Journals / Textile and Apparel / 2014 / Cilt: 24 Sayı: 2

A RESEARCH ON THE EFFECT OF METHOD STUDY ON PRODUCTION VOLUME AND ASSEMBLY LINE EFFECIENCY

METOT ANALİZİNİN ÜRETİM HACMİ VE MONTAJ HATTI VERİMLİLİĞİNE ETKİSİNİN ARAŞTIRILMASI

Pages
228–239
Publication Date
2014-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The aim of this research is to analyze the effects of method study on production volume and assembly line efficiency and to indicate the importance of method studies

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Method study which is one of the two basic elements of work study is the most effective methods that are used to produce more effectively with current machines and labor without any need for investment.
📊
Key Findings & Data:In this research, the operations in blouse sewing line are analyzed critically and the results of method study which is applied on four operations are investigated.
💡
Conclusion & Impact:The aim of this research is to analyze the effects of method study on production volume and assembly line efficiency and to indicate the importance of method studies
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Metot analizi · İş ölçümü · Verimlilik

Abstract

Method study which is one of the two basic elements of work study is the most effective methods that are used to produce more effectively with current machines and labor without any need for investment. In this research, the operations in blouse sewing line are analyzed critically and the results of method study which is applied on four operations are investigated. Following that, assembly line balancing is conducted by using Ranked Positional Weight Method considering operation durations which are obtained from method study and current operation times. The aim of this research is to analyze the effects of method study on production volume and assembly line efficiency and to indicate the importance of method studies

Özet

İş etüdünün iki temel bileşeninden biri olan metot analizi, özellikle mevcut işgücü ve makinelerle, herhangi bir yatırıma ihtiyaç duyulmaksızın daha verimli üretimin gerçekleştirilebilmesi için uygulanan en etkili yöntemlerden birisidir. Bu çalışmada bluz dikim bandında gerçekleştirilen operasyonlar eleştirel bir gözle incelenmiş ve 4 operasyon üzerinde yapılan metot analizi çalışmalarının sonuçları verilmiştir. Daha sonra mevcut durumdaki operasyon süreleri ile metot analizi çalışmaları sonucunda elde edilen operasyon süreleri dikkate alınarak Konum Ağırlık Yöntemi ile montaj hattı dengelemesi yapılmıştır. Bu çalışmanın amacı, metot analizinin üretim hacmi ve montaj hattı verimliliği üzerine etkisini incelemek ve metot analizi çalışmalarının önemine vurgu yapmaktır

🔖

Cite This Article

KAYAR, M., AKALIN, M. (2014). A RESEARCH ON THE EFFECT OF METHOD STUDY ON PRODUCTION VOLUME AND ASSEMBLY LINE EFFECIENCY. Textile and Apparel, Cilt: 24 Sayı: 2, 228–239. https://ajindex.com/articles/943769

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Prokopenko J., 1992, “Productivity: Concept and Definition”, Productivity Management: A Practical Handbook, 2. Edition, International Labour Office, Geneva, Switzerland, pp. 19-22
  2. Tadesse, A., 2011, “Design of Productivity Improvement Method for Ethiopian Garment Industries”, MSc Thesis, Addis Ababa University, Ethiopia, pp. 114
  3. Kayar, M., 2012, “Verimlilik ile İlgili Temel Kavramlar”, Üretim ve Verimlilik – Temel Esaslar ve Uygulama”, Ekin Press, Bursa, Turkey, pp. 44-48
  4. Eryürük, S.H., 2005, “Bir Konfeksiyon İşletmesinde Montaj Hattı Dengeleme”, MSc Thesis, Istanbul Technical University, İstanbul, Türkiye, pp. 84 – 89
  5. Kayar M., 2008, “Hazır Giyim İşletmelerinde Verimsizliği Ortaya Çıkaran Nedenlerin Araştırılması Ve Bunların Çözümüne Yönelik Alan Çalışması”, PhD Thesis, University of Marmara, İstanbul, Turkey, pp. 39-40
  6. Shri B.P., 1969, “Introduction”, Method Study, Guide, National -Productivity Council, New Delhi, India, pp. 1
  7. Bhattacharyya, D.K., 2006, “Job Analysis, Description and Job Evaluation”, Human Resource Planning, 2nd Edition, Excel Books, New Delhi, pp. 169
  8. Kanawaty, G., 1992, “Work Study”, Introduction to Work Study, 4th Edition, International Labour Office, Geneva, pp. 43-250
  9. Murthy, P.R., 2005, “Work Study”, Production and Operations Management, 2nd Edition, New Age International Publishers, New Delhi, pp. 302-303
  10. Thomas, R., 2013, “10 Steps to Improve Productivity”, Methods Workshop, Methods Apparel Consultancy India Pvt. Ltd. 11(http://www.methodsapparel.com/download/10%20steps%20to%20improve%20productivity.pdf – Date accessed: 08.12.2013
  11. Liker, J. K. and Meier, D., 2006, “Create Initial Process Stability”, The Toyota Way - Fieldbook”, 1st Edition, McGraw-Hill, USA, pp. 82-109
  12. Wild, R., 2003, “Work and Work Systems”, Operations Management, 6th Edition, Thomson Learning, Great Britannia, pp. 190-206
  13. Pennathur, K., 1967, A Manual of Method Study, 2nd Edition, National Productivity Council, India, pp. 214
  14. Islama, M., Hossainb, M. and Islamb, A., 2012, “A Comparative Method Study for Printing Time Reduction in Knitwear Manufacturing Company in Bangladesh: A Case Study”, World Journal of Social Science, Vol
  15. , Special Issue. pp. 218 – 224
  16. Top, A., 2001, Üretim Sistemleri Analiz, Planlama ve Kontrolü, 3. Baskı, Alfa Yayınları, İstanbul, Türkiye, pp. 45-54
  17. Mayank D.S., Shah S.K., Patel S.B. et al., 2012, “To Improve Productivity By Using Work Study & Design A Fixture