Dergiler / Türkiye Ormancılık Dergisi / 2025 / Cilt: 26 Sayı: 4

PVC esaslı bazı OPK profillerin eğilme davranışının deneysel ve sonlu elemanlar analizi

Experimental and finite element analysis of some WPC profiles in bending

Ergün Güntekin(BURSA TEKNİK ÜNİVERSİTESİ)0000-0002-8423-6664
Sayfa
602–609
Yayın Tarihi
2025-12-29
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Çalışmanın sonuçları, sayısal modellerin OPK profillerinin eğilme davranışının gerçekçi bir şekilde tahmin edilmesinde kullanılabileceğini göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Ticari olarak üretilen polivinil klorür (PVC) esaslı bazı odun plastik kompozit (OPK) profillerin eğilme özellikleri deneysel ve sayısal yöntemler kullanılarak analiz edilmiştir.
📊
Temel Bulgular & Veri:İlk olarak, PVC-odun unu kompozitlerinin elastikiyet modülü ASTM D790 standardına göre 3 nokta eğilme testleri kullanılarak küçük numuneler üzerinde belirlenmiştir.
💡
Sonuç & Katkı:Çalışmanın sonuçları, sayısal modellerin OPK profillerinin eğilme davranışının gerçekçi bir şekilde tahmin edilmesinde kullanılabileceğini göstermektedir.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Eğilme özellikleri · OPK profil · Sonlu elemanlar analizi

Özet

Ticari olarak üretilen polivinil klorür (PVC) esaslı bazı odun plastik kompozit (OPK) profillerin eğilme özellikleri deneysel ve sayısal yöntemler kullanılarak analiz edilmiştir. İlk olarak, PVC-odun unu kompozitlerinin elastikiyet modülü ASTM D790 standardına göre 3 nokta eğilme testleri kullanılarak küçük numuneler üzerinde belirlenmiştir. Üç farklı OPK profili deneysel olarak test edilmiş ve sonlu elemanlar yöntemi kullanılarak modellenmiştir. Sayısal modellemede izotropik malzeme özellikleri kullanılmıştır. Çalışmanın sonuçları, sayısal modellerin OPK profillerinin eğilme davranışının gerçekçi bir şekilde tahmin edilmesinde kullanılabileceğini göstermektedir. OPK profillerinin eğilme rijitlikleri benzer, ancak direnç özellikleri önemli ölçüde farklı bulunmuştur. Çalışma sonuçları OPK profillerin izotropik malzeme özellikleri kullanılarak modellenebileceğini göstermiştir.

Abstract

The bending properties of some commercially manufactured WPC profiles were analyzed using both experimental and numerical methods. First, the MOE of PVC-wood flour composites was determined on small samples using 3-point bending tests according to the ASTM D790 standard. Three WPC profiles were experimentally tested and modelled using the finite element method. Isotropic material properties were used in numerical modelling. The study results demonstrate that numerical models can accurately predict the bending behavior of WPC profiles until failure. The bending stiffness of the WPC profiles was similar however the strength properties were significantly different. The results of the study indicate that WPC profiles can be modelled using isotropic material properties.

🔖

Bu Makaleye Atıf Yap

Güntekin, E. (2025). PVC esaslı bazı OPK profillerin eğilme davranışının deneysel ve sonlu elemanlar analizi. Türkiye Ormancılık Dergisi, Cilt: 26 Sayı: 4, 602–609. https://doi.org/10.18182/tjf.1714216

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (36)

