Journals / Textile and Apparel / 2011 / Cilt: 21 Sayı: 2

THERMAL CONDUCTIVITY AND ACOUSTIC PROPERTIES OF NATURAL FIBER MIXED POLYURETHANE COMPOSITES

DOĞAL ELYAF KARIŞIMLI POLİÜRETAN KOMPOZİTLERİN SES VE ISI YALITIM ÖZELLİKLERİNİN İNCELENMESİ

Pages
124–132
Publication Date
2011-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The best thermal conductivity value was observed with a composite including 4% cotton fiber

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Natural cotton, bamboo and wool fibers were used as reinforcement agents in a polyurethane-based matrix to improve the sound absorption and thermal conductivity properties of the composite.
📊
Key Findings & Data:At higher frequencies, increasing the bamboo or wool fiber content decreases the sound absorption coefficient for the composite.
💡
Conclusion & Impact:The best thermal conductivity value was observed with a composite including 4% cotton fiber
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Poliüretan · Ses yalıtımı · Isıl özellikler

Abstract

Natural cotton, bamboo and wool fibers were used as reinforcement agents in a polyurethane-based matrix to improve the sound absorption and thermal conductivity properties of the composite. Generally, adding cotton, bamboo or wool fibers to polyurethane foam, improves its sound absorption coefficient. In this study, cotton fibers were observed to provide the best sound absorption coefficient. At higher frequencies, increasing the bamboo or wool fiber content decreases the sound absorption coefficient for the composite. Adding cotton, wool or bamboo fibers to polyurethane foam does not result in a significant change in the thermal conductivity of the material. The best thermal conductivity value was observed with a composite including 4% cotton fiber

Özet

Bir kompozitin ses yutum ve ısı yalıtım özelliklerini iyileştirmek amacıyla poliüretan esaslı bir matrise doğal pamuk, bambu ve yün elyaf katılmıştır. Bu çalışmanın arkasındaki hedeflerden biri de tekstil atıklarının değerlendirilmesi ve malzeme üretiminde daha az poliüretan kullanılmasıdır. Genel olarak bakıldığında, doğal elyaf ilavesi, poliüretan köpüğün ses yalıtım özelliğini iyileştirmektedir. Yapılan deneylerde, pamuk elyaf destekli poliüretan kompozitin en iyi ses yutum katsayısı değerlerini verdiği gözlenmiştir. Poliüretan köpüğe katılan bambu ve yün elyaf oranlarının arttırılması, kompozitin yüksek frekanslardaki ses yutum katsayı değerlerini azaltmaktadır. Poliüretan köpük içerisine pamuk, bambu veya yün elyaf katılması ısıl özelliklerde kayda değer bir değişim oluşturmamaktadır. En iyi ısıl iletkenlik özelliği %4 pamuk elyaf içeren kompozit için gözlenmiştir

🔖

Cite This Article

BÜYÜKAKINCI, B. Y., SÖKMEN, N., KÜÇÜK, H. (2011). THERMAL CONDUCTIVITY AND ACOUSTIC PROPERTIES OF NATURAL FIBER MIXED POLYURETHANE COMPOSITES. Textile and Apparel, Cilt: 21 Sayı: 2, 124–132. https://ajindex.com/articles/943824

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Verdejo R, Stampfli R, Alvarez-Lainez M, Mourad S, Rodriguez-Perez MA, Bruhwiler PA Shaffer M., 2009, “Enhanced acoustic damping in flexible polyurethane foams filled with carbon nanotubes”, Compos Sci Technol, 69(10):1564-1569
  2. Chen CH, Ma CCM, 1992, “Pultruded fibre reinforced polyurethane composites I. process feasibility and morphology”, Compos Sci Technol, 45(4): 335-344
  3. Chen CH, Ma CCM, 1992, “Pultruded fibre reinforced blocked polyurethane (PU) composites II. Processing variables and dynamic mechanical properties”, J Appl Polym Sci, 46(6): 949-957
  4. Chen CH, Ma CCM., 1994, “Pultruded fibre-reinforced polyurethane composites. III. Static mechanical, thermal, and dynamic mechanical properties”, Compos Sci Technol, 52(3): 427-432
  5. Vaikhanksi L, Nutt SR., 2003, “Synthesis of composite foam from thermoplastic “microspheres and 3D long fibers”, Compos A Appl Sci Manuf, 34(8):755-763
  6. Vaikhanksi L, Nutt SR., 2003, “Fiber reinforced composite foam from expandable PVC Microspheres”, Compos A Appl Sci Manuf, 34(12):1245-1253
  7. Chen W, Tao X, Liu Y., 2006, “Carbon Nanotube-Reinforced Polyurethane Composite Fibers”, Compos Sci Technol, 66(15):3029-3034
  8. Xiong J, Zheng Z, Song W, Zhou D, Wang X., 2008, “Microstructure and properties of polyurethane nanocomposites reinforced with methylene-bis-orthochloroanilline-grafted multi-walled carbon nanotubes”, Compos A Appl Sci Manuf, 39(5): 904–910
  9. Yang ZG, Zhao B, Qin SL, Hu ZF, Jin ZK, Wang JH., 2004, “Study on the mechanical properties of hybrid reinforced rigid polyurethane composite foam”, J Appl Polym Sci, 92(3):1493-1500
  10. Saliba CC, Oréfice RL, Carneiro JRG, Duarte AK, Schneider WT. Fernandes MRF, 2005, “Effect of the incorporation of a novel natural inorganic short fiber on the properties of polyurethane composites”, Polym Test, 24(7): 819-824. 11. de Mello D, Pezzin, SH, Amico SC, 2009, “The effect of post-consumer PET particles on the performance of flexible polyurethane foams”, Polym Test; 28(7): 702-708
  11. Saint-Michel F, Chazeau L, Cavaille JY., 2006, “Mechanical properties of high density polyurethane foams: II. Effect of the filler size”, Compos Sci Technol, 66(15): 2709–2718
  12. KUCEROVA Z, ZAJİCKOVA L, BURSİKOVA V, KUDRLE V, ELİAS M, JASEK O, SYNEK P, MATEJKOVA J, BURSİK J., 2009, “MECHANİCAL AND MİCROWAVE ABSORBİNG PROPERTİES OF CARBON-FİLLED POLYURETHANE”, MİCRON, 40(1):70-73
  13. Vaidya AS, Vaidya UK, Udin N., 2008, “Impact response of three-dimensional multifunction