Journals / Textile and Apparel / 2019 / Cilt: 29 Sayı: 1

DIFFERENT METHODS OF FABRICATING CONDUCTIVE NANOFIBERS

Pages
85–92
Publication Date
2019-03-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that conductive nanofibers can be successfully produced with different electrical conductivities depending on the method and the material.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Conductive nanofibers can be produced by different methods.
📊
Key Findings & Data:In this study, four different methods to fabricate conductive nanofibers were explained and supported with experimental results.
💡
Conclusion & Impact:The results showed that conductive nanofibers can be successfully produced with different electrical conductivities depending on the method and the material.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:conductive nanofibers · electrospinning · electrically assisted solution blowing

Abstract

Conductive nanofibers can be produced by different methods. In this study, four different methods to fabricate conductive nanofibers were explained and supported with experimental results. Nanofibers were made conductive by fabricating nanofibers from intrinsically conductive polymers (polyaniline/polyethylene oxide nanofiber production), coating the non-conductive nanofiber mat with a conductive material (copper electroplating of polyacrylonitrile nanofibers), adding a conducting material (carbon black nanoparticles, silver nanoparticles, ionic liquid) into the spinning solution, and heat treatment of the nanofiber mat (carbon and ITO nanofiber production). The surface and the electrical properties of the nanofibers were investigated. The advantages and disadvantages of the methods were discussed in detail. The results showed that conductive nanofibers can be successfully produced with different electrical conductivities depending on the method and the material.

🔖

Cite This Article

DÜZYER, Ş. (2019). DIFFERENT METHODS OF FABRICATING CONDUCTIVE NANOFIBERS. Textile and Apparel, Cilt: 29 Sayı: 1, 85–92. https://ajindex.com/articles/943541

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Ko, F, Aufy,A,Macdiarmid A, (Edited X.T. Ko, F.K., Aufy, A.Lam, H., “Electrostatistically generated nanofibers for wearable electronics” in “Wearable electronics and photonics.” CRC Press, 2005
  2. Aussawasathien,L.,D., Dong, J-H., Dai, “Electrospun polymer nanofiber sensors” Synth. Met., 154:37-40, 2005
  3. MacDiarmid, A.G.,‘Synthetic Metals’: A Novel Role for Organic Polymers (Nobel Lecture)” Angew. Chemie Int. Ed., 40 (14):2581–2590, 2001
  4. Thavasi, V.,G. Singh, S. Ramakrishna, “Electrospun nanofibers in energy and environmental applications” Energy Environ. Sci., vol. 1, no. 2, p. 205, 2008
  5. Duzyer, S., A. Hockenberger, and E. Zussman, “Characterization of solvent-spun polyester nanofibers” J. Appl. Polym. Sci., 120 (2): 759-769, 2011
  6. Sinha-Ray, S., M. W. Lee, S. Sinha-Ray, S. An, B. Pourdeyhimi, S. S. Yoon, A. L. Yarin, “Supersonic nanoblowing: a new ultra-stiff phase of nylon 6 in 20–50 nm confinement” J. Mater. Chem. C, 1 (21): 3491, 2013
  7. Lee, B.,M.W., Yoon, S.G., Yarin, A.L., Sinha-Ray, S., Pourdeyhimi, “US20140234457 A1,” 2014
  8. Zhang, Y.,G. C. Rutledge, “Electrical conductivity of electrospun polyaniline and polyaniline-blend fibers and mats” Macromolecules, 45(10): 4238–4246, 2012 9. Wei, M., J. Lee, B. Kang, J. Mead, “Preparation of Core-Sheath Nanofibers from Conducting Polymer Blends” Macromol. Rapid Commun., 26(14): 1127–1132, 2005
  9. Yu, QZ.,M.M. Shi, M. Deng, M. Wang, H.Z. Chen, “Morphology and conductivity of polyaniline sub-micron fibers prepared by electrospinning” Mater. Sci. Eng. B Solid-State Mater. Adv. Technol., 150(1):70–76, 2008
  10. Baik, W., W. Luan, R. H. Zhao, S. Koo, K. S. Kim, “Synthesis of highly conductive poly(3,4-ethylenedioxythiophene) fiber by simple chemical polymerization” Synth. Met.,159(13):1244-1246, 2009
  11. Latessa, G., F. Brunetