Journals / Textile and Apparel / 2016 / Cilt: 26 Sayı: 1

EVALUATING AND DEFINING BODY MEASUREMENTS ACCORDING TO ANTHROPOMETRIC MEASUREMENT TECHNIQUE FOR LOWER GARMENT PATTERN PREPARATION

VÜCUT ALTI GİYSİ KALIBI HAZIRLIĞINDA KULLANILAN ÖLÇÜLERİN ANTROPOMETRİK ÖLÇÜM TEKNİĞİNE GÖRE TANIMLANMASI

Pages
109–116
Publication Date
2016-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

An implementation which shows the necessity for using the newly defined measurements is conducted in this study

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In apparel industry, preparing garment patterns accurately is one of the most important factors in the production of fit garments.
📊
Key Findings & Data:While body measurements are being taken, it is necessary to use the anthropometrical measurement technique which represents the human body in numerical units.Within the scope of this study, the Contec, Müller, Metric and Basic Blocks Pattern Preparing Systems, which are widely used, are examined and the measurements, which are required for lower body basic pattern preparation, are determined.
💡
Conclusion & Impact:An implementation which shows the necessity for using the newly defined measurements is conducted in this study
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Vücut ölçüleri · Antropometrik Ölçüm Yöntemi · Giysi kalıbı

Abstract

In apparel industry, preparing garment patterns accurately is one of the most important factors in the production of fit garments. While body measurements are being taken, it is necessary to use the anthropometrical measurement technique which represents the human body in numerical units.Within the scope of this study, the Contec, Müller, Metric and Basic Blocks Pattern Preparing Systems, which are widely used, are examined and the measurements, which are required for lower body basic pattern preparation, are determined. These measurements’ definitions are stated according to anthropometric measurement technique. Besides, new anthropometric points for two measurements, which are not defined in anthropometric technique, are defined. It is thought that these newly defined measurements will be used in preparation of lower garment pattern effectively. An implementation which shows the necessity for using the newly defined measurements is conducted in this study

Özet

Hazır giyim sanayinde, vücuda iyi uyum sağlayan giysilerin üretiminde en önemli faktörlerden biri giysi kalıbının doğru hazırlanmasıdır. Vücut ölçülerinin elde edilmesinde, insanın beden şeklini sayısal olarak ifade eden antropometrik ölçüm tekniğinden yararlanılması gerekmektedir. Bu çalışma kapsamında; dünya kapsamında yaygın olarak kullanılan Contec, Metrik, Müller ve Temel Bloklar Kalıp Hazırlama Sistemleri incelenmiş ve alt beden giysi temel kalıplarının hazırlığında gerekli olduğu düşünülen ölçüler belirlenmiştir. Bu ölçülerin tanımları, antropometrik ölçüm tekniği açısından değerlendirilmiştir. Ayrıca antropometrik ölçüm yöntemine göre tanımı olmayan iki ölçü için antropometrik ölçü noktaları tanımlanmıştır. Çalışmanın uygulama bölümünde ise yeni tanımlanan ölçülerin gerekliliği gösterilmiştir

🔖

Cite This Article

KILIC, A. S., ÖNDOGAN, Z. (2016). EVALUATING AND DEFINING BODY MEASUREMENTS ACCORDING TO ANTHROPOMETRIC MEASUREMENT TECHNIQUE FOR LOWER GARMENT PATTERN PREPARATION. Textile and Apparel, Cilt: 26 Sayı: 1, 109–116. https://ajindex.com/articles/943686

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Bye E., Labat K.L., Delong M.R., 2006, “Analysis of Body Measurement Systems for Apparel”, Clothing and Textiles Research Journal, March 2006, vol. 24 no. 2 66-79 2. Hung, P. C., Witana, C. P., & Goonetilleke, R. S., 2004, “Anthropometric Measurements from Photographic Images”, Human Performance Laboratory, Hong Kong./ http://www.researchgate.net/publication/252610176 3. Akın, G., Gültekin, T. and Bektaş, Y., 2004, Üniversite Öğrencilerinde Bazı Antropometrik Boyutların Tespiti, 10. Ergonomics Congress, 7-9 October 2004,
  2. Bursa, Turkey. 4. Akın, G., 2001,
  3. Antropometri ve Ergonomi, Ankara, Turkey, pp:7. 5. Ercan, E., 1994, “Türk Bayan Ölçülerine Dayalı Yeni Bir Giysi Kalıp Çizim Sisteminin Geliştirilmesi”, Ph.D. Thesis, Ege University, Institute of Science, Izmir, Turkey, pp.250. 6. Su, B.A., 2001, “Ergonomi”, Ankara, Turkey. 7. Muehlenbein, M.P., 2010, “Human Evolutionary Biology”, Cambridge University, pp.92. 8. Weiner, J.S. and Lourie, J.A., 1969, “In Human Biology: A Guide to Field Methods. I.B.P. Handbook”, No. 9; Oxford:Blackwell Scientific Publications. 9. Kılıç, A., 2011, Antropometrik Ölçüm SistemindenYararlanarak Kadınlara Yönelik Yeni Bir Etek ve Pantolon Giysi Kalıbı Hazırlama Yönteminin Geliştirilmesi, Ph.D. Thesis, Ege University, Institute of Science, Izmir, Turkey, pp. 97,105,106,184. 10. Detering, U. and Schierling, R., 2003, Contec Giyim Konstrüksiyonu Bayan Üst Giysi, Mönchengladbach. 11. Krolopp, L., 1996, Schnittkonstruktionen für Röcke und Hosen: System M. Müller und Sohn; München Deutsche Bekleidungs-Akademie, 23. Verlage, München, 183s.