  1. Alharbi, M., Kong, I. Patel, V.I., 2020. Simulation of uniaxial stress–strain response of 3D-printed polylactic acid by nonlinear finite element analysis. Applied Adhesion Science, 8(1): 5 https://doi.org/ 10.1186/s40563-020-00128-1
  2. Alves, L. M., Martins, P. A. F., 2009. Understanding invert forming of thin-walled polyvinyl chloride tubes using a die based on a mechanical flow formulation. Materials and Manufacturing Processes, 24 (12): 1398 -1404. doi: 10.1080/10426910902997530
  3. Ameen, M., 2001. Boundary Element Analysis: Theory and Programming. CRC Press: Boca Raton, FL, USA.
  4. Ashori, A., Matini Behzad, H., Tarmian, A., 2013. Effects of chemical preservative treatments on durability of wood flour/HDPE composites. Composites Part B: Engineering, 47: 308–313. https://doi.org/10.1016/j.compositesb.2012.11.022
  5. ASTM D790-17, 2017. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. ASTM International, West Conshohocken, PA, USA.
  6. Ayrilmis, N., Jarusombuti, S., Fueangvivat, V., Bauchongkol, P., 2011. Effect of thermal-treatment of wood fibres on properties of flat-pressed wood plastic composites. Polymer Degradation and Stability, 96: 818–822. https://doi.org/10.1016/j. polymdegradstab. 2011.02.005
  7. Bhandari, S., Lopez-Anido, R., 2018. Finite element analysis of thermoplastic polymer extrusion 3D printed material for mechanical property prediction. Additive Manufacturing, 22, 187–196. doi:10.1016/J.ADDMA.2018.05.009
  8. Başboğa, H.I., Güntekin, E., 2016. The optimization of wood trusses connected with metal plates using ANSYS. Pro Ligno, 12(4): 12-20.
  9. Bhaskar, K., Jayabalakrishnan, D., Vinoth Kumar, M., Sendilvelan, S., Prabhahar, M., 2021. Analysis on mechanical properties of wood plastic composite. Materials Today: Proceedings, 45(7): 5886-5891. https://doi.org/10.1016/j.matpr.2020.08.570.
  10. Caminero, M.A., Chacón, J.M., García-Moreno, I., Rodríguez, G.P., 2018. Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling. Composites Part B: Engineering, 148: 93–103. https://doi.org/10.1016/j.compositesb.2018.04.054
  11. Dickson, A.N., Barry, J.N., McDonnell, K.A., Dowling, D.P., 2017. Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing. Additive Manufacturing, 16, 146–152. https://doi.org/10.1016/j.addma. 2017.06.004.
  12. Diouf, P.M., Thiandoume, C., Abdulrahman, S.T., Ndour, O., Jibin, K.P., Maria, H.J., Thomas, S., Tidjani, A., 2022. Mechanical and rheological properties of recycled high-density polyethylene and ronier palm leaf fiber based biocomposites. Journal of Applied Polymer Science, 139(9), 51713. https://doi.org/10.1002/app.51713
  13. Duan, G., Chunxia, He., Min, W., Xingxing, Y., Wei, W., Yanping, W., 2023. Effect of silica on thermal and mechanical properties of eucalyptus-PVC wood-polymer composites. BioResources, 18(1):1803-1811. doi: 10.15376/biores.18.1.1803-1811
  14. Echeverria, C., Pahlevani, F., Gaikwad, V., Sahajwalla, V., 2017. The effect of microstructure, filler load and surface adhesion of marine bio-fillers, in the performance of hybrid wood-polypropylene particulate bio-composite. Journal of Cleaner Productions, 154:284–294. https://doi.org/10.1016/j.jclepro.2017.04.020
  15. Ezzaraa, I., Ayrilmis, N., Abouelmajd, M., Kuzman, M. K., Bahlaoui, A., Arroub, I., Bengourram, J., Lagache, M., Belhouideg, S., 2023. Numerical modeling based on finite element analysis of 3D-printed wood-polylactic acid composites: A Comparison with Experimental Data. Forests, 14(1): 95. https://doi.org/10.3390/f14010095
  16. Fei,G., Yuyu,L., Wenhui,H., Xiaolong,H., Rongxian,O., Qingwen, W., 2024. Experimental study and finite element analysis of wood-plastic composite hollow columns subjected to axial compression. Chinese Journal of Wood Science and Technology, 38(3): 40-48. doi:10.12326/j.2096-9694.2024044
  17. Feng, L., Wang, D., Yan, J., 2023. Reliability study of wood–plastic composites based on probabilistic finite elements. Polymers, 15: 312. https://doi.org/10.3390/polym15020312
  18. Güntekin, E., Uysal, M., 2024. Doğu kayını (Fagus orientalis L.) kontrplak ile güçlendirilmiş yongalevha ve liflevhanın eğilme davranışının deneysel ve nümerik analizi. Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, 7(1): 26-37. doi: 10.33725/mamad.1464366
