Exploratory Study on the Properties of Compact Three-Roving Yarn: Comparison The Properties of Compact Spun, Compact Siro-Spun and Compact Three-Roving Yarns
In addition, it should also be noted that three-roving yarn can be also used for specific purposes owing to its composite structure.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:This study presents the novel compact three-roving technology which developed on the working principle of siro-spun and compact spinning technologies.
📊
Temel Bulgular & Veri:The properties of new compact three-roving yarns were compared with compact spun and compact siro-spun yarns that produced at the same yarn count and at the same twist level from natural, synthetic and regenerated fibers.
💡
Sonuç & Katkı:In addition, it should also be noted that three-roving yarn can be also used for specific purposes owing to its composite structure.
This study presents the novel compact three-roving technology which developed on the working principle of siro-spun and compact spinning technologies. In the study, auxiliary parts of siro-spun and pneumatic compact spinning are newly designed for the production of compact three-roving yarns. The properties of new compact three-roving yarns were compared with compact spun and compact siro-spun yarns that produced at the same yarn count and at the same twist level from natural, synthetic and regenerated fibers. Besides, three-types of yarns were also used in the weft direction for the production of the woven fabric. Comparing yarn and fabric properties showed that, compact three-roving yarns have similar results to commercially used yarns in general. In addition, it should also be noted that three-roving yarn can be also used for specific purposes owing to its composite structure.
Demir, M., Kılıç, M., Sayın, S., Kıral, Z., Balduk, F., Denge, K. K. (2024). Exploratory Study on the Properties of Compact Three-Roving Yarn: Comparison The Properties of Compact Spun, Compact Siro-Spun and Compact Three-Roving Yarns. Tekstil ve Konfeksiyon, Volume: 34 Issue: 1. https://doi.org/10.32710/tekstilvekonfeksiyon.1117792
Kilic M., Balci Kilic G., Okur A. 2011. Effects of Spinning System on Yarn Properties. Journal of Textiles and Engineer 18(81): 22-34.
Song, Y. 2016. Comparison between Conventional Ring Spinning and Compact Spinning, Master Thesis, North Carolina State University.
Soltani, P. & Johari, M.S. 2012. A study on siro-, solo-, compact-, and conventional ring-spun yarns. PartII: yarn strength with relation to physical and structural properties of yarns, The Journal of The Textile Institute, 103(9):921-930, DOI: 10.1080/00405000.2011.628117
Basal, G. & Oxenham, W. 2006. Comparison of Properties and Structures of Compact and Conventional Spun Yarns Textile Research Journal 76(7): 567–575 DOI: 10.1177/0040517506065591
Cheng, K.P.S. & YU, C. 2003. A study of Compact Spun Yarns. Textile Research Journal 73 (4): 345-349. DOI: 10.1177/004051750307300412
Ganesan S. & Ramakrishnan G. 2006. Fibre migration in compact spun yarns: Part I- Pneumatic compact Yarn. Indian Journal of Fibre &Textile Research 31: 381-386.
Altas, S. & Kadoglu, H. 2012 Comparison of Conventional Ring, Mechanical Compact and Pneumatic Compact Yarn Spinning Systems. Journal of Engineered Fibers and Fabrics 7(1).
Raja, D., Prakash, C., Gunasekaran G. & Koushik, C.V. 2015. A study on thermal properties of single-jersey knitted fabrics produced from ring and compact folded yarns, The Journal of The Textile Institute, 106:4, 359-365, DOI: 10.1080/00405000.2014.912783.
Akhtar, K.S., Ahmad, S., Afzal,A., Anam,W., Ali,Z. & Hussain, T. 2020. Influence and comparison of emerging techniques of yarn manufacturing on physical–mechanical properties of polyester-/cotton-blended yarns and their woven fabrics, The Journal of The Textile Institute 111(4): 555-564. DOI: 10.1080/00405000.2019.1650545
Kim, H. A. 2017. Physical properties of ring, compact, and air vortex yarns made of PTT/wool/modal and wearing comfort of their knitted fabrics for high emotional garments, The Journal of The Textile Institute 108(9):1647-1656. DOI: 10.1080/00405000.2016.1275444
Kaynak, H. K. & Celik, H.İ. 2018. Thermophysiological comfort and performance properties of knitted fabrics produced from different spinning technologies, The Journal of The Textile Institute 109(4):536-542, DOI: 10.1080/00405000.2017.1361080
Stalder, H. 2014. Rieter Manuel of Spinning, Issue 6: Alternative Spinning Technologies, Winterthur: Rieter Machine Works.
