Journals / Textile and Apparel / 2023 / Cilt: 33 Sayı: 3

The Production and Physical and Thermal Characterization of Polybutylene Succinate Multifilament Yarns

Pages
262–268
Publication Date
2023-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results suggested that the elongation (at Fmax) and dtex values decrease, and the tenacity value increases due to increasing winder speed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:There are significant problems in the production, use and waste management of petroleum-based polymers due to the increasing plastic waste problem, exceeding limit of the greenhouse gas emissions and decreasing fossil resources.
📊
Key Findings & Data:About 65% of the total yarn produced in the textile industry consists of yarns obtained from petroleum-based polymers.
💡
Conclusion & Impact:The results suggested that the elongation (at Fmax) and dtex values decrease, and the tenacity value increases due to increasing winder speed.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Biopolymers · polybutylene succinate (PBS) · melt spinning

Abstract

There are significant problems in the production, use and waste management of petroleum-based polymers due to the increasing plastic waste problem, exceeding limit of the greenhouse gas emissions and decreasing fossil resources. The textile sector is the second sector that causes the plastic waste problem after the packaging sector. About 65% of the total yarn produced in the textile industry consists of yarns obtained from petroleum-based polymers. Biopolymers come to the fore in studies carried out within the scope of sustainability philosophies such as using of renewable raw materials, recycling at the end of their life and decomposition without harming the nature. In this study, it is aimed to produce biobased and biodegradable polybutylene succinate (PBS) polymer into multifilament yarn by melt spinning method and examine the effect of different winder speeds on the textile values of PBS yarns. In this context, multifilament yarns with round cross-sections were produced at 4 various winder speeds. The linear density, elongation (at Fmax) and tenacity of the produced yarns were obtained by performing analyzes, and also cross-sectional images of the filaments were also taken. The results suggested that the elongation (at Fmax) and dtex values decrease, and the tenacity value increases due to increasing winder speed. Additionally, the cross-section properties of the PBS multifilament yarn are smooth round sections and that the filaments in a yarn have similar diameters to each other.

🔖

Cite This Article

KILINÇ, K., KARACA, E. (2023). The Production and Physical and Thermal Characterization of Polybutylene Succinate Multifilament Yarns. Textile and Apparel, Cilt: 33 Sayı: 3, 262–268. https://ajindex.com/articles/963362

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Niaounakis M. 2015. Definitions of Terms and Types of Biopolymers. Biopolymers: Applications and Trends, 1–90. I. Paris Agreement. 2015. United Nations Climate Change Conference. https://www.un.org/en/development/desa/population/migration/generalassembly/docs/globalcompact/FCCC_CP_2015_10_Add.1.pdf, 27.10.2021. Koncar V. 2019. Composites and hybrid structures. Smart Textiles for in SituMonitoring of Composites, 153–215.
  2. Mohanty AK, Misra M, Drzal LT. 2002. Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials World, Journal of Polymer Environment, 10, 19–26.
  3. Verma D, Fortunati E. 2019. Biopolymer processing and its composites: an introduction, Biomass, Biopolymer-Based Materials, and Bioenergy, 3–23.
  4. George A., Sanjay MR, Srisuk R, Parameswaranpillai J, Siengchin S. 2020. A Comprehensive Review On Chemical Properties And Applications Of Biopolymers And Their Composites, International Journal of Biological Macromolecules, 154, 329-338. Ashter SA. 2016.
  5. Overview of biodegradable polymers, Introduction to Bioplastics Engineering, 19–30.
  6. Zhu Y, Romain C, Williams C. 2016. Sustainable Polymers From Renewable Resources, Nature, 540, 354–362.
  7. Thoen J, Busch R, 2006. Industrial Chemicals from Biomass – Industrial Concepts, Biorefineries‐Industrial Processes and Products: Status Quo and Future Directions, Wiley-VCH, Weinheim, 347-365. European bioplastics conference, 2020. Bioplastics market developement update 2020, https://docs.european-bioplastics.org/conference/Report_Bioplastics_Market_Data_2020_short_version.pdf, 07.05.2021.
  8. Ritchie H, Roser M. 2018. Plastic Pollution. Published online at OurWorldInData.org. Retrieved from: 'https://ourworldindata.org/plastic-pollution', 02.03.2021. Iwata T. 2015. Biodegradable and bio-based polymers: Future prospects of eco-friendly plastics. Angew. Chem. Int. Ed. Engl., 54, 3210-3215. Sajn N. 2019. Environmental Impact of the Textile and Clothing Industry:What Consumers Need to Know, EPRS - European Parliamentary Research Service: European Union, 1-11. Mülhaupt R. 2013. Green polymer chemistry and bio-based plastics: dreams and reality, Macromol. Chem. Phys., 214, 159-174. Ziabicki A. 1976. Fundamentals of Fibre Formation: The Science of Fibre Spinning and Drawing. JohnWiley & Sons: Hoboken, NJ, USA. Fourné F. 1999. Synthetic Fibers: Machines and Equipment, Manufacture, Properties, Hanser, Munich, Germany. Reese G. 2003. Polyester Fibers: Fiber Formation and End-Use Applica