KaydedilenlerDerginizi ekleyin

Dergiler / Gazi University Journal of Science / 2026 / Volume: 36 Issue: 2

Theoretical and Experimental Comparison of Revolving Vane Compressors and Rolling Piston Compressors

Duygu Gürkan(GAZİ ÜNİVERSİTESİ)0000-0002-2917-3330
Melih Okur(GAZİ ÜNİVERSİTESİ)0000-0002-6017-1050
İhsan Korkut(GAZİ ÜNİVERSİTESİ)0000-0002-5001-4449
Sayfa
—
Yayın Tarihi
2023-06-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

When the test results are examined, it is seen that the rolling piston compressor consumes 1.3 times less power than the electric motor for 2700 rpm and 3 bar pressure, due to the lower inertia forces compared to the revolving vane compressor.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Rotary compressors have some advantages such as lower noise, vibration, lower cost and few parts.
📊
Temel Bulgular & Veri:In this study, two different designs, rolling piston and revolving vane, were made to increase the performance of the double-stage, rotary compressor with a volume of 22.6 cc.
💡
Sonuç & Katkı:When the test results are examined, it is seen that the rolling piston compressor consumes 1.3 times less power than the electric motor for 2700 rpm and 3 bar pressure, due to the lower inertia forces compared to the revolving vane compressor.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Rotary compressors · Revolving vane compressor · Rolling piston compressor

Abstract

Rotary compressors have some advantages such as lower noise, vibration, lower cost and few parts. For this reason, it is preferred more than its substitutes such as piston, screw and sliding compressors in cooling and air-conditioning systems. In this study, two different designs, rolling piston and revolving vane, were made to increase the performance of the double-stage, rotary compressor with a volume of 22.6 cc. When the test results are examined, it is seen that the rolling piston compressor consumes 1.3 times less power than the electric motor for 2700 rpm and 3 bar pressure, due to the lower inertia forces compared to the revolving vane compressor.

🔖

Bu Makaleye Atıf Yap

Gürkan, D., Okur, M., Korkut, İ. (2023). Theoretical and Experimental Comparison of Revolving Vane Compressors and Rolling Piston Compressors. Gazi University Journal of Science, Volume: 36 Issue: 2. https://doi.org/10.35378/gujs.1054160

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (48)