Emanuel A., Plate, D. 1982. Alternative Approach to Two-Fold Weaving Yarn, Part II. The Theoretical Model. The Journal of The Textile Institute 73 (3): 108-116. DOI: 73:3, 107-116, DOI: 10.1080/00405008208658923
Miao,M., Cai, Z., Zhang, Y. 1993. Influence of Machine Variables on Two-strand Yarn Spinning Geometry. Textile Research Journal 63 (2):116-120. DOI: 10.1177/004051759306300208
Cheng, K.P.S & Sun M.N. 1998. Effect of Strand Spacing and Twist Multiplier on Cotton Siro-Spun Yarn. Textile Research Journal 68 (7): 520-527. DOI: 10.1177/004051759806800709
Gokarneshan, N., Anbumani, N. & Subramaniam, V. 2007. Influence of strand spacing on the interfibre cohesion in siro yarns, The Journal of The Textile Institute, 98:3: 289-292, DOI: 10.1080/00405000701489313
Soltani P. & Johari, M.S. 2012. A study on siro-, solo-, compact-, and conventional ring-spun yarns. Part I: structural and migratory properties of the yarns, The Journal of The Textile Institute103(6): 622-628. DOI: 10.1080/00405000.2011.595567
Gowda, R.V. M., Sivakumar, M., Kannan, M. S. S. 2004. Influnce of process variables on characteristics of modal siro-spun yarns using Box-Behnken response surface design. Indian Journal of Fibre & Textile Research 29: 412-418.
Yıldız B. S. & Kilic, M. 2017. An Investigation on Properties of Siro-spun Yarns. Annals of University Oradea Fascicles of Textile and Leatherwork 18:131-136.
Ortlek, H.G., Kilic, G., Bilgin, S. 2011. Comparative study on the properties of yarns produced by modified ring spinning methods. Industria Textila 62(3):129-133.
Lui, Y., Wang, Y. & Gao, W. 2019. Wicking Behaviours Of Ring And Compact-Siro Ring Spun Yarns With Different Twists. AUTEX Research Journal, 19(1) DOI: 10.1515/aut-2018-0031
Su, X., Gao, W., Liu, X., Xie, C., Xu, B. 2015. Research on the Compact-Siro Spun Yarn Structure. FIBRES & TEXTILES in Eastern Europe 111(3): 54-57.
Matsumoto, M., Matsumoto, Y., Kanai, H., Wakako, L., Fukushima, K. 2014. Construction of Twin Staple-core Spun Yarn with two Points of Yarn Formation in One Twisting Process. Textile Research Journal 84(17):1858–1866. DOI: 10.1177/0040517513499435
Matsumoto, Y., Kanai, H., Wakako, L., Morooka, H., Kimura, H., Fukushima, K. 2010. Exploratory Work on the Spinning Condition of the Structure of Staple-core Twin-spun Yarns. Textile Research Journal 80(11): 1056–1064. DOI: 10.1177/0040517509352521
Matsumoto, Y., Kimura, H., Yamamoto, T., Matsuoko, T., Fukushima, K. 2009. Characteristics of Novel Triplet Spun Yarns made from Fibers of Differing Fineness. Textile Research Journal 79 (10): 947-952. DOI: 10.1177/0040517508097791
Demir, M. and Kilic, M. 2017. Investigating Possibilities of Three-Strand Yarn Production. Fibres and Textiles 24(1): 30-35.
Demir, M. and Kilic, M. 2020. Development of Three-roving Ring Yarn Production System, Indian Journal of Fibre & Textile Research 45: 450-456.
Demir, M., Kilic, M. 2019. A modified Twist spinning-three-roving Yarn Spinning. In: International Conference TexTeh IX Advanced Textiles for a Better World. Bucharest, Romania, 24-25 October 2019. 29. Demir M, 2021. Design and development of three strand Yarn Production System, PhD Thesis, Available from YOKSIS database (691009)
Demir, M., Kilic, M., Sayin, S., Kiral, Z., Balduk, F., & Denge, K. K. (2021). Design of three-strand compact spinning system and numerical flow-field simulation for different structures of air-suction guides and suction inserts. Textile Research Journal, 91(15-16), 1795-1814.
Martindale, J.G. 1945. A New Method of Measuring the Irregularity of Yarns with Some Observations on the Origin of Irregularities in Worsted Slivers and Yarns. Journal of Textile Institute 36(3): 35-47. DOI: 10.1080/19447024508659383
Grosberg, P. and Iype, C. 1999. Yarn Production – Theoretical Aspects. Cambridge: Woodhead Publishing
Dyson, E. 1974. Some Observations on Yarn Irregularity. Journal of Textile Institute. 65(4):215-217. DOI: 10.1080/00405007408630450
Hearle, J.W.S., Lord, P.R. and Senturk, N. 1972. Fibre Migration in Open-End- Spun Yarns. Journal of Textile Institute 63(11):605-617. DOI: 10.1080/00405007208630383
Hua, T., Tao, M.X., Cheng, K.P.S, Xu, B.G. 2010. Effects of Geometry of Ring Spinning Triangle on Yarn Torque: Part II: Distribution of Fiber Tension within a Yarn and Its Effects on Yarn Residual Torque. Textile Research Journal 80(2): 116–123 DOI: 10.1177/0040517509102732
Gupta, B. S. (Ed.) 2008. Friction in textile materials. Cambridge, UK: Woodhead Publishing
Pastore, C. M. &Kiekens, P. 2001. Surface characteristics of fibers and textiles. USA: Mercel Dekker Inc.Publishing Limited.
Kaynak, H.K., Babaarslan, O., Avcı, M.E, Doğan, F.B. 2017. Effects of spinning technology on deneim fabric performance. Industria Textila 68(3):197-203.
Ortlek, H.G., Kilic, G., Bilgin, S. 2011. Comparative study on the properties of yarns produced by modified ring spinning methods. Industria Textila 62(3):129-133.