Dergiler / Politeknik Dergisi / 2019 / Cilt: 22 Sayı: 1

Isı Borulu Güneş Kollektörlerinde Nano Çözelti ile Performansın İyileştirilmesi

Heat Pipe Evacuated Tubular Solar Collector Performance Improvement by Applications Of Nanofluid

Umut Önder Su(GAZİ ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)0000-0003-2863-9132
Adnan Sözen(GAZİ ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)
Sayfa
245–257
Yayın Tarihi
2019-03-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

VTIBK’lerde nano çözelti kullanılması ile düşük ısıl direnç, yüksek ısıl iletkenlik, yüksek çalışma sıcaklıkları, kısa sürede istenen sıcaklık değerlerine ulaşılması ve verimin arttırılması hedeflenmektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Güneş enerjili sistemler, günümüzde çok farklı alanlarda, farklı amaçlar için yaygın olarak kullanılmaktadır.
📊
Temel Bulgular & Veri:DYGK’nin verimini etkileyen parametreler; kollektörlerde kullanılan akışkanın ısıl iletkenliği, ısı kayıpları ve optik kayıplardır.
💡
Sonuç & Katkı:VTIBK’lerde nano çözelti kullanılması ile düşük ısıl direnç, yüksek ısıl iletkenlik, yüksek çalışma sıcaklıkları, kısa sürede istenen sıcaklık değerlerine ulaşılması ve verimin arttırılması hedeflenmektedir.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Isı Borusu · Güneş Kollektörleri · Nano Çözelti

Özet

Güneş enerjili sistemler, günümüzde çok farklı alanlarda, farklı amaçlar için yaygın olarak kullanılmaktadır. Güneş enerjili sistemlerin en önemli elemanı güneş kollektörleridir. Güneş kollektörleri genel olarak düzlem yüzeyli (DYGK), vakum tüplü (VTGK), ısı borulu (IBGK) ve parabolik (PGK) olmak üzere dört tipe ayrılmakla beraber en yaygın olarak DYGK kullanılmaktadır. DYGK’nin verimini etkileyen parametreler; kollektörlerde kullanılan akışkanın ısıl iletkenliği, ısı kayıpları ve optik kayıplardır. DYGK’ların düşük verimlerinden dolayı son zamanlarda güneş enerjili sistemlerde VTGK ve IBGK’ların harmonizasyonu olan vakum tüplü ısı borulu güneş kollektörleri (VTIBGK) kullanılmaya başlanmıştır. VTIBGK’lar DYGK’lerin termik ve optik kayıplarını minimize etmekte ve verim artmaktadır. Bu çalışmada Güneş kollektörlerinde verimi etkileyen diğer bir parametre çalışma akışkanı olup literatürde örneğine pek rastlanmamış olunan amorf yapıdaki nano partiküller kullanılarak hazırlanmış nano akışkanların performansa etkisi irdelenmiştir. Son yıllarda yapılan çalışmalarda nanoakışkanları ısıl sistemlerde ve özellikle ısı borularında iyi sonuçlar verdiği ve verimlerini dikkate değer derecede arttırdığı görülmüştür. VTIBK’lerde nano çözelti kullanılması ile düşük ısıl direnç, yüksek ısıl iletkenlik, yüksek çalışma sıcaklıkları, kısa sürede istenen sıcaklık değerlerine ulaşılması ve verimin arttırılması hedeflenmektedir.

Abstract

There are many different type of solar energy systems, which are being used widely for different applications. The most important element of these solar systems is solar collector. There are four main types: Flat Panel (FPSC), Evacuated Tube, Heat Pipe and Parabolic. The most popular type is FP, which was invented in 1950s and this type is predominantly used for last three decades not only in residential but also industrial areas. This is because of two main factors: low initial investment and easy usage. Efficiency of FPSCs are mainly effected by 3 parameters: working fluid thermal conductivity, heat losses and optical losses. Due to low efficiency of FPSCs, Evacuated Tubular Heat Pipe Solar Collectors (ETSCs) are now being studied to replace FPSCs. In this type of solar collectors, optical and thermal losses are minimized and performance of the system is better. In this study, ETSCs which are tested by charging Nano fluid were studied and these researches are very limited in the literature. Last studies proved that Nano fluids are increasing thermal efficiency especially in heat pipes. The outcomes from this study shows that using Nano fluids in ETSCs provides following benefits: Low thermal resistance, high thermal conductivity, higher working temperatures, acceleration in reaching working temperature and improvement in efficiency.

