Journals / Sakarya University Journal of Computer and Information Sciences / 2020 / Cilt: 3 Sayı: 1

Estimation of Permanent Magnet Synchronous Generator Performance with Artificial Neural Network Models

Sabit Mıknatıslı Senkron Generatör Performansının Yapay Sinir Ağı Modelleri ile Kestirimi

Pages
60–73
Publication Date
2020-04-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

For this purpose, performance parameters such as total magnet consumption, efficiency, power loss have been successfully estimated using single and double hidden layered multi layer neural network (MLNN), elman neural network (ENN) and radial basis function neural network (RBFNN).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The interest in renewable energy sources has grown with the increase of environmental pollution and the decrease of fossil fuels.
📊
Key Findings & Data:In this regard, wind energy, which is one of the renewable energy sources whose share in energy production increases day by day, emerges as a local and environmentally friendly solution.
💡
Conclusion & Impact:For this purpose, performance parameters such as total magnet consumption, efficiency, power loss have been successfully estimated using single and double hidden layered multi layer neural network (MLNN), elman neural network (ENN) and radial basis function neural network (RBFNN).
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:çok katmanlı sinir ağı · elman sinir ağı · radyal tabanlı fonksiyon sinir ağı

Abstract

The interest in renewable energy sources has grown with the increase of environmental pollution and the decrease of fossil fuels. It is possible to provide energy supply security and diversity by using renewable energy sources. In this regard, wind energy, which is one of the renewable energy sources whose share in energy production increases day by day, emerges as a local and environmentally friendly solution. Many different types of generators are used in wind turbines and these have advantages and disadvantages according to each other. Permanent magnet synchronous generators (PMSG) are preferred because of their advantages such as high efficiency, high power density and being used directly in wind turbines without the need for gear system. In this study, the performance of the 2,5 kW PMSG, with a 14-pole surface placement, internal rotor, suitable for use in wind turbines, has been examined by changing the physical structure of the magnet. For this purpose, performance parameters such as total magnet consumption, efficiency, power loss have been successfully estimated using single and double hidden layered multi layer neural network (MLNN), elman neural network (ENN) and radial basis function neural network (RBFNN).

Özet

Çevre kirliliğinin artması ve fosil yakıtların azalması ile yenilenebilir enerji kaynaklarına ilgi artmıştır. Yenilenebilir enerji kaynaklarını kullanarak enerji arz güvenliğini ve çeşitliliğini sağlamak mümkündür. Bu bağlamda, enerji üretiminde payı her geçen gün artan yenilenebilir enerji kaynaklarından biri olan rüzgâr enerjisi, yerel ve çevre dostu bir çözüm olarak ortaya çıkmaktadır. Rüzgâr türbinlerinde birçok farklı tipte jeneratör kullanılmaktadır ve bunlar birbirlerine göre avantaj ve dezavantajlara sahiptir. Sabit mıknatıslı senkron generatörler (SMSG) yüksek verim, yüksek güç yoğunluğu ve dişli sistemine gerek olmadan direkt olarak rüzgâr türbinlerinde kullanılma gibi avantajlarından dolayı tercih edilmektedirler. Bu çalışmada, rüzgâr türbinlerinde kullanıma uygun 14-kutuplu yüzey yerleştirmeli, içten rotorlu, 2,5 kW SMSG’nin performansı mıknatısın fiziksel yapısı değiştirilerek incelenmiştir. Bu amaçla toplam kullanılan mıknatıs miktarı, verim, güç kaybı gibi performans parametreleri tek ve iki gizli katmana sahip çok katmanlı sinir ağı (MLNN), elman sinir ağı (ENN) ve radyal tabanlı fonksiyon sinir ağı (RBFNN) kullanılarak başarılı bir şekilde kestirilmiştir.

🔖

Cite This Article

ÇETİN, O., DALCALI, A., TEMURTAŞ, F. (2020). Estimation of Permanent Magnet Synchronous Generator Performance with Artificial Neural Network Models. Sakarya University Journal of Computer and Information Sciences, Cilt: 3 Sayı: 1, 60–73. https://ajindex.com/articles/946696

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. V. Khare, S. Nema, and P. Baredar, “Solar–wind hybrid renewable energy system: A review”, Renewable and Sustainable Energy Reviews, vol. 58, pp. 23-33, 2016
  2. E. Delihasanlar, E. K. Yaylacı and A. Dalcalı, “Solar Energy potential in the world and Turkey, current status, incentives, installation cost analysis-Karabuk province sample”, Electronic Letters on Science & Engineering, vol. 15, no. 1, pp. 12-20, 2019. [3] “Elektrik üretim iletim istatistikleri raporu”, [Online]. https://www.teias.gov.tr/tr-TR/turkiye-elektrik-uretim-iletim-istatistikleri. [Erişim: 10.04.2020]. [4] “Gerçek zamanlı üretim”, [Online]. https://seffaflik.epias.com.tr/transparency/uretim/gerceklesen-uretim/gercek-zamanli-uretim.xhtml. [Erişim: 10.04.2020]
  3. H. Polinder, F.F.A. van der Pijl, G.J. de Vilder and P. Tavner, “Comparison of direct-drive and geared generator concepts for wind turbines”, Proc. International Conference on Electric Machines and Drives, 2005, pp. 543-550
  4. O, Lyan, V. Jankunas, E. Guseınoviene, A. Pasilis, A. Senulis, A. Knolis and E Kurt, “Exploration of a permanent magnet synchronous generator with compensated reactance windings in parallel rod configuration”, Journal of Electronic Materials, pp. 1-7, 2018
  5. A. Dalcalı, E. Kurt, E. Çelik and N. Öztürk, “Cogging Torque Minimization Using Skewed and Separated Magnet Geometries”, Journal of Polytechnic, vol. 23, no. 1, pp. 223-230, 2020
  6. A. Dalcalı, M. Akbaba, “Optimum pole arc offset in permanent magnet synchronous generators for obtaining lowest voltage harmonics”, Scientia Iranica D, vol. 24, no. 6, pp. 3223-3230, 2017
  7. K.M. Vishnu Murthy, Computer-Aided Design of Electrical Machines. BS Publications, Hyderabad, 2008
  8. G. Lee, S. Min and J.P. Hong, “Optimal Shape design of rotor slot in squirrel-cage induction motor considering torque characteristics”, IEEE Transactions on Magnetics, vol.49, no.5, pp. 2197-2200, 2013
  9. A. Dalcalı, M. Akbaba, “Comparison of 2D and 3D magnetic field analysis of single-phase shaded pole induction motors”, Engineering Science and Technology, an International Journal, vol.19, no. 1, pp. 1-7, 2016
  10. S.L. Ho and W.N. Fu, “Review and future application of finite element methods in induction motors,” Electric Machines & Power Systems, vol. 26, no. 2, pp. 111-125, 1998
  11. M. Akbaba and S. Q. Fakhro, "An ımproved computational technique of the inductance parameters of the reluctance augmented shaded-pole motors using finite element method," IEEE Trans