Dergiler / Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2026 / Cilt: 19 Sayı: 2

İki Boyutlu Ba₂PbI₄ Perovskit Katmanı İçeren Güneş Hücresi Yapısının Verim Optimizasyonu

Efficiency Optimization of a Solar Cell Structure Containing a Two-Dimensional Ba₂PbI₄ Perovskite Layer

Orhan Polat(Erzurum Teknik Üniversitesi)0009-0006-7530-0624
Çağlar Duman(Erzurum Teknik Üniversitesi)0000-0002-1845-8605
Sayfa
242–261
Yayın Tarihi
2026-08-31
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Simülasyon sonuçları, 3B perovskit katman kalınlığının artırılmasının kısa devre akım yoğunluğunu (Jsc) artırırken açık devre gerilimini (Voc) ve dolgu faktörünü (FF) azalttığını, 2B perovskit katman kalınlığının artırılmasının ise hücre performansını olumsuz etkilediğini ortaya koymuştur.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Perovskit güneş hücrelerinin güç dönüşüm verimliliği (PCE) hızla artarken, 3 boyutlu (3B) perovskitlerin neme, ışığa ve ısıya karşı düşük stabilitesi önemli bir sorun olarak varlığını sürdürmektedir.
📊
Temel Bulgular & Veri:Bu çalışmada, 2 boyutlu (2B) perovskit katmanları içeren 3B perovskit güneş hücresi yapısının stabilitesini ve performansını artırmak amaçlanmıştır.
💡
Sonuç & Katkı:Simülasyon sonuçları, 3B perovskit katman kalınlığının artırılmasının kısa devre akım yoğunluğunu (Jsc) artırırken açık devre gerilimini (Voc) ve dolgu faktörünü (FF) azalttığını, 2B perovskit katman kalınlığının artırılmasının ise hücre performansını olumsuz etkilediğini ortaya koymuştur.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:2D/3D perovskite · stability · solar cell

Özet

Perovskit güneş hücrelerinin güç dönüşüm verimliliği (PCE) hızla artarken, 3 boyutlu (3B) perovskitlerin neme, ışığa ve ısıya karşı düşük stabilitesi önemli bir sorun olarak varlığını sürdürmektedir. Bu çalışmada, 2 boyutlu (2B) perovskit katmanları içeren 3B perovskit güneş hücresi yapısının stabilitesini ve performansını artırmak amaçlanmıştır. SCAPS-1D yazılımı kullanılarak, FTO/SnO₂/3B Perovskit/2B Perovskit/NiO/Au yapısına sahip NIP tipi bir güneş hücresi, AM1.5G güneş spektrumu ve 300 K ortam sıcaklığı altında modellenmiş ve simüle edilmiştir. En uygun elektron taşıyıcı katman (ETL) ve delik taşıyıcı katman (HTL) malzemeleri sırasıyla kalay dioksit (SnO₂) ve nikel oksit (NiO) olarak belirlenmiştir. Simülasyon sonuçları, 3B perovskit katman kalınlığının artırılmasının kısa devre akım yoğunluğunu (Jsc) artırırken açık devre gerilimini (Voc) ve dolgu faktörünü (FF) azalttığını, 2B perovskit katman kalınlığının artırılmasının ise hücre performansını olumsuz etkilediğini ortaya koymuştur. Ayrıca, 3B perovskit katmanındaki yüksek kusur yoğunluğunun güneş hücresi performansını önemli ölçüde düşürdüğü gözlemlenmiştir. Optimize edilen yapıda, 900 nm kalınlığında 3B perovskit ve 9 nm kalınlığında 2B perovskit katmanları kullanılarak; 1,40 V Voc, 25,59 mA/cm² Jsc, %79,59 FF ve %28,58 PCE değerleri elde edilmiştir. Sınırlı sayıda çalışmada ele alınmış olan bu yenilikçi yaklaşım, güneş hücrelerinin verimlilik ve stabilitesinde önemli gelişmeler sunmaktadır. Bu çalışmada elde edilen yüksek performans değerleri, mevcut literatürdeki çalışmalara kıyasla dikkat çekici ilerlemeleri ortaya koymaktadır

