SavedAdd your journal

Journals / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2023 / Cilt: 11 Sayı: 2

The Implementation of Internal Mode Control Method to SEPIC Converter for Battery Charging Systems

Fatih Süleyman TAŞKINCAN
Ahmet KARAARSLAN
Zafer ORTATEPE
Pages
464–474
Publication Date
2023-06-23
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The performance of IMC method applied on SEPIC converter is detailed analyzed in terms of simulation studies that are obtained by using MATLAB/Simulink and experimental studies.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, internal model control (IMC) method, which is a model-based approach that offers more robust and better reference tracking capability than conventional controllers for the unstable process, is applied to the SEPIC converter used in battery charging system for military applications.
📊
Key Findings & Data:When a system is not based on a plant model, it is possible to encounter some problems such as dead time and non-linearity in controlling of the system.
💡
Conclusion & Impact:The performance of IMC method applied on SEPIC converter is detailed analyzed in terms of simulation studies that are obtained by using MATLAB/Simulink and experimental studies.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Internal model control (IMC) · battery charging system · SEPIC converter

Abstract

In this paper, internal model control (IMC) method, which is a model-based approach that offers more robust and better reference tracking capability than conventional controllers for the unstable process, is applied to the SEPIC converter used in battery charging system for military applications. When a system is not based on a plant model, it is possible to encounter some problems such as dead time and non-linearity in controlling of the system. The purpose of the SEPIC topology is to eliminate the disadvantage of other topologies such as Buck-Boost and Cúk converters that are used for similar applications in reversing the output voltage. In addition, a great amount of voltage and current stress on a component causes the power board to overheat in such converters and requires additional cooling equipment. These problems are not encountered in SEPIC topology. Also, this topology provides high efficiency, step-up/step-down voltage conversion, and excellent transient state response over a wide range. The performance of IMC method applied on SEPIC converter is detailed analyzed in terms of simulation studies that are obtained by using MATLAB/Simulink and experimental studies.

🔖

Cite This Article

TAŞKINCAN, F. S., KARAARSLAN, A., ORTATEPE, Z. (2023). The Implementation of Internal Mode Control Method to SEPIC Converter for Battery Charging Systems. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 11 Sayı: 2, 464–474. https://ajindex.com/articles/949510

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Massey R.P., Snyder E.C., High voltage single-ended DC/DC converter, IEEE Power Electronics Specialists Conference, (1977) 156-159
  2. Luo F.L., Ye H., Advanced DC/DC Converters, CRC Press, (2004) 55-60
  3. Roberts S., DC/DC Book of Knowledge Practical tips for the User (Third Ed.), (2016) 1-59
  4. Font J., Vicuña L. G., Guinjoan F., Majó J., Martinez L., A contribution to the analysis of the SEPIC converter, Proceedings of the IASTED Symposium Identification Modelling and Simulation, (1987) 355-358
  5. Vicuña L. G., Guinjoan F., Majó J., Martinez L., Discontinuous conduction mode in the SEPIC converter, MELECON '89: Mediterranean Electrotechnical Conference Proceedings. Integrating Research Industry and Education in Energy and Communication Engineering, (1989) 38-42
  6. Eng V., Pinsopon U., Bunlaksananusorn C., Modeling of a SEPIC converter operating in continuous conduction mode, 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, Pattaya, Chonburi, (2009) 136-139
  7. Jose R., Anisha S., Vani V., Kshemada D., DC-DC SEPIC converter topologies, International Journal of Research in Engineering and Technology, 04 No. 05 (2015) 20-23
  8. Bequette B. W., Nonlinear control of chemical processes: a review, Industrial &Engineering Chemistry Research, 30 (1991) 1391-1413
  9. Muhammad D., Ahmad Z., Aziz N., Implementation of internal model control (IMC) in continuous distillation column, Proc. of the 5th International Symposium on Design, Operation and Control of Chemical Processes, (2010) 812-821
  10. Garcia C. E., Morari M., Internal model control. A unifying review and some new results, Industrial & Engineering Chemistry Process Design and Development, 21 (1982) 308-323
  11. Morari M., Zafiriou E., Robust Process Control, Prentice Hall, (1989)
  12. Garcia C. E., Morari M., Internal model control 3. Multivariable Control Law Computation and Tuning Guidelines, Industrial & Engineering Chemistry Process Design and Development, 24 (1985) 484-494
  13. Tarakanath K., Patwardhan S., Agarwal V., Internal model control of dc-dc boost converter exhibiting non-minimum phase behavior, IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Bombay, India, (2014) 1-7
  14. Sun X., Shi Z., Chen L., Yang Z., Internal Model Control for a Bearingless Permanent Magnet Synchronous Motor Based on Inverse System Method, IEEE Transactions on Energy Conversion, 31 No.