Journals / Textile and Apparel / 2008 / Cilt: 18 Sayı: 1

INVESTIGATION OF THE CHANGES OCCURRED IN THE INNER STRUCTURE OF WET SPUN ACRYLIC FIBERS BY USING X-RAY DIFFRACTION METHOD ON THE FIBER PRODUCTION STAGES

YAŞ ÇEKİM YÖNTEMİYLE AKRİLİK LİF ÜRETİM SAFHALARINDA LİF İÇYAPISINDA MEYDANA GELEN DEĞİŞİKLİKLERİN GENİŞ AÇI X-IŞINI DİFRAKSİYONU İLE İNCELENMESİ

Pages
15–22
Publication Date
2008-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

During the production of polyacrylonitrile fibers by using wet spinning method, the changes occurred in the inner structure of fibers were researched by investigation of their x-ray diffraction graphics

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Acrylic fibers are the most useful fibers among the synthetic fibers in textile applications.
📊
Key Findings & Data:The properties of synthetic fibers are affected by several production parameters.
💡
Conclusion & Impact:During the production of polyacrylonitrile fibers by using wet spinning method, the changes occurred in the inner structure of fibers were researched by investigation of their x-ray diffraction graphics
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Poliakrilonitril · Yaş çekim yöntemi · Akrilik lifi üretim basamakları

Abstract

Acrylic fibers are the most useful fibers among the synthetic fibers in textile applications. The properties of synthetic fibers are affected by several production parameters. In this paper, the production of wet spun acrylic fibers from poly (acrylonitrile / vinyl acetate) copolymers was performed with a dimethyl acetamide (DMAc) / water coagulation bath. During wet spinning of acrylic fibers, fiber samples are taken from each fiber production stage. X-ray diffraction graphics of these fiber samples are obtained by wide angle xray diffraction instrument. During the production of polyacrylonitrile fibers by using wet spinning method, the changes occurred in the inner structure of fibers were researched by investigation of their x-ray diffraction graphics

Özet

Akrilik lifleri tekstil uygulamalarındaki en kullanışlı sentetik lifler arasında yer almaktadır. Sentetik liflerin özellikleri üretim esnasındaki birçok üretim parametresinden etkilenmektedir. Bu çalışmada Poli (akrilonitril / vinil asetat) kopolimerlerinden oluşan akrilik lifleri dimetil asetamid (DMAc) / su’dan oluşan koagülasyon banyosunda yaş çekim yöntemi kullanılarak üretilmiştir. Akrilik liflerinin yaş çekim yöntemi ile üretimi esnasında her üretim basamağından ayrı ayrı lif numuneleri alınmıştır. Geniş açı x-ışını difraksiyonu cihazı kullanılarak üretim basamaklarından alınan bu akrilik lif numunelerinin geniş açı x-ışını difraksiyon grafikleri elde edilmiştir. Elde edilen geniş açı x-ışını difraksiyonu grafikleri incelenerek yaş çekim yöntemi ile poliakrilonitril lif üretiminde işlem basamaklarında liflerin içyapılarında meydana gelen değişiklikler araştırılmaya çalışılmıştır

🔖

Cite This Article

TİYEK, İ., BOZDOĞAN, F. (2008). INVESTIGATION OF THE CHANGES OCCURRED IN THE INNER STRUCTURE OF WET SPUN ACRYLIC FIBERS BY USING X-RAY DIFFRACTION METHOD ON THE FIBER PRODUCTION STAGES. Textile and Apparel, Cilt: 18 Sayı: 1, 15–22. https://ajindex.com/articles/943983

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Seventekin, N., 2001, Kimyasal Lifler, E.Ü. Tekstil ve Konf. Arş. Uyg. Merkezi Yayınları, İzmir
  2. Bahrami, S.H., Bajaj, P., and Sen, K., (2003), “Effect of Coagulation Conditions on Properties of Poly(acrylonitrile / carboxylic acid) Fibers”, Journal of Applied Polymer Science, Cilt: 89, s: 1825-1832
  3. Bozdoğan, F., Karacan, İ. and Tiyek, İ., 2004, Characterisation of Structure and Properties of A Selection of Polyacrylonitrile (PAN)– Based Acrylic Fibers Produced In Turkey, E.Ü. Tekstil ve Konfeksiyon Araştırma – Uygulama Merkezi Yayınları, ISBN: 975-483-636-1, İzmir, 81p
  4. BISFA., 2000, “Terminology of ManMade Fibres”, The International Bureau for the Standardisation of ManMade Fibres, 2000 Edition (replaces the 1994 edition), Brussels-Belgium, 84s
  5. Capone, G.J., 1995, “Wet Spinning Technology”, s: 69–103, Acrylic Fiber Technology and Applications, Mason, J.C. (Ed.), Marcel Dekker Inc., New York, 388p
  6. Frushor, B.G. and Knorr, R.S., 1985, “Acrylic Fibres”, 171–370, Handbook of Fiber Science and Technology: Volume IV: Fiber Chemistry, Lewin, M. and Pearce, E.M. (Eds.), Marcel Dekker Inc., New York, 1090p
  7. Tiyek, İ. ve Bozdoğan, F., 2005, “Akrilik lif üretiminde koagülasyon banyosunun önemi”, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 11, Sayı: 3, ISSN: 1300- 7009, sf.: 319-323
  8. Bach, H.C., and Knorr, R.S., 1990, “Acrylic Fibres”, Polymers: Fibres and Textiles, A Compendium, Ed.: Kroschwitz, Jacqueline, I., Wiley Interscience Publication, New York
  9. Tiyek, İ. ve Bozdoğan, F., 2006, “Koagülasyon Banyo sıcaklığının Akrilik Liflerinin Mikroskobik Görünü- müne Etkisinin İncelenmesi”, Tekstil ve Konfeksiyon, Yıl: 16, Sayı: 4, Ekim – Aralık, sf.: 251 – 257
  10. Bozdoğan, F., 1999, “Akrilik Liflerinin İç Yapısının Moleküler Modellemesi Üzerine Bir Araştırma”, Tekstil ve Konfeksiyon, Sayı:1., s: 11-14
  11. Wade, B. And Knorr, R., 1995, “Polymerization”, 37–68, Acrylic Fiber Technology and Applications, Mason, J.C. (Ed.), Marcel Dekker Inc., New York, 388p
  12. Bajaj, P., Sreekumar, T.V. and Sen, K., 2002, “Structure Development during Dry-Jet-Wet Spinning of Acrylonitrile / Vinyl Acids and Acrylonitrile / Methyl Acrylate Copolymers”, Journal of Applied Polymer Science, Cilt: 86, s: 773-778
  13. Clark G.I., 1967, “Chapter I: Properties of X-Rays”, s: I-3–I-31, Handbook of X–Rays, Emmitt, F.K. (Ed.), McGrawHill Book Company, New York, 1031s
  14. Kızılyallı, M., 1988, “Bölüm 3: X–Işınları Spektroskopisi”, Atomik Spektroskopi, Ö