🔖

Bu Makaleye Atıf Yap

Su, U. Ö., Sözen, A., Menlik, T. (2019). Isı Borulu Güneş Kollektörlerinde Nano Çözelti ile Performansın İyileştirilmesi. Politeknik Dergisi, Cilt: 22 Sayı: 1, 245–257. https://doi.org/10.2339/politeknik.512092

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (80)

  1. Hussein A. K., Lib D., Kolsic L., Katad S., Sahooe B., A Review of Nano Fluid Role to Improve the Performance of the Heat pipe Solar Collectors, Energy Procedia 109 ( 2017 ) 417 – 424
  2. Sabiha M. R., Saidur R., Mekhilef S., Mahian O., Progress and latest developments of evacuated tube solar collectors, Renewable and Sustainable Energy Reviews
  3. Muhammad J. M., Muhammad I. A., Sidik N. A. C., Yazid M. N. A. M., Thermal performance enhancement of flat-plate and evacuated tube solar collectors using nanofluid, International Communications in Heat and Mass Transfer 76 (2016) 6–15
  4. Arslan G. (2007), Üç Kolonlu Titreşimli Isı Borusunun Matematiksel Modellenmesi Ve Deneysel İncelenmesi, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü 2007
  5. Leong K.Y., Ong H. C., Amer N.H., Norazrina M.J., Risby M.S., KuAhmad K.Z., An overview on current application of nanofluids in solar thermal collector and its challenges, Renewable and Sustainable Energy Reviews 53 (2016) 1092 – 1105
  6. Devendiran D. K., Amirtham V. A., A review on preparation, characterization, properties and applications of nanofluids, Renewable and Sustainable Energy Reviews 60 (2016) 21 – 40
  7. Akilu S., Sharma K.V., Baheta A. T., Mamat R., A review of thermo physical properties of water based composite nano fluids, Renewable and Sustainable Energy Reviews 66 (2016) 654 –678
  8. ERSÖZ M. A., YILDIZ A., Isı Borulu Vakum Tüp Güneş Kollektörlerinde Optimum Boru Çapının Belirlenmesi, Abdullah Yıldız Şablon 28.03.2013
  9. ACAR B., ÖZ E. S. ve GEDİK E., Ayrık Ve Birleşik Isı Borulu Kollektör Verimlerinin Deneysel Olarak İncelenmesi, Makine Eğitimi Bölümü, Teknik Eğitim Fakültesi, Karabük Üniversitesi
  10. Sarsam W. S., Kazi S.N., Badarudin A., A review of studies on using nanofluids in flat-plate solar collectors, Solar Energy 122 (2015) 1245–1265
  11. Ghaderian J., Sidik N. A. C., An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector, International Journal of Heat and Mass Transfer 108 (2017) 972–987
  12. Krishnam M, Bose S., Das C., Boron nitride (BN) nanofluids as cooling agent in thermal management system (TMS), Applied Thermal Engineering 106 (2016) 951–958
  13. Beybin İ., Kurt M., Ertürk H., Experimental investigation of heat transfer enhancement and viscosity change of hBN nanofluids, Experimental Thermal and Fluid Science 77 (2016) 272–283
  14. İnternet: Bor Rezervleri (2014-2015-2018) URL: http://www.boren.gov.tr/tr/bor/bor-rezervleri Son Erişim Tarihi: 10.10.2018
  15. Environmental Health & Safety (EHS), Nanomaterials Safety Guidelines, Concordia University
  16. Li Y., Zhou J., Luo Z, Tung S., Schneider E., Wu J. and Li X, Investigation on two abnormal phenomena about thermal conductivity enhancement of BN/EG nanofluids, Li et al. Nanoscale Research Letters 2011, 6:443
  17. Jahanbakhsh A., Haghgou H.R., Alizadeh S., Experimental analysis of a heat pipe operated solar collector using water–ethanol solution as the working fluid, Solar Energy 118 (2015) 267–275
  18. Liu Z. H., Li Y. Y., A new frontier of nanofluid research – Application of nanofluids in heat pipes, International Journal of Heat and Mass Transfer 55 (2012) 6786–6797
  19. Poplaski L. M., Benn S. P., Faghri A., Thermal performance of heat pipes using nanofluids, International Journal of Heat and Mass Transfer 107 (2017) 358–371
  20. Javadi F.S., Saidur R., Kamalisarvestani M., Investigating performance improvement of solar collectors by using nano fluids, Renewable and Sustainable Energy Reviews 28 (2013) 232 – 245
  21. Menlik T., Sözen A., Gürü M., Oztas S. ¸ Heat transfer enhancement using MgO/water nanofluid in heat pipe, Journal of the Energy Institute 88 (2015) 247 – 257