Abstract

As the power conversion efficiency (PCE) of perovskite solar cells rapidly increases, the low stability of 3D perovskites against moisture, light, and heat remains as a significant challenge. In this study, it is aimed to enhance the stability and performance of a 3D perovskite solar cell structure including 2D perovskite layers. Using SCAPS-1D software, an NIP-type solar cell in the structure of FTO/SnO₂/3D Perovskite/2D Perovskite/NiO/Au was modele and simulated under AM1.5G solar spectrum and 300 K ambient temperature. The optimal electron transport layer (ETL) and hole transport layer (HTL) materials were obtained as tin dioxide (SnO₂) and nickel oxide (NiO), respectively. The simulations were also revealed that increasing the 3D perovskite layer thickness enhances short circuit current (Jsc) but reduces open-circuit voltage (Voc) and fill factor (FF) and increasing the thickness of the 2D perovskite layer adversely affects performance of the cell. Additionally, it was observed that higher defect density in the 3D perovskite layer significantly degrades solar cell performance. In the optimized design, a structure comprising a 3D perovskite layer with a thickness of 900 nm and a 2D perovskite layer of 9 nm was achieved Voc of 1.40 V, Jsc of 25.59 mA/cm², FF of 79.59%, and PCE of 28.58%. This innovative approach, which has been explored in only a limited number of studies, offers significant improvements in the efficiency and stability of solar cells. The high performance values obtained in this study demonstrate notable advancements compared to existing literature.

🔖

Bu Makaleye Atıf Yap

Polat, O., Duman, Ç. (2026). İki Boyutlu Ba₂PbI₄ Perovskit Katmanı İçeren Güneş Hücresi Yapısının Verim Optimizasyonu. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 19 Sayı: 2, 242–261. https://doi.org/10.18185/erzifbed.1746076

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (44)

  1. Metcalf, I., Sidhik, S., Zhang, H., Agrawal, A., İkna, J., Hou, J., Hatta, J., and Mohit, A. D., (2023) Synergy of 3D and 2D perovskites for durable, efficient solar cells and beyond, Chemical Reviews, 123 (15), 9565-9652.
  2. Shah, N., Shah, A. A., Leung, P. K., Khan, S., Sun, K., Zhu, X., and Liao, Q., (2023) A review of third generation solar cells, Processes, 11 (6), 1852.
  3. Sharma, S., Jain, K. K., and Sharma, A., (2015) Solar cells: In research and applications-a review, Materials Sciences and Applications, 6, 1145-1155.
  4. Kızıloğlu, V., (2015) Variation of intermediate band solar cell efficiency with the filling factor of the intermediate band (Master’s thesis, Gazi University, Institute of Science, Department of Electrical and Electronics Engineering), p. 59, Ankara, Türkiye.
  5. Sahoo, S. K., Manoharan, B., and Sivakumar, N., (2018) Chapter 1 - introduction: why perovskite and perovskite solar cells?, In: Perovskite Photovoltaics, Thomas, S., and Lin, Z., Elsevier Science and Technology, 1-16.
  6. Zhou, D., Zhou, T., Tian, Y., Zhu, X., and Tu, Y., (2018) Perovskite-based solar cells: Materials, methods, and future perspectives, Journal of Nanomaterials, 2018, 8148072.
  7. Zang, L., and Zhu, Z., (2021) Understanding the impact of dimensionality on the properties of perovskite materials for photovoltaic applications, Nature Materials, 20, 201-216.
  8. Kumar, A., Singh, S., Mohammed, M. K. A., and Shalan, A. E., (2021) Effect of 2D perovskite layer and multivalent defect on the performance of 3D/2D bilayered perovskite solar cells through computational simulation studies, Solar Energy, 223, 193-201.
  9. Kumar, A., Singh, S., Srivastava, K., Sharma, A., and Sharma, D. K., (2022) Performance and stability enhancement of mixed dimensional bilayer inverted perovskite (BA2PbI4/MAPbI3) solar cell using drift-diffusion model, Sustainable Chemistry and Pharmacy, 29, 100807.
  10. Ortiz-Cervantes, C., Carmona-Monroy, P., and Solis-Ibarra, D., (2019) Two-dimensional halide perovskites in solar cells: 2D or not 2D, ChemSusChem, 12 (10), 1560.
  11. Han, B., Wang, Y., Liu, C., Sun, K., Yang, M., Xie, L., Yang, S., Meng, Y., Lin, S., Xu, P., Li, J., Qiu, Q., and Ge, Z., (2023) Rational design of ferroelectric 2D perovskite for improving the efficiency of flexible perovskite solar cells over 23%, Angewandte Chemie International Edition, 62, e202217526.
  12. Yang, W., Ding, B., Lin, Z., Sun, J., Meng, Y., Ding, Y., Sheng, J., Yang, Z., Ye, J., Dyson, P. J., and Nazeeruddin, M. K., (2023) Visualizing interfacial energy offset and defects in efficient 2D/3D heterojunction perovskite solar cells and modules, Advanced Materials, 35 (23), 2302071.
  13. Adihetty, N. L., Ratnasinghe, D. R., Attygalle, M. L. C., Narayan, S., and Jha, P. K., (2021) The effect of deep defects on the efficiency variation of CH3NH3PbI3 perovskite solar cells, In 2021 Moratuwa Engineering Research Conference (MERCon), 659-663, Moratuwa, Sri Lanka.
  14. Zhou, Y., Wang, F., Cao, Y., Wang, J. P., Fang, H. H., Loi, M. A., Zhao, N., and Wong, C. P., (2017) Benzylamine-treated wide-bandgap perovskite with high thermal-photostability and photovoltaic performance, Advanced Energy Materials, 7, 1701048.
  15. Dou, Q., Whatley, T., Syed, T., Wei, W., and Wang, H., (2022) Carbon nanomaterials–polymer composites for perovskite solar cells: preparation, properties and applications, Journal of Materials Chemistry A, 10 (37), 19211-19230.
  16. Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., and You, J., (2017) Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells, Nat Energy, 2, 16177.
  17. Zandi, S., Saxena, P., and Gorji, N. E., (2020) Numerical simulation of heat distribution in RGO-contacted perovskite solar cells using COMSOL, Solar Energy, 197, 105-110.
  18. Hima, A., Lakhdar, N., Benhaoua, B., Saadoune, A., Kemerchou, I., and Rogti, F., (2019) An optimized perovskite solar cell designs for high conversion efficiency, Superlattices and Microstructures, 129, 240-246.
  19. Hamri, Y. Z., Bourezig, Y., Medles, M., Ameri, M., Toumi, K., Ameri, I., Al-Douri, Y., and Voon, C. H., (2019) Improved efficiency of Cu (In, Ga) Se2 thin film solar cells using a buffer layer alternative to CdS, Solar Energy, 178, 150-156.
  20. Bag, A., Radhakrishnan, R., Nekovei, R., and Jeyakumar, R., (2020) Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation, Solar Energy, 196, 177-182.
  21. Burgelman, M., Nollet, P., and Degrave, S., (2000) Modelling polycrystalline semiconductor solar cells, Thin Solid Films, 361–362, 527-532.
  22. Meyer, E. L., Mvokwe, S. A., Oyedeji, O. O., Rono, N., & Agoro, M. A. (2025). Computational study of chalcogenide-based perovskite solar cell using SCAPS-1D numerical simulator. Materials, 18(1), 186.
