.2022.126618
  48. Yazdani, M., Kabirifar, K., Fathollahi-Fard, A. M., Mojtahedi, M., 2021a. Production scheduling of off-site prefabricated construction components considering sequence dependent due dates. Environmental Science and Pollution Research, 1-17. https://doi.org/10.1007/s11356-021-16285-0
  49. Yazdani, M., Kabirifar, K., Frimpong, B. E., Shariati, M., Mirmozaffari, M., Boskabadi, A., 2021b. Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia. Journal of Cleaner Production, 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138
  50. Zeyad, A. M., Khan, A. H., Tayeh, B. A., 2020. Durability and strength characteristics of high-strength concrete incorporated with volcanic pumice powder and polypropylene fibers. Journal of Materials Research and Technology, 9, 806–818. https://doi.org/10.1016/j.jmrt.2019.11.021
  51. Zhang, Z., Yang, F., Liu, J. C., Wang, S., 2020. Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash. Cement and Concrete Research, 137, 106200. https://doi.org/10.1016/j.cemconres.2020.106200
  52. Zhou, Y., Xie, L., Kong, D., Peng, D., Zheng, T., 2022. Research on optimizing performance of desulfurization-gypsum-based composite cementitious materials based on response surface method. Construction and Building Materials, 341, 127874. https://doi.org/10.1016/j.conbuildmat.2022.127874
  53. Verimadenciliği, http://www.stat.gen.tr/index.php?istek=sinif&dersid=ist01&konuid=ver01&max=1, (06.07.2023)