  1. Bulut, Y. M., Yıldız, Z., “Comparing energy demand estimation using various statistical methods: the case of Turkey”, Gazi University Journal of Science, 29(2): 237-244, (2016).
  2. Düz, H., “Storing solar energy inside compressed air through a heat machine mechanism”, Gazi University Journal of Science, 29(2): 245-251, (2016).
  3. Cai, D., Qiu, C., Pan, J., Yang, X., He, G., Tetsuhide, Y., Chen, X., Li, H., “Leakage characteristics and an updated volumetric efficiency prediction model of rolling piston type rotary compressor for small capacity air-conditioner and heat pump applications”, Applied Thermal Engineering, 121: 1080-1094, (2017). DOI: 10.1016/j.applthermaleng.2017.04.148
  4. Gu, H., Chen, Y., Wu, J., Jiang, Y., and Sundén, B., “Impact of discharge port configurations on the performance of sliding vane rotary compressors with a rotating cylinder”, Applied Thermal Engineering, 186: 116526, (2021a). DOI: 10.1016/j.applthermaleng.2020.116526
  5. Gurel, A. E., Agbulut, Ü., Ergun, A., Ceylan, I., “Environmental and economic assessment of a low energy consumption household refrigerator”, Engineering Science and Technology, an International Journal, 23(2): 365-372, (2020). DOI: 10.1016/j.jestch.2019.06.003
  6. Jadhav, T. S., Lele, M. M., “Theoretical energy saving analysis of air conditioning system using heat pipe heat exchanger for Indian climatic zones”, Engineering Science and Technology, an International Journal, 18(4): 669-673, (2015). DOI: 10.1016/j.jestch.2015.04.009
  7. Yamık, H., İçingür, Y., “Dizel Motorlarında Alternatif Yakıt Olarak Etil Esterin Kullanımı”, GÜ Fen Bilimleri Dergisi, 18(3): 545-553, (2005).
  8. Saidur, R., Rahim, N. A., Hasanuzzaman, M., “A review on compressed-air energy use and energy savings”, Renewable and Sustainable Energy Reviews, 14(4): 1135-1153, (2010).
  9. Abdulhussain, M. A., “CFD pretending of vapor and liquid refrigerant mixing in variable speed scroll compressor”, Engineering Science and Technology, an International Journal, 22(1): 168-176. (2019). DOI: 10.1016/j.jestch.2018.07.017
  10. Wang, B., Liu, X., Shi, W., and Ding, Y., “An enhanced rotary compressor with gas injection through a novel end-plate injection structure”, Applied Thermal Engineering, 131: 180-191, (2018). DOI: 10.1016/j.applthermaleng.2017.12.010
  11. Molinaroli, L., Joppolo, C. M., De Antonellis, S., “A semi-empirical model for hermetic rolling piston compressors”, International Journal of Refrigeration, 79: 226-237, (2017). DOI: 10.1016/j.ijrefrig.2017.04.015
  12. Tan, K. M., Ooi, K. T., “Journal bearings design for a novel revolving vane compressor”, International Journal of Refrigeration, 34(1): 94-104, (2011a). DOI: 10.1016/j.ijrefrig.2010.08.012
  13. Chen, Z., Wu, J., Li, G., “Experimental study on the tribological characteristic of vane–roller interface of HC290 rotary compressor with mineral oil”, International Journal of Refrigeration, 94: 205-213, (2018). DOI: 10.1016/j.ijrefrig.2018.01.019
  14. Gu, H., Zhou, X., Chen, Y., Wu, J., Wu, Z., Jiang, Y., Sundén, B., “Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder”, Energy Conversion and Management, 230: 113822, (2021b). DOI: 10.1016/j.enconman.2020.113822
  15. Okur, M., Arabaci, E., “Experimental study of a novel hinged vane rotary turbine–part I: The effect of different vane thickness and vane weight on turbine performance”, International Journal of Refrigeration, 51: 70-76, (2015). DOI: 10.1016/j.ijrefrig.2014.12.012
  16. Ooi, K. T., “Design optimization of a rolling piston compressor for refrigerators”, Applied Thermal Engineering, 25(5-6):813-829, (2005). DOI: 10.1016/j.applthermaleng.2004.07.017
  17. Ooi, K. T., “Assessment of a rotary compressor performance operating at transcritical carbon dioxide cycles”, Applied Thermal Engineering, 28(10): 1160-1167, (2008).
  18. Ooi, K. T., Wong, T. N., “A computer simulation of a rotary compressor for household refrigerators”, Applied Thermal Engineering, 17(1): 65-78, (1997). DOI: 10.1016/1359-4311(96)00013-0
  19. Subiantoro, A., Ooi K. T., “Analytical study of the endface friction of the revolving vane mechanism”, International Journal of Refrigeration, 34(5): 1276-1285 (2011).
  20. Xu, M., Yang, J., “Dynamic and Friction Loss Analysis of the Vane in the Revolving Vane Compressor with the External Driving System”, SAE International Journal of Materials & Manufacturing, 14(4), 375, (2021).
  21. Cai, D., He, G., Yokoyama, T., Tian, Q., Yang, X., Pan, J., “Simulation and comparison of leakage characteristics of R290 in rolling piston type rotary compressor”, International Journal of Refrigeration, 53: 42-54, (2015). DOI: 10.1016/j.ijrefrig.2015.02.001
  22. Ferraris, G., Andrianoely, M. A., Berlioz, A., Dufour, R., “Influence of cylinder pressure on the balancing of a rotary compressor”, Journal of Sound and Vibration, 292(3-5): 899-910, (2006). DOI: 10.1016/j.jsv.2005.09.026
  23. Lee, S. J., Shim, J., Kim, K. C., “Development of capacity modulation compressor based on a two-stage rotary compressor–Part ΙΙ: Performance experiments and P–V analysis”, International Journal of Refrigeration, 61: 82-99, (2016). DOI: 10.1016/j.ijrefrig.2015.09.008
