Dergiler / Sinop Üniversitesi Fen Bilimleri Dergisi / 2026 / Cilt: 11 Sayı: 1

Geçiş Katının Köşe Kolon ve Perde Çıkarımları Altında Betonarme Yapıların Aşamalı Göçme Mekanizmalarındaki Rolü

Role of Transfer Floor in Progressive Collapse Mechanisms of Reinforced Concrete Buildings under Corner Column and Shear Wall Removals

Sayfa
201–218
Yayın Tarihi
2026-06-26
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Geçiş katı altında baskın çekme rijitliği mekanizması açık bir şekilde görülürken, üstünde ise baskın basınç kemerlenmesi mekanizması çekme rijitliği mekanizması ile birlikte yeniden yük dağılımı ve dağılıma destek çıkacak eleman karakteristiklerine uygun olarak gözlemlenmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Geçiş katlı yapıların yüksek hasar görebilirlikleri ve yapısal karmaşıklıkları, aşamalı göçme halinde ciddi hasarlara sebebiyet vermektedir.
📊
Temel Bulgular & Veri:Her eleman çıkarımından sonra, kirişlerin eksenel yük yeniden dağılımları, düşey taşıyıcı elemanların talep-kapasite oranları, etkileşim diyagramları incelenmiştir.
💡
Sonuç & Katkı:Geçiş katı altında baskın çekme rijitliği mekanizması açık bir şekilde görülürken, üstünde ise baskın basınç kemerlenmesi mekanizması çekme rijitliği mekanizması ile birlikte yeniden yük dağılımı ve dağılıma destek çıkacak eleman karakteristiklerine uygun olarak gözlemlenmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Aşamalı göçme · geçiş katı · basınç kemerlenmesi etkisi

Özet

Geçiş katlı yapıların yüksek hasar görebilirlikleri ve yapısal karmaşıklıkları, aşamalı göçme halinde ciddi hasarlara sebebiyet vermektedir. Bu çalışma, bu tür yapılarda, aşamalı göçme mekanizmasının doğasını ve elemanlar arası yeniden yük dağılımı hakkında yeni görüşler içermektedir. Tasarlanmış geçiş katlı betonarme sistem, köşe kolonları çıkarılmaları altında, sonlu elemanlar analizi kapsamında analiz edilmiştir. Her eleman çıkarımından sonra, kirişlerin eksenel yük yeniden dağılımları, düşey taşıyıcı elemanların talep-kapasite oranları, etkileşim diyagramları incelenmiştir. Geçiş katının altında ve üstünde olmak üzere, sistemde basınç kemerlenmesi ve çekme rijitliği mekanizmalarının dağılımı detaylı bir biçimde irdelenmiştir. Aşamalı göçme süresince, talep kapasite oranlarındaki artış özellikle ilk katlarda çok daha yüksek bulunmuştur. Geçiş katı altında baskın çekme rijitliği mekanizması açık bir şekilde görülürken, üstünde ise baskın basınç kemerlenmesi mekanizması çekme rijitliği mekanizması ile birlikte yeniden yük dağılımı ve dağılıma destek çıkacak eleman karakteristiklerine uygun olarak gözlemlenmiştir. Bulgular kapsamında, perde-çerçeve etkileşimi, dış desteklerin kısıtlayıcı etkisi ve geçiş katının şekil değiştirme esaslı özellikleri, yeniden yük dağılımını belirleyen ve aşamalı göçme mekanizmalarını yöneten esas parametreler olduğu bulunmuştur.

Abstract

The structural complexity and higher vulnerability of the buildings with transfer floors may cause serious damages under progressive collapse. This study provides new insights into the load redistribution between elements and the nature of progressive collapse mechanisms in these types of buildings. The designed reinforced concrete structural system with transfer floor is analyzed within finite element method under corner column removal sequence. The axial force redistributions of beams, demand-capacity ratios (DCR), interaction diagrams of vertical bearing elements are examined after each removal. The distributions of arching and catenary mechanisms are discussed in a detailed way for the portions of system above and below transfer structure. During progressive collapse, the increase in DCRs is particularly higher in the first floors, while the dominant catenary action can be clearly seen below the transfer floor, the dominant arching mechanism is monitored together with tensile catenary according to the load redistribution and redundancy characteristics of the system. In the context of the findings, the wall-frame interaction, the restraining effect of outriggers and the deformational characteristics of transfer plate are found to be the main parameters which configure load redistribution and govern the progressive collapse mechanisms.

