KaydedilenlerDerginizi ekleyin

Dergiler / Gazi University Journal of Science / 2026 / Volume: 39 Issue: 1

BİNA DIŞ DUVARLARI IÇIN DIŞ CEPHE MANTOLAMA YALITIMININ OPTİMUM KALINLIĞI

Optimum Thickness of Outside Sheathing Insulation for Exterior Walls of Building Envelopes

Ali Şeref Cengiz(GAZIANTEP UNIVERSITY)0000-0001-6626-7363
Mahmut Kaplan(GAZIANTEP UNIVERSITY)0000-0003-2675-9229
M. Sait Söylemez(GAZIANTEP UNIVERSITY)0000-0001-8570-1321
Sayfa
—
Yayın Tarihi
2026-02-03
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

New York şehrinde taş yünü ve yalıtım levhası için sırasıyla optimum yalıtım kalınlığı 0,064 m, 0,12 m ve geri ödeme süresi 4,3 ve 5,9 yıl olarak belirlenmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Dış duvarlar için ısı yalıtımı kullanmak, binaların enerji talebini ve çevre üzerindeki etkilerini azaltmak için çok etkili bir yöntemdir.
📊
Temel Bulgular & Veri:Bu çalışmanın amacı, binalardaki enerji tüketimini daha verimli hale getirmek için optimum dış mantolama kalınlığını belirlemektir.
💡
Sonuç & Katkı:New York şehrinde taş yünü ve yalıtım levhası için sırasıyla optimum yalıtım kalınlığı 0,064 m, 0,12 m ve geri ödeme süresi 4,3 ve 5,9 yıl olarak belirlenmiştir.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Sheathing insulation · Thickness · Optimization

Özet

Dış duvarlar için ısı yalıtımı kullanmak, binaların enerji talebini ve çevre üzerindeki etkilerini azaltmak için çok etkili bir yöntemdir. Bu çalışmanın amacı, binalardaki enerji tüketimini daha verimli hale getirmek için optimum dış mantolama kalınlığını belirlemektir. Tasarım özelliklerinin optimum mantolama kalınlığı üzerindeki etkisi, MATLAB kullanılarak Amerika Birleşik Devletleri test şehirleri için incelenmiştir. Binalarda enerji tasarrufunu artırmak için mantolama kalınlığının optimum noktaya yakın seçilmelidir. New York şehrinde taş yünü ve yalıtım levhası için sırasıyla optimum yalıtım kalınlığı 0,064 m, 0,12 m ve geri ödeme süresi 4,3 ve 5,9 yıl olarak belirlenmiştir.

Abstract

Due to the high heat losses in the buildings, using thermal insulation for external walls is a very effective method to decrease the building energy demand and their influences on environment. The goal of this work is to determine optimal exterior sheathing thickness to make energy consumption in the buildings more efficient. The P1-P2 method combined with the degree day method is used to predict the optimum sheathing thickness for the United States test cities. The rockwool and insulating board are considered for the insulation materials. The sheathing thickness must be chosen near the optimum point to augment energy savings in the buildings. It is seen that the rockwool material having low thermal conductivity leads to a reduction in the payback period and insulation thickness with high net savings. The optimal insulation thicknesses of 0.064 m and 0.12 m with the payback period of 4.4 and 5.9 years were determined for the rockwool and insulating board, respectively, in New York City.

🔖

Bu Makaleye Atıf Yap

Cengiz, A. Ş., Kaplan, M., Söylemez, M. S. (2026). BİNA DIŞ DUVARLARI IÇIN DIŞ CEPHE MANTOLAMA YALITIMININ OPTİMUM KALINLIĞI. Gazi University Journal of Science, Volume: 39 Issue: 1. https://doi.org/10.35378/gujs.1700432

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (25)