  22. Menlik T., Sözen A., Gürü M., Boran K., Kılıç F., Aktaş M., Çakır M.T., A comparative investigation on the effect of fly-ash and alümina nanofluids on the thermal performance of two-phase closed thermo-syphon heat pipes, Applied Thermal Engineering 96 (2016) 330–337
  23. Sözen A., Özbaş E., Menlik T., Çakır M. T., Gürü M., Boran K., Improving the thermal performance of diffusion absorption refrigeration system with alümina nanofluids: An experimental study, international journal ofrefrigeration 44 (2014) 73 - 8 0
  24. Yan S., Wanga F., Shi Z., Tian R., Heat transfer property of SiO2/water nanofluid flow inside solar collector vacuum tubes, Applied Thermal Engineering 118 (2017) 385–391
  25. Ghaderian J., Sidik N. A. C., Kasaeian A, Ghaderian S., Okhovat A, Pakzadeh A., Samion S., Yahya W. J., Performance of copper oxide/distilled water nanofluid in evacuated tube solar collector (ETSC) water heater with internal coil under thermosyphon system circulations, Applied Thermal Engineering 121 (2017) 520–536
  26. Kim H., Kim J., Cho H., Experimental study on performance improvement of U-tube solar collector depending on nanoparticle size and concentration of Al2O3 nanofluid, Energy 118 (2017) 1304 – 1312
  27. Iranmanesh S., Ong H. C., Ang B. C., Sadeghinezhad E., Esmaeilzadeh A., Mehrali M., Thermal performance enhancement of an evacuated tube solar collector using graphene nanoplatelets nanofluid, Journal of Cleaner Production 162 (2017) 121 – 129
  28. Pisea G. A.,.Salveb S. S., Pisea A. T., Pisea A. A., Investigation of Solar Heat Pipe Collector Using Nanofluid and Surfactant, Energy Procedia 90 ( 2016 ) 481 – 491
  29. ÇİFTÇİ E., SÖZEN A., KARAMAN E., TiO2 İçeren Nanoakışkan Kullanımının Isı Borusu Performansına Etkisinin Deneysel Olarak İncelenmesi, Gazi Üniversitesi, Teknoloji Fakültesi, Enerji Sistemleri Mühendisliği, Ankara
  30. SÖZEN A., Variyenli H. İ., ÖZDEMİR M. B., GÜRÜ M., AYTAÇ İ., Heat transfer enhancement using alumina and fly ash nanofluids in parallel and cross-flow concentric tube heat exchangers, Journal of the Energy Institute 89 (2016) 414 – 424
  31. A. Sözen, M. Gürü, T. Menlik & M. Aktaş, Utilization of blast furnace slag nano-fluids in two-phase closed thermos-syphon heat pipes for enhancing heat transfer, A Journal of Thermal Energy Generation, Transport, Storage, and Conversion
  32. Wang W., Duan G., Li J., Zhao W., Li C., ZLiu C., The preparation and thermal performance research of spherical Ag-H2O nanofluids & applied in heat pipe, Applied Thermal Engineering 116 (2017) 811–822
  33. Du M., Li G., Preparation of silane-capped boron nanoparticles with enhanced dispersibility in hydrocarbon fuels, Fuel 194 (2017) 75–82
  34. Sadeghinezhad E., Mehrali M., Rosen M. A., Akhiani A. R., Latibari S. T., Mehrali M., Metselaar H. S. C., Experimental investigation of the effect of graphene nanofluids on heat pipe thermal performance, Applied Thermal Engineering 100 (2016) 775–787
  35. Pryazhnikov M.I., Minakov A.V., Rudyak V. Y., Guzei D.V., Thermal conductivity measurements of nanofluids, International Journal of Heat and Mass Transfer 104 (2017) 1275–1282
  36. Paul G., Chopkar M., Manna I., Das P.K., Techniques for measuring the thermal conductivity of nanofluids: A review, Renewable and Sustainable Energy Reviews 14 (2010) 1913–1924
  37. Li Y., Wang Y., Lv Q., Qin Z., Liu X., Synthesis of uniform plate-like boron nitride nanoparticles from boron oxide by ball milling and annealing process, Materials Letters108(2013)96–102
  38. Huminic G., Huminic A., Numerical study on heat transfer characteristics of thermosyphon heat pipes using nanofluids, Energy Conversion and Management 76 (2013) 393–399
  39. El-Brolossy T. A., O. Saber O., Non-intrusive method for thermal properties measurement of nanofluids, Experimental Thermal and Fluid Science 44 (2013) 498–503