  23. Brakkee, R., and Williams, M. R., (2020) Minimizing defect states in lead halide perovskite solar cell materials, Applied Sciences, 10, 3061.
  24. Khoshsirat, N., and Md Yunus, N. A., (2013) Numerical simulation of CIGS thin film solar cells using SCAPS-1D, In 2013 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (CSUDET), 63-67, Selangor, Malaysia.
  25. Gürlek, A. K., (2019) Performance characterization and SCAPS modeling of thin-film CdTe solar cell and mini-module photovoltaic devices produced by MOCVD (Doctoral dissertation, Çukurova University, Institute of Science, Department of Physics), p. 127, Adana, Türkiye.
  26. Mouchou, R. T., Jen, T. C., Laseinde, O. T., and Ukoba, K. O., (2021) Numerical simulation and optimization of p-NiO/n-TiO2 solar cell system using SCAPS, Materials Today: Proceedings, 38 (2), 835-841.
  27. Rahman, M. S., Miah, S., Marma, M. S. W., and Sabrina, T., (2019) Simulation-based investigation of inverted planar perovskite solar cell with all metal oxide inorganic transport layers, In 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), 1-6, Cox's Bazar, Bangladesh.
  28. Zhou, H., Chen, Q., Li, G., Luo, S., Song, T. B., Duan, H. S., Hong, Z., You, J., Liu, Y., and Yang, Y., (2014) Interface engineering of highly efficient perovskite solar cells, Science, 345, 542-546.
  29. Karthick, S., Boucle, J., and Velumani, S., (2021) Effect of bismuth iodide (BiI3) interfacial layer with different HTL’s in FAPI based perovskite solar cell-SCAPS-1D study, Sol. Energy, 218, 157-168.
  30. Jiang, Q., Zhang, X., and You, J., (2018) SnO2: a wonderful electron transport layer for perovskite solar cells, Small, 14 (31), 1801154.
  31. Ongül, F., (2024) Simulation of Inverted Planar Perovskite Solar Cell Using SCAPS-1D Software, Journal of Studies in Advanced Technologies, 2 (1), 64-73.
  32. Tress, W., (2017) Perovskite solar cells on the way to their radiative efficiency limit – Insights into a success story of high open-circuit voltage and low recombination, Journal of Physical Chemistry Letters, 8 (13), 3106-3116.
  33. Casas, G. A., Cappelletti, M. A., Cédola, A. P., Soucase, B. M., and Blancá, E. L. P., (2017) Analysis of the power conversion efficiency of perovskite solar cells with different materials as hole-transport layer by numerical simulations, Superlattices and Microstructures, 107, 136-143.
  34. Jayan, K. D., and Sebastian, V., (2021) Comprehensive device modelling and performance analysis of MASnI3 based perovskite solar cells with diverse ETM, HTM and back metal contacts, Solar Energy, 217, 40-48.
  35. Yadav, C., Kumar, M., Lodhi, K., and Kumar, S., (2023) Methyl ammonium iodide via novel PECVD process for the growth of 2-step vacuum based perovskite (MAPbI3) thin films, Materials Today Communications, 36, 106736.
  36. Lee, K. S., Kim, Y.-H., Kim, I. S., and Kim, E. K., (2023) Electrical properties and defect analysis of MAPbI3 thin films grown on TiO2 layer through a two-step drying process, Thin Solid Films, 782, 140018.
  37. Heo, S., Seo, G., Cho, K. T., Lee, Y., Paek, S., Kim, S., Seol, M., Kim, S. H., Yun, D. J., Kim, K., Park, J., Lee, J., Lechner, L., Rodgers, T., Chung, J. W., Kim, J. S., Lee, D., Choi, S. H., and Nazeeruddin, M. K., (2019) Dimensionally engineered perovskite heterostructure for photovoltaic and optoelectronic applications, Advanced Energy Materials, 9, 1902470.
  38. Siekmann, J., Ravishankar, S., and Kirchartz, T., (2021) Apparent defect densities in halide perovskite thin films and single crystals, ACS Energy Letters, 6 (9), 3244-3251.
  39. Borah, C. K., Borah, L. N., Hazarika, S., and Phukan, A., (2024) Modelling and analysis of a stable perovskite solar cell with modified hole transport layer and metal back contact, Renewable Energy, 190, 372-378.
  40. Jang, H. S., Han, M. K., Park, C. G., and Yang, D., (2021) The impact of defect density on the performance of perovskite solar cells: A computational study, Solar Energy Materials and Solar Cells, 224, 110912.
  41. Wang, X., Zhu, S., Tang, L., and Zhang, Y., (2023) Review of the influence of defect density and trap states on perovskite solar cell performance, Renewable and Sustainable Energy Reviews, 167, 112768.
  42. Tsai, H. S., Jeng, U. S., and Chou, L. J., (2016) Performance enhancement of perovskite solar cells using organic hole transport materials, Journal of Materials Chemistry A, 4 (47), 18640-18646.
  43. He, Y., Wang, X., Yang, Z., Zhang, Y., and Zhang, Y., (2020) Defect engineering in perovskite solar cells: Strategies and mechanisms, Materials Science and Engineering: R: Reports, 139, 100517.
  44. Ji, Y., Chen, X., and Yi, W., (2021) Defect physics and engineering of halide perovskites for efficient optoelectronic devices, Nature Communications, 12 (1), 1350.