  24. Park, Y. C., “Transient analysis of a variable speed rotary compressor”, Energy Conversion Management, 51(2): 277-287, (2010). DOI: 10.1016/j.enconman.2009.09.023.
  25. Wu, J., Chen, A., “A new structure and theoretical analysis on leakage and performance of an oil-free R290 rolling piston compressor”, International Journal of Refrigeration, 49: 110-118, (2015). DOI: 10.1016/j.ijrefrig.2014.10.007
  26. Shin, M., Na, S., Lee, J., Min, B., Choi, G., “Model analysis of a novel compressor with a dual chamber for high-efficiency systems”. Applied Thermal Engineering, 158, 113717, (2019).
  27. Okur, M., Akmandor, I. S., “Experimental investigation of hinged and spring loaded rolling piston compressors pertaining to a turbo rotary engine”, Applied Thermal Engineering, 31(6-7): 1031-1038, (2011). DOI: 10.1016/j.applthermaleng.2010.11.027
  28. Lee, Y. Z., Oh, S. D., “Friction and wear of the rotary compressor vane–roller surfaces for several sliding conditions”, Wear, 255(7-12): 1168-1173, (2003). DOI: 10.1016/S0043-1648(03)00278-3
  29. Sung, H. C., “Tribological characteristics of various surface coatings for rotary compressor vane”, Wear, 221(2): 77-85, (1998). DOI: 10.1016/S0043-1648(98)00244-0
  30. Shuxue, X., Guoyuan, M., “Experimental study on two-stage compression refrigeration/heat pump system with dual-cylinder rolling piston compressor”, Applied Thermal Engineering, 62(2): 803-808, (2014). DOI: 10.1016/j.applthermaleng.2013.09.035
  31. Ba, D. C., Deng, W. J., Che, S. G., Li, Y., Guo, H. X., Li, N., Yue, X. J., “Gas dynamics analysis of a rotary compressor based on CFD”, Applied Thermal Engineering, 99: 1263-1269, (2016). DOI: 10.1016/j.applthermaleng.2016.01.062
  32. Shin, M., Na, S., Lee, J., Min, B., Choi, G., “Model analysis of a novel compressor with a dual chamber for high-efficiency systems”, Applied Thermal Engineering, 158: 113717, (2019). DOI: 10.1016/j.applthermaleng.2019.113717
  33. Tan, K. M., Ooi, K. T., “A novel revolving vane compressor with a fixed-vane”, International Journal of Refrigeration, 34(8): 1980-1988, (2011b). DOI: 10.1016/j.ijrefrig.2011.06.010
  34. Teh, Y. L., Ooi, K. T., “Theoretical study of a novel refrigeration compressor–Part I: Design of the revolving vane (RV) compressor and its frictional losses”, International Journal of Refrigeration, 32(5): 1092-1102, (2009a). DOI: 10.1016/j.ijrefrig.2008.09.006
  35. Teh, Y. L., Ooi, K. T., Djamari, D. W., “Theoretical study of a novel refrigeration compressor–Part II: Performance of a rotating discharge valve in the revolving vane (RV) compressor”, International Journal of Refrigeration, 32(5): 1103-1111, (2009b). DOI: 10.1016/j.ijrefrig.2008.09.007
  36. Teh, Y. L., Ooi, K. T., “Theoretical study of a novel refrigeration Compressor-Part III: Lakage loss of the revolving vane (RV) compressor and a comparison with that of the rolling piston type”, International Journal of Refrigeration, 32(5): 945-952, (2009c). DOI: 10.1016/j.ijrefrig.2008.11.001
  37. Tan, K. M., Ooi, K. T., “Experimental study of fixed-vane revolving vane compressor”, Applied Thermal Engineering, 62(1): 207-214, (2014). DOI: 10.1016/j.applthermaleng.2013.09.038
  38. Teh, Y. L., Ooi, K. T., “Experimental study of the revolving vane (RV) compressor”, Applied Thermal Engineering”, 29(14-15): 3235-3245, (2009d). DOI: 10.1016/j.applthermaleng.2009.04.029
  39. Hu, Y., Xu, J., Wan, P., Luo, F., Wu, F., Ren, L. “A study on novel high efficiency vane compressor”, International Compressor Engineering Conference, 2601, (2018).
  40. Ooi, K. T., Shakya, P., “A new compact rotary compressor: coupled vane compressor”, International Compressor Engineering Conference, 2613, (2018).
  41. Ooi, K. T., Shakya, P., “Simulation studies of a coupled vane compressor”, IOP Conference Series: Materials Science and Engineering, 604, 012069, (2019). DOI: 10.1088/1757-899X/604/1/012069
  42. Shakya, P., Ooi, K. T., “Introduction to Coupled Vane compressor: Mathematical modelling with validation”, International Journal of Refrigeration, 117, 23-32, (2020). DOI: 10.1016/j.ijrefrig.2020.01.027
  43. De Lim, Y., Ooi, K. T., “Performance analysis of a U-Vane compressor”, Applied Thermal Engineering, 178, 115570, (2020). DOI: 10.1016/j.applthermaleng.2020.115570
  44. Shakya, P., Ooi, K. T., “Dynamic modelling and experimental validation of Coupled Vane Compressor”, IOP Conference Series: Materials Science and Engineering, 1180, 012029, (2021). DOI: 10.1088/1757-899X/1180/1/012029
  45. Chen, Q. J., Ooi, K. T., “Performance Comparison between Rolling Piston and Coupled Vane Compressor”, International Compressor Engineering Conference, 2708, (2021).
  46. Choo, W. C., Ooi, K. T., “Analysis of the novel multi-vane Revolving Vane compressor–Theoretical modelling and experimental investigations”, International Journal of Refrigeration, 131, 592-603, (2021). DOI: doi.org/10.1016/j.ijrefrig.2021.08.004
  47. Choo, W. C., Ooi, K. T., “Analysis of the novel multi-vane Revolving Vane compressor–Investigation of vane chattering phenomenon through instantaneous working chamber pressure measurements”, International Journal of Refrigeration, 134, 207-218, (2022). DOI: 10.1016/j.ijrefrig.2021.11.020
  48. Aw, K. T., Ooi, K. T., “A Review on Sliding Vane and Rolling Piston Compressors”, Machines, 9(6), 125, (2021). DOI: 10.3390/machines9060125