Journals / Textile and Apparel / 2018 / Cilt: 28 Sayı: 1

EFFECT OF FIBRE CONTENT ON THE MECHANICAL PROPERTIES OF BASALT FIBRE REINFORCED POLYLACTIC ACID (PLA) COMPOSITES

ELYAF ORANININ BAZALT ELYAF TAKVİYELİ POLİLAKTİK ASİT (PLA) KOMPOZİTLERİN MEKANİK ÖZELLİKLERİ ÜZERİNE ETKİSİ

Pages
66–71
Publication Date
2018-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results indicated that the density of the composite materials increase with the increasing of the content of basalt fibres.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A widespread use of composite materials leads researchers to search for sustainable raw materials.
📊
Key Findings & Data:The chopped basalt fibres with the length of 3 mm were also used as natural inorganic fibre source to reinforce PLA matrices obtained natural resources with the different contents until 50% by weight.
💡
Conclusion & Impact:The results indicated that the density of the composite materials increase with the increasing of the content of basalt fibres.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Bazalt elyaf · Polilaktik asit · Kompozit

Abstract

A widespread use of composite materials leads researchers to search for sustainable raw materials. In the present work, a sustainable thermoplastic polylactic acid (PLA) based composite materials were aimed to produce by extrusion followed with compression moulding method. The chopped basalt fibres with the length of 3 mm were also used as natural inorganic fibre source to reinforce PLA matrices obtained natural resources with the different contents until 50% by weight. Composite pellets were manufactured by a single screw extruder and followed composite panels were manufactured in the hot compression moulding machine. All of the composite samples were experimented to density, tensile, bending and impact tests. The results indicated that the density of the composite materials increase with the increasing of the content of basalt fibres. Besides, the increment of fibre content and about 180% increase compare to pure PLAlinearly enhanced the tensile and flexural modulus of composite materials. As a result of statistical evaluation, basalt fibre reinforcedPLA composites at fibre content of45 wt% were found to have significant difference among other fibre contents and had highest tensile, flexural and impact strength results of 53.73 MPa, 118 MPa and 1.49 kJ/m2, respectively.

Özet

Kompozit malzemelerin yaygın kullanımı araştırmacıları bu alanda kullanılacak sürdürülebilir hammaddeler üzerinde araştırma yapmaya yöneltmektedir. Bu çalışmada, ekstrüzyon ve bunu takiben basınçlı kalıplama yöntemi ile sürdürülebilir termoplastikpolilaktik asit (PLA) matrislikompozit malzemeler üretilmesi amaçlanmıştır. Doğal inorganik bir elyaf kaynağı olarak, 3 mm kırpılmış bazalt elyaflar ağırlıkça % 50 elyaf oranına kadar farklı oranlarda doğal kaynaklardan üretilmiş PLA matrise takviye edilmiştir. Kompozitpellet üretimi için tek vidalı ekstrüder ve ardından sıcak presleme işlemi ile kompozit paneller üretilmiştir. Hazırlanan bütün kompozit numuneler üzerinde yoğunluk, çekme, eğme ve darbe deneyleri yapılmıştır. Sonuçlar, bazalt elyaf takviye oranının artması ile kompozit malzemelerin yoğunluğunun arttığını göstermiştir. Aynı zamanda, artan elyaf oranı ile PLA kompozitlerin çekme, eğilme elastikiyet modüllerinin lineer şekilde artığı ve saf PLA ya göre yaklaşık %180 artış sağlanmıştır. İstatistik değerlendirme sonucunda ağırlıkça %45 elyaf oranında bazalt elyaf içeren PLA kompozitlerinin diğer elyaf oranlarına göre önemli derecede farka sahip olduğu ve sırasıyla 53,73 MPa, 118 MPa ve 1,49 kJ/m2 olmak üzere en yüksek çekme, eğme ve darbe dayanımına sahip olduğu görülmüştür.

🔖

Cite This Article

KAYA, M., ASLAN, M., GÜLER, O., ALVER, Ü. (2018). EFFECT OF FIBRE CONTENT ON THE MECHANICAL PROPERTIES OF BASALT FIBRE REINFORCED POLYLACTIC ACID (PLA) COMPOSITES. Textile and Apparel, Cilt: 28 Sayı: 1, 66–71. https://ajindex.com/articles/943582

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Ren X., 2003,“Biodegradable Plastics: A Solution of A Challenge?”, Journal of Cleaner Production Vol:11, pp: 27-35
  2. KoganF. M. and Nikitina O. V., 1994,“Solubility of Chrysotile Asbestos and Basalt Fibersin Relation to Their Fibrogenicand Carcinogenic Action”,Environment Health Perspective, Vol:102, pp: 205
  3. Gurev V. V.,Neproshin E. I., Mostovoi G. E,2001, “The Effect of Basalt Fiber Production Technology on Mechanical Properties of Fiber”, Glass and Ceramics, Vol: 58, pp: 62-65
  4. Carmignato S, De Rosa IM, Sarasini F, Valente M.,2009,“Basalt Fiber Reinforced VinylPolyester Composite: An Overview” In: Proceedings of 2nd International Conference on Innovative Natural FiberComposites for IndustrialApplications, Rome; April
  5. Lim, L. T., Auras R., Rubino M.,2008, “Processing Technologies for Poly(lactic acid)”, Progress in Polymer Science, Vol: 33,pp:820-852. 6.Zhang Y., Yu C., Chu P.K., L.F., Zhang C. and Ji J., 2012,“Mechanical and Thermal Properties of Basalt Fiber Reinforced Poly(butylene Succinate) Composites”, Materials Chemistry and Physics, Vol: 133, pp: 845– 849. 7.Manshor M.R., Anuar H., Aimi M.N.N., Fitrie M.I.A., NazriW.B.W., Sapuan S.M., El-Shekeil Y.A. andWahit M.U., 2014, “Mechanical, Thermal and Morphological Properties of Durian Skin Fiber Reinforced PLA Biocomposites”, Materials and Design, Vol: 59, pp: 279–286
  6. Jonoobi, M., Harun J., Mathew, A.P. andOksman, K.,2010,“Mechanical Properties of Cellulose Nanofiber (CNF) Reinforced Polylactic Acid (PLA) Prepared by Twin Screw Extrusion”, Composites Science and Technology, Vol: 70, 1742–1747
  7. CzigányT., Kovács G., TábiT., 2013, “Basalt Fiber Reinforced Poly(Lactic Acid) Composites For Engineerıng Applications”, 19th Internatıonal Conference on Composite Materials”,pp: 4377-4383
  8. Jones, R.F., 1998. “Guide to Short Fiber Reinforced Plastics”. Hanser Publishers, Munich, Germany
  9. Fu, S. Y., Lauke B, Ma Y.-W., 2009 “Science and Engineering of Short Fibre Reinforced Polymer Composites”, Woodhead Publishing, Cambridge, UK
  10. Andrzej K. Bledzki and Omar Faruk 2004,“Wood Fiber Reinforced Polypropylene Composites: Compression and Injection Molding Process”, Polymer–Plastics Technology and Engineering Vol. 43, No. 3, pp. 871–888 13.Monoobi, M., Harun J., Mathew, A.P. andOksman, K., 2010, “Mechanical Properties of Cellulose Nanofiber (CNF) Reinforced Polylactic Acid (PLA) Prepared by Twin Screw Extrusion”, Composites Science and Technology, Vol: 70, pp: 1742–1747
  11. Ochi, S., 2