  19. Haque, M.M.U., 2021. Property improvements of wood and wood-plastic composites. In: Wood Polymer Composites.(Ed: Mavinkere Rangappa, S., Parameswaranpillai, J., Kumar, M.H., Siengchin, S.) Composites Science and Technology, Springer, Singapore. https://doi.org/10.1007/978-981-16-1606-8_4
  20. Hosseini, S.B., Gaff, M., Smardzewski, J., 2024. Plastic deformation assessment of sawdust-rPET composites under bending load. Composites Part C: Open Access, 15: 100538: 1-14. https://doi.org/10.1016/j.jcomc.2024.100538
  21. Ilyas, R.A., Zuhri, M.Y.M., Aisyah, H.A., Asyraf, M.R.M., Hassan, S.A., Zainudin, E.S., Sapuan, S.M., Sharma, S., Bangar, S.P., Jumaidin, R., Nawab, Y., Faudzi, A. A. M., Abral, H., Asrofi, M., Syafri, E., Sari, N.H., 2022. Natural fiber-reinforced polylactic acid, polylactic acid blends and their composites for advanced applications. Polymers, 14(1): 202. https://doi.org/10.3390/polym14010202
  22. Jian, B., Mohrmann, S., Li, H., Li, Y., Ashraf, M., Zhou, J., Zheng, X., 2022. A Review on flexural properties of wood-plastic composites. Polymers, 14, 3942. https://doi.org/ 10.3390/polym14193942
  23. Li, J., Huo, R., Liu, W., Fang, H., Jiang, L., Zhou, D., 2022. Mechanical properties of PVC-based wood–plastic composites effected by temperature. Frontiers in Materials, 9: 1018902. doi: 10.3389/fmats.2022.1018902
  24. Mirowski, J., Oliwa, R., Oleksy, M., Tomaszewska, J., Ryszkowska, J., Budzik, G., 2021. Poly(vinyl chloride) composites with raspberry pomace filler. Polymers, 13(7): 1079. https://doi.org/10.3390/polym13071079
  25. Mirski, R., Dukarska, D., Walkiewicz, J., Derkowski, A., 2021. Waste wood particles from primary wood processing as a filler of insulation PUR foams. Materials, 14(17): 4781. https://doi.org/10.3390/ma14174781
  26. Mishra, S., Sain, M., 2007 Strength analysis of chair base from wood plastic composites by finite element method. Materials Research Innovations, 11(3): 137-143, doi:10.1179/ 143307507X225623
  27. Mo, X., Zhang, X., Fang, L., Zhang, Y., 2022. Research progress of wood-based panels made of thermoplastics as wood adhesives. Polymers, 14(1): 98. https://doi.org/10.3390/ polym14010098
  28. Moreno, D.D.P., de Camargo, R.V., dos Santos Luiz, D., Branco, L.T.P., Grillo, C.C., Saron, C., 2021. Composites of recycled polypropylene from cotton swab waste with pyrolyzed rice husk. Journal of Polymers and the Environment, 29: 350–362. https://doi.org/10.1007/s10924-020-01883-9
  29. Nukala, S.G., Kong, I., Kakarla, A.B., Patel, V.I., Abuel-Naga, H., 2023. Simulation of wood polymer composites with finite element analysis. Polymers, 15: 1977. https://doi.org/10.3390/ polym15091977
  30. Oksman, K., 2000. Mechanical properties of natural fibre mat reinforced thermoplastic. Applied Composite Materials, 7: 403–414. https://doi.org/10.1023/A:1026546426764
  31. Özdemir, F., Çota, A., Alma, H., 2018. Odun plastik kompozit malzemelerin termal ve ısı iletkenliği özelikleri üzerine sepiolit mineralinin etkisi. Turkish Journal of Forestry, 19(2): 205-209. doi:10.18182/tjf.415069
  32. Rahman, K.S., Islam, M.N., Rahman, M.M., Hannan, M.O., Dungani, R., Abdul Khalil, H.P.S., 2013. Flat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties. Springer Plus, 2: 629. https://doi.org/10.1186/2193-1801-2-629
  33. Roy, H., Pahlevani, F., Cholake, S., Echeverria, C., Banerjee, A., Sahajwalla, V., 2018. Simulation of marine bio-composite using empirical data combined with finite element technique. Journal of Composites Science, 2(3): 48. https://doi.org/10.3390/jcs2030048
  34. Sanvezzo, P.B., Branciforti, M.C., 2021. Recycling of industrial waste based on jute fiber-polypropylene: Manufacture of sustainable fiber-reinforced polymer composites and their characterization before and after accelerated aging. Industrial Crops and Products, 168: 113568 https://doi.org/10.1016/j.indcrop. 2021.113568
  35. Soury, E., Behravesh, A.H., Rouhani Esfahani, E., Zolfaghari, A., 2009. Design, optimization and manufacturing of wood–plastic composite pallet. Materials & Design, 30(10): 4183-4191. https://doi.org/10.1016/j.matdes.2009.04.035
  36. TS-EN 323, 1999. Ahşap esaslı levhalar-Birim hacim ağırlığının tayini. TSE, Ankara.