KaydedilenlerDerginizi ekleyin

Dergiler / Gazi University Journal of Science / 2026 / Volume: 19 Issue: 3

Bending Strength of Screwed Corner Joints with Different Materials

Ali Kasal
Sıddık Şener
Çağatay Belgin
Hasan Efe
Sayfa
—
Yayın Tarihi
2010-03-29
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result of these tests it has been determined that the joints with glue are better than the ones without glue and the strength of fiberboard is better than particleboard.     Keywords: Bending strength, compression test, tension test, particleboard, wood testing, screws.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Tests were carried out in order to determine the bending strength with compression and tension force with and without glue in addition to screws on furniture corner joints in a construction case.
📊
Temel Bulgular & Veri:In the connection, two types of screws which have dimensions of 4/50 mm and 5/60 mm were used.
💡
Sonuç & Katkı:As a result of these tests it has been determined that the joints with glue are better than the ones without glue and the strength of fiberboard is better than particleboard.     Keywords: Bending strength, compression test, tension test, particleboard, wood testing, screws.
🔬Tür:Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Bending strength · compression test · tension test

Abstract

Tests were carried out in order to determine the bending strength with compression and tension force with and without glue in addition to screws on furniture corner joints in a construction case. The specimens were prepared with particleboard and medium density fiberboard (MDF) surfaced with a synthetic resin sheet. In the connection, two types of screws which have dimensions of 4/50 mm and 5/60 mm were used. For the glued joints, polyurethane Desmodur-VTKA adhesive was used. As a result of these tests it has been determined that the joints with glue are better than the ones without glue and the strength of fiberboard is better than particleboard.     Keywords: Bending strength, compression test, tension test, particleboard, wood testing, screws.

🔖

Bu Makaleye Atıf Yap

Kasal, A., Şener, S., Belgin, Ç., Efe, H. (2010). Bending Strength of Screwed Corner Joints with Different Materials. Gazi University Journal of Science, Volume: 19 Issue: 3. https://ajindex.com/articles/1270107

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Hill, M.D., Eckelman, C.A., “Flexibility and bending strength of mortise and tenon joints”, Furniture Design & Manufacturing magazine, 25- 33 (1973).
  2. Eckelman, C.A., “Which screw holds best?” Furniture Design & Manufacturing, magazine 25- 26 (1974).
  3. Zhang, J.L., Eckelman, C.A., “The bending moment resistance of single-dowel corner joints in case construction”, Forest Products J, 43(6): 19-24 (1993).
  4. Zhang, J.L., Eckelman, C.A., “Rational design of multi-dowel corner joints in case construction”, Forest Products J, 43(11/12): 52-58 (1993).
  5. Eckelman, C.A., Lin, F.C., “Bending strength of corner joints constructed with injection-molded splines”, Forest Product J, 47(4): 89-92 (1997).
  6. Efe, H., “Withdrawal strength of screws on woods plates were using funiture industry”, Master thesis, Gazi University, Journal of Scienece Knowledge Institute, Ankara, 12-16 (1992).
  7. Efe, H., Kasal, A., Tension strength of case construction with and without demontable corner joints. Industrial Architecture Journal of Faculty of Education Ankara, 8(8): 61-74 (2000).
  8. Daudeville, L., Davenne, L., Yasumura, M., “Prediction of the load carrying capacity of bolted timber joints”, Wood Science and Technology, 33: 15-29 (1999).
  9. Jensen, J.L., Koizumi, A., Sasaki, T., Tamura, Y., Iijima, Y., “Axially loaded glued-in hardwood dowels”, Wood Science and Technology, 35: 73- 83 (2001).
  10. Barr, B.I.G., Abusiaf, H.F., Şener, S., “Size effect and fracture energy studies using compact compression specimens”, RILEM Materials and Structures, 31: 36-41 (1998).
  11. Fibre building boards-hard and medium boards (1982) Turkish Code of Practice TS 64.
  12. Fiberboards and particleboards surfaced with synthetic resin (1974) Turkish Code of Practice TS 1770.
  13. Eckelman, C.A., Lin, F.C., “Bending strength of corner joints constructed with injection-molded splines”, Forest Product J, 47(4): 89-92 (1997).