🔖

Bu Makaleye Atıf Yap

Selman, E. (2026). Geçiş Katının Köşe Kolon ve Perde Çıkarımları Altında Betonarme Yapıların Aşamalı Göçme Mekanizmalarındaki Rolü. Sinop Üniversitesi Fen Bilimleri Dergisi, Cilt: 11 Sayı: 1, 201–218. https://doi.org/10.33484/sinopfbd.1773011

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (34)

  1. Yacoubian, M., Lam, N., Lumantarna, E., & Wilson, J.L. (2018). A simplified design approach for modelling shear force demand on tower walls supported on a transfer structure in regions of lower seismicity. Earthquakes and Structures, 15(1), 97-111. https://doi.org/10.12989/eas.2018.15.1.097
  2. Su, R.K.L., & Cheng, M.H. (2009). Earthquake induced shear concentration in shear walls above transfer structures. The Structural Design of Tall and Special Buildings, 18(6), 657-671. https://doi.org/10.1002/tal.458
  3. Tang, T.O., & Su, R.K.L. (2015). Gravity induced shear force in reinforced concrete walls above transfer structures. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 168(1), 40-55. https://doi.org/10.1680/stbu.13.00092
  4. Lu, D.G., Cui, S.S., Song, P.Y., & Chen, Z.H. (2012). Robustness assessment for progressive collapse of framed structures using pushdown analysis methods. International Journal of Reliability and Safety, 6, 15-37. https://doi.org/10.1504/IJRS.2012.044293
  5. Abdelbasset, M.Y., Sayed-Ahmed, E.Y., & Mourad, S.A. (2016). Seismic analysis of high-rise buildings with transfer slabs: state-of-the-art-review. Electronic Journal of Structural Engineering, 16(1), 38-51. https://doi.org/10.56748/ejse.16209
  6. El-Awady, A.K., Okail, H.O., Abdelrahman, A.A., & Sayed-Ahmed, E.Y. (2014). Seismic behavior of high-rise buildings with transfer floor. Electronic Journal of Structural Engineering, 14, 57-70. https://doi.org/10.56748/ejse.14181
  7. Zhou, Y., Chen, P., Wang, C., Zhang, L., & Lu, L. (2018). Seismic performance evaluation of tall multitower reinforced concrete buildings with large bottom podiums. Structural Concrete, 19(6), 1591–1607. https://doi.org/10.1002/suco.201700142
  8. Selman, M.E. (2024). Progressive collapse performances of outrigger-braced reinforced concrete buildings with transfer floor. Sadhana Journal, 49,162. https://doi.org/10.1007/s12046-024-02517-9
  9. Zhang, J., Liu, Y., & Zheng, W. (2024). Experimental and numerical study on a high-rise building with transfer slab. Journal of Building Engineering, 82, 108192. https://doi.org/10.1016/j.jobe.2023.108192
  10. Yacoubian, M., Lam, N., Lumantarna, E., & Wilson, J.L. (2017). Effects of podium interference on shear force distributions in tower walls supporting tall buildings. Engineering Structures, 148, 639-659. https://doi.org/10.1016/j.engstruct.2017.06.075
  11. Shan, L. (2017). Progressive collapse simulation of multi-story reinforced concrete buildings. (Thesis no. 10633677) [PhD Thesis, University of California].
  12. Abdelwahed, B. (2019). A review on building progressive collapse, survey and discussion. Case Studies in Construction Materials, 11, e00264. https://doi.org/10.1016/j.cscm.2019.e00264
  13. Qian, K., Li, B., & Ma, J.X. (2015). Load-carrying mechanism to resist progressive collapse of RC buildings. Journal of Structural Engineering, 141(2): 04014107. https://doi.org/10.1061/(ASCE)st.1943-541x.0001046
  14. Cheng, Y., Liu, J., Sun, L., Xiao, Z., & Ou, C. (2023). Dynamic performance of multi-column removal framed structures subjected to impact and heaped loads. Structural Engineering International, 1, 1-13. https://doi.org/10.1080/10168664.2023.2271500
  15. Kiakojouri, F., Zeinali, E., Adam, J.M., & De Biagi, V. (2023). Experimental studies on the progressive collapse of building structures: A review and discussion on dynamic column removal techniques. Structures, 57, 105059. https://doi.org/10.1016/j.istruc.2023.105059
