Dergiler / Gazi University Journal of Science / 2010 / Volume: 16 Issue: 2

EFFECT OF THE CORNER BLOCK DIMENSION ON TENSILE STRENGTH OF T-TYPE DOWEL JOINTS FOR FRAME CONSTRUCTION

Sayfa
—
Yayın Tarihi
2010-08-06
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

According to the test results, beech wood exhibited beter performance than pine wood, and 40x40x25 mm corner block was more supportive to the structure than other corner blocks.   Key Words: Tensile strength, corner block, dowel joints.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:ABSTRACT Effect of the corner block dimension on tensile strength for T-type glued dowel joints has been studied.
📊
Temel Bulgular & Veri:Specimens, measuring of 30x30x25 mm, 40x40x25 mm, 50x50x25 mm ve 60x60x25 mm corner blocks were joined with beech   dowels.
💡
Sonuç & Katkı:According to the test results, beech wood exhibited beter performance than pine wood, and 40x40x25 mm corner block was more supportive to the structure than other corner blocks.   Key Words: Tensile strength, corner block, dowel joints.
🔬Tür:Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Tensile strength · corner block · dowel joints.

Abstract

ABSTRACT Effect of the corner block dimension on tensile strength for T-type glued dowel joints has been studied. For this purpose, pine wood (Pinus sylvestris L.) and beech (Fagus orientalis Lipsky) wood were used. Specimens, measuring of 30x30x25 mm, 40x40x25 mm, 50x50x25 mm ve 60x60x25 mm corner blocks were joined with beech   dowels. Polyvinylacetate (PVAc) adhesive was used in gluing of dowel and the corner blocks. Tests were carried out according to the principles of ASTM-D 1037. According to the test results, beech wood exhibited beter performance than pine wood, and 40x40x25 mm corner block was more supportive to the structure than other corner blocks.   Key Words: Tensile strength, corner block, dowel joints.

🔖

Bu Makaleye Atıf Yap

Efe, H., Kasal, A. (2010). EFFECT OF THE CORNER BLOCK DIMENSION ON TENSILE STRENGTH OF T-TYPE DOWEL JOINTS FOR FRAME CONSTRUCTION. Gazi University Journal of Science, Volume: 16 Issue: 2. https://ajindex.com/articles/1270308

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...