  40. Nagarajan P. K., Subramani J., Suyambazhahan S., Sathyamurthy R., Nanofluids for solar collector applications: A Review, Energy Procedia 61 ( 2014 ) 2416 – 2434
  41. Chen M., He Y., Zhu J., Wen D., Investigating the collector efficiency of silver nanofluids based direct absorption solar collectors, Applied Energy 181 (2016) 65–74
  42. Saidur R., Leong K. Y., Mohammad H. A., A review on applications and challenges of nanofluids, Renewable and Sustainable Energy Reviews 15 (2011) 1646–1668
  43. Hussein A. K., Lib D., Kolsic L., Katad S., Sahooe B., A Review of Nano Fluid Role to Improve the Performance of the Heat pipe Solar Collectors, Energy Procedia 109 ( 2017 ) 417 – 424
  44. Sabiha M. R., Saidur R., Mekhilef S., Mahian O., Progress and latest developments of evacuated tube solar collectors, Renewable and Sustainable Energy Reviews
  45. Muhammad J. M., Muhammad I. A., Sidik N. A. C., Yazid M. N. A. M., Thermal performance enhancement of flat-plate and evacuated tube solar collectors using nanofluid, International Communications in Heat and Mass Transfer 76 (2016) 6–15
  46. Leong K.Y., Ong H. C., Amer N.H., Norazrina M.J., Risby M.S., KuAhmad K.Z., An overview on current application of nanofluids in solar thermal collector and its challenges, Renewable and Sustainable Energy Reviews 53 (2016) 1092 – 1105
  47. Devendiran D. K., Amirtham V. A., A review on preparation, characterization, properties and applications of nanofluids, Renewable and Sustainable Energy Reviews 60 (2016) 21 – 40
  48. Akilu S., Sharma K.V., Baheta A. T., Mamat R., A review of thermo physical properties of water based composite nano fluids, Renewable and Sustainable Energy Reviews 66 (2016) 654 –678
  49. ERSÖZ M. A., YILDIZ A., Isı Borulu Vakum Tüp Güneş Kollektörlerinde Optimum Boru Çapının Belirlenmesi, Abdullah Yıldız Şablon 28.03.2013
  50. ACAR B., ÖZ E. S. ve GEDİK E., Ayrık Ve Birleşik Isı Borulu Kollektör Verimlerinin Deneysel Olarak İncelenmesi, Makine Eğitimi Bölümü, Teknik Eğitim Fakültesi, Karabük Üniversitesi
  51. Sarsam W. S., Kazi S.N., Badarudin A., A review of studies on using nanofluids in flat-plate solar collectors, Solar Energy 122 (2015) 1245–1265
  52. Ghaderian J., Sidik N. A. C., An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector, International Journal of Heat and Mass Transfer 108 (2017) 972–987
  53. Krishnam M, Bose S., Das C., Boron nitride (BN) nanofluids as cooling agent in thermal management system (TMS), Applied Thermal Engineering 106 (2016) 951–958
  54. Beybin İ., Kurt M., Ertürk H., Experimental investigation of heat transfer enhancement and viscosity change of hBN nanofluids, Experimental Thermal and Fluid Science 77 (2016) 272–283
  55. Li Y., Zhou J., Luo Z, Tung S., Schneider E., Wu J. and Li X, Investigation on two abnormal phenomena about thermal conductivity enhancement of BN/EG nanofluids, Li et al. Nanoscale Research Letters 2011, 6:443
  56. Jahanbakhsh A., Haghgou H.R., Alizadeh S., Experimental analysis of a heat pipe operated solar collector using water–ethanol solution as the working fluid, Solar Energy 118 (2015) 267–275
  57. Liu Z. H., Li Y. Y., A new frontier of nanofluid research – Application of nanofluids in heat pipes, International Journal of Heat and Mass Transfer 55 (2012) 6786–6797
  58. Poplaski L. M., Benn S. P., Faghri A., Thermal performance of heat pipes using nanofluids, International Journal of Heat and Mass Transfer 107 (2017) 358–371
  59. Javadi F.S., Saidur R., Kamalisarvestani M., Investigating performance improvement of solar collectors by using nano fluids, Renewable and Sustainable Energy Reviews 28 (2013) 232 – 245
  60. Menlik T., Sözen A., Gürü M., Oztas S. ¸ Heat transfer enhancement using MgO/water nanofluid in heat pipe, Journal of the Energy Institute 88 (2015) 247 – 257
  61. Menlik T., Sözen A., Gürü M., Boran K., Kılıç F., Aktaş M., Çakır M.T., A comparative investigation on the effect of fly-ash and alümina nanofluids on the thermal performance of two-phase closed thermo-syphon heat pipes, Applied Thermal Engineering 96 (2016) 330–337