  16. Lu, X., Chen, Y., & Mao, Y. (2012). Shaking table model test and numerical analysis of a supertall building with high level transfer storey. The Structural Design of Tall and Special Buildings, 21, 699-723. https://doi.org/10.1002/tal.632
  17. Kim, J., & Jung, M. (2013). Progressive collapse resisting capacity of modular mega frame buildings. The Structural Design of Tall and Special Buildings, 22, 471-484. https://doi.org/10.1002/tal.697
  18. Tian, Y., Lin, K., Zhang, L., Lu, X., & Xue, H. (2021). Novel seismic–progressive collapse resilient super-tall building system. Journal of Building Engineering, 41, 102790. https://doi.org/10.1016/j.jobe.2021.102790
  19. Ravichandra, G., & Chandan, T.N. (2022). Progressive collapse of irregular RC building. Materials Today: Proceedings, 62, 6768-6775. https://doi.org/10.1016/j.matpr.2022.04.904
  20. Vinay, M., Rao, P.K.R., Dey, S., Swaroop, A.H.L., Sreenivasulu, A., & Rao, K.V. (2022). Evaluation of progressive collapse behavior in reinforced concrete buildings. Structures, 45, 1902-1919. https://doi.org/ 10.1016/j.istruc.2022.10.001
  21. Miao, Z., Liu, Y., Geng, X., & Lu, Y. (2022). Evaluation of seismic collapse resistance of reinforced concrete frames designed with nonlinear viscous dampers. Structures, 40, 960-976. https://doi.org/10.1016/j.istruc.2022.04.056
  22. Bao, Y., & Tan, K.H. (2024). Analytical model of compressive arch action for one-way RC beams and two-way framed substructures under column removal scenarios. Engineering Structures, 304, 117694. https://doi.org/10.1016/j.engstruct.2024.117694
  23. Ferraioli, M., Laurenza, B., Lavino, A., & De Matteis, G. (2024). Progressive collapse analysis and retrofit of a steel-RC building considering catenary effect. Journal of Constructional Steel Research, 213, 108364. https://doi.org/10.1016/j.jcsr.2023.108364
  24. Wang, S., Peng, J., & Kang, S. (2019). Evaluation of compressive arch action of RC beams and development of design method. Engineering Structures, 191, 479-492. https://doi.org/10.1016/j.engstruct.2019.04.083
  25. Tan, Z., Zhong, W.H., Tian, L.M., Zheng, Y.H., Meng, B., Duan, S.C., & Jiang, C. (2022). Effects of the numbers of stories and spans on the collapse-resistance performance of multi-story steel frame structures with reduced beam section connections. Advanced Steel Construction, 18(2), 617-629. https://doi.org/10.18057/IJASC.2022.18.2.10
  26. Cheng, J.F., Gu. Q., Qian. K., Fu, F., & Deng, X.F. (2024). Dynamic behavior of RC frames against progressive collapse subjected to loss of a corner column scenario. Journal of Building Engineering, 86, 108872. https://doi.org/10.1016/j.jobe.2024.108872
  27. Shan, L., Petrone, F., & Kunnath, S. (2019). Robustness of RC buildings to progressive collapse: Influence of building height. Engineering Structures, 183, 690-701. https://doi.org/10.1016/j.engstruct.2019.01.052
  28. TS-500 (2000). Turkish Standards Institution. Requirements for Design and Construction of Reinforced Concrete Structures TS-500(2000), Ankara, Türkiye.
  29. ACI-318 (2019). ACI 318-19 Building Code Requirements for Structural Concrete. American Concrete Institute, Washington, USA.
  30. TSC-2018 (2018). Turkish Seismic Code 2018, Turkish Disaster and Emergency Management, Ankara, Türkiye.
  31. Kang, S. M., Na, S. J., & Hwang, H. J. (2021). Punching shear strength of reinforced concrete transfer slab-column connections with shear reinforcement. Engineering Structures, 243, 112610. https://doi.org/10.1016/j.engstruct.2021.112610
  32. ETABS Computer and Structures Inc. (2022). Integrated Software for Structural Analysis and Design, Berkeley, California.
  33. General Service Administration (GSA) (2016). Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, Washington, USA.
  34. XTRACT Imbsen and Associates. (2007). XTRACT 3.0 - Cross Section Analysis Software for Structural and Earthquake Engineering, California, USA