  1. Lopes, G.C., Vicente, R., Azenha, M., and Ferreira, T.M., "A systematic review of Prefabricated Enclosure Wall Panel Systems: Focus on technology driven for performance requirements", Sustainable Cities and Society, 40: 688-703, (2018). DOI: https://doi.org/10.1016/j.scs.2017.12.027
  2. Vijayan, D.S., Sivasuriyan, A., Patchamuthu, P., and Jayaseelan, R., "Thermal performance of energy-efficient buildings for sustainable development", Environmental Science and Pollution Research, 29: 51130-51142, (2022). DOI: https://doi.org/10.1007/s11356-021-17602-3
  3. Chandhran, K.S.D., and Elavenil, S., "A comprehensive state-of-the-art review of sustainable thermal insulation system used in external walls for reduction in energy consumption in buildings", International Journal of Green Energy, 20(9): 895-913, (2023). DOI: https://doi.org/10.1080/15435075.2022.2120769
  4. Li, X., and and Tingley, D.D., "A whole life, national approach to optimize the thickness of wall insulation", Renewable and Sustainable Energy Reviews, 174: 113137, (2023). DOI: https://doi.org/10.1016/j.rser.2022.113137
  5. Kaynakli, O., "A review of the economical and optimum thermal insulation thickness for building applications", Renewable and Sustainable Energy Reviews, 16(1): 415-425, (2012). DOI: https://doi.org/10.1016/j.rser.2011.08.006
  6. Wati, E., Meukam, P., and Nematchoua, M.K., "Influence of external shading on optimum insulation thickness of building walls in a tropical region", Applied Thermal Engineering, 90: 754-762, (2015). DOI: https://doi.org/10.1016/j.applthermaleng.2015.07.052
  7. Ashouri, M., Astaraei, F.R., Ghasempour, R, Ahmadi, M.H., and Feidt, M., "Optimum insulation thickness determination of a building wall using exergetic life cycle assessment", Applied Thermal Engineering, 106: 307-315, (2016). DOI: https://doi.org/10.1016/j.applthermaleng.2016.05.190
  8. Aktemur, C., Bılgın, F., and Tunçkol, S., "Optimisation on the thermal insulation layer thickness in buildings with environmental analysis: an updated comprehensive study for Turkey’s all provinces", Journal of Thermal Engineering, 7: 1239-1256, (2021). DOI: https://doi.org/10.18186/thermal.978057
  9. Karamı, M., Anbarzadeh, E., and Delfanı, S., "Effect of HVAC system size on the optimum insulation thickness of the buildings in different climate zones", Journal of Thermal Engineering, 8: 249-267, (2021). DOI: https://doi.org/10.18186/thermal.1086236
  10. Benallel, A., Tilioua, A., Mellaikhafi, A., and Hamdi, M.A.A., "Thickness optimization of exterior wall insulation for different climatic regions in Morocco", Materials Today: Proceedings, 58: 1541-1548, (2022). DOI: https://doi.org/10.1016/j.matpr.2022.03.324
  11. Feng, Y.H, Yu, Z.T, Lu, J., and Xu, X., "Optimum insulation thickness of external walls by integrating indoor moisture buffering effect: a case study in the hot-summer-cold-winter zone of China.", Journal of Zhejiang University-SCIENCE A, 23(12): 998-1012, (2022). DOI: https://doi.org/10.1631/2023.A2200158
  12. Kharbouch, Y., Boushaba, H., and Ameur, M., "Optimisation of the insulation thickness for the external walls in Morocco while considering the effect of climate change", Thermal Science and Engineering Progress, 35: 101455, (2022). DOI: https://doi.org/10.1016/j.tsep.2022.101455
  13. Malka, L., Kuriqi, A., and Haxhimusa, A., "Optimum insulation thickness design of exterior walls and overhauling cost to enhance the energy efficiency of Albanian's buildings stock", Journal of Cleaner Production, 381: 135160, (2022). DOI: https://doi.org/10.1016/j.jclepro.2022.135160
  14. Ozbek, K., Gelis, K., and Ozyurt, O., "Optimization of external wall insulation thickness in buildings using response surface methodology", International Journal of Energy and Environmental Engineering, 13: 1367-1381, (2022). DOI: https://doi.org/10.1007/s40095-022-00490-9
  15. Aşıkoğlu, A., "Cost analysis of insulation materials used to increase energy performance in buildings with Net Present Value method", Journal of Sustainable Construction Materials and Technologies, 8: 134-145, (2023). DOI: https://doi.org/10.47481/jscmt.1270831
  16. Terhan, M., and Abak, S.S., "Energy, exergy analysis and optimization of insulation thickness on buildings in a low-temperature district heating system", Journal of Thermal Engineering, 9: 161-178, (2023). DOI: https://doi.org/10.18186/thermal.1243502
  17. Fohagui, F.C.V., Koholé, Y.W., Alombah, N.H., Asoh, D.A., and Tchuen, G., "Optimum insulation thickness and exergy savings of building walls in Bamenda: a comparative analysis", Energy Storage and Saving, 3(1): 60-70, (2024). DOI: https://doi.org/10.1016/j.enss.2024.01.001
  18. Shahid, M., Karimi, M.N., and Mishra, A.K., "Optimum insulation thickness for external building walls for different climate zone in India", Journal of Thermal Engineering, 10(5): 1198-1211, (2024). DOI: https://doi.org/10.14744/thermal.0000861
  19. Las-Heras-Casas, J., López-Ochoa, L.M., Olasolo-Alonso, P., and López-González, L.M., "Adapting buildings to climate change by using the optimal thickness of thermal insulation for external walls: the case of Spain (2025–2055)", Journal of Cleaner Production, 490: 144715, (2025). DOI: https://doi.org/10.1016/j.jclepro.2025.144715
  20. Duffie, J. A., and Beckman, W. A., Solar Engineering of Thermal Processes, 4th ed., Jhon Wiley and Sons, New Jersey, 467-469, (2013). DOI: https://doi.org/10.1002/9781118671603
  21. ASHRAE, “2021 ASHRAE Handbook Fundamentals”, ASHRAE, Peachtree Corners, 305-310, (2021).
  22. Bhatnagar, M., Mathur, J., and Garg, V., "Determining base temperature for heating and cooling degree-days for India", Journal of Building Engineering, 18: 270-280, (2018). DOI: https://doi.org/10.1016/j.jobe.2018.03.020
  23. Reddy T., Kreider, J. F., Curtiss, P. S., and Rabl, A., Heating and Cooling of Buildings: Design for Efficiency, 3rd ed., CRC Press, Boca Raton, (2016). DOI: https://doi.org/10.1201/9781315374567
  24. Rahmanian, I., “Thermal and mechanical properties of gypsum boards and their influences on fire resistance of gypsum board based systems”, Phd.Thesis, University of Manchester Faculty of Engineering and Physical Sciences, Manchester, 29-50, (2011).
  25. Kubba, S., Green construction project management and cost oversight, 1st ed., Butterworth-Heinemann, Oxford (2010). DOI: https://doi.org/10.1016/C2009-0-20060-2