  62. Sözen A., Özbaş E., Menlik T., Çakır M. T., Gürü M., Boran K., Improving the thermal performance of diffusion absorption refrigeration system with alümina nanofluids: An experimental study, international journal ofrefrigeration 44 (2014) 73 - 8 0
  63. Yan S., Wanga F., Shi Z., Tian R., Heat transfer property of SiO2/water nanofluid flow inside solar collector vacuum tubes, Applied Thermal Engineering 118 (2017) 385–391
  64. Ghaderian J., Sidik N. A. C., Kasaeian A, Ghaderian S., Okhovat A, Pakzadeh A., Samion S., Yahya W. J., Performance of copper oxide/distilled water nanofluid in evacuated tube solar collector (ETSC) water heater with internal coil under thermosyphon system circulations, Applied Thermal Engineering 121 (2017) 520–536
  65. Kim H., Kim J., Cho H., Experimental study on performance improvement of U-tube solar collector depending on nanoparticle size and concentration of Al2O3 nanofluid, Energy 118 (2017) 1304 – 1312
  66. Iranmanesh S., Ong H. C., Ang B. C., Sadeghinezhad E., Esmaeilzadeh A., Mehrali M., Thermal performance enhancement of an evacuated tube solar collector using graphene nanoplatelets nanofluid, Journal of Cleaner Production 162 (2017) 121 – 129
  67. Pisea G. A.,.Salveb S. S., Pisea A. T., Pisea A. A., Investigation of Solar Heat Pipe Collector Using Nanofluid and Surfactant, Energy Procedia 90 ( 2016 ) 481 – 491
  68. ÇİFTÇİ E., SÖZEN A., KARAMAN E., TiO2 İçeren Nanoakışkan Kullanımının Isı Borusu Performansına Etkisinin Deneysel Olarak İncelenmesi, Gazi Üniversitesi, Teknoloji Fakültesi, Enerji Sistemleri Mühendisliği, Ankara
  69. SÖZEN A., Variyenli H. İ., ÖZDEMİR M. B., GÜRÜ M., AYTAÇ İ., Heat transfer enhancement using alumina and fly ash nanofluids in parallel and cross-flow concentric tube heat exchangers, Journal of the Energy Institute 89 (2016) 414 – 424
  70. Wang W., Duan G., Li J., Zhao W., Li C., ZLiu C., The preparation and thermal performance research of spherical Ag-H2O nanofluids & applied in heat pipe, Applied Thermal Engineering 116 (2017) 811–822
  71. Du M., Li G., Preparation of silane-capped boron nanoparticles with enhanced dispersibility in hydrocarbon fuels, Fuel 194 (2017) 75–82
  72. Sadeghinezhad E., Mehrali M., Rosen M. A., Akhiani A. R., Latibari S. T., Mehrali M., Metselaar H. S. C., Experimental investigation of the effect of graphene nanofluids on heat pipe thermal performance, Applied Thermal Engineering 100 (2016) 775–787
  73. Pryazhnikov M.I., Minakov A.V., Rudyak V. Y., Guzei D.V., Thermal conductivity measurements of nanofluids, International Journal of Heat and Mass Transfer 104 (2017) 1275–1282
  74. Paul G., Chopkar M., Manna I., Das P.K., Techniques for measuring the thermal conductivity of nanofluids: A review, Renewable and Sustainable Energy Reviews 14 (2010) 1913–1924
  75. Li Y., Wang Y., Lv Q., Qin Z., Liu X., Synthesis of uniform plate-like boron nitride nanoparticles from boron oxide by ball milling and annealing process, Materials Letters108(2013)96–102
  76. Huminic G., Huminic A., Numerical study on heat transfer characteristics of thermosyphon heat pipes using nanofluids, Energy Conversion and Management 76 (2013) 393–399
  77. El-Brolossy T. A., O. Saber O., Non-intrusive method for thermal properties measurement of nanofluids, Experimental Thermal and Fluid Science 44 (2013) 498–503
  78. Nagarajan P. K., Subramani J., Suyambazhahan S., Sathyamurthy R., Nanofluids for solar collector applications: A Review, Energy Procedia 61 ( 2014 ) 2416 – 2434
  79. Chen M., He Y., Zhu J., Wen D., Investigating the collector efficiency of silver nanofluids based direct absorption solar collectors, Applied Energy 181 (2016) 65–74
  80. Saidur R., Leong K. Y., Mohammad H. A., A review on applications and challenges of nanofluids, Renewable and Sustainable Energy Reviews 15 (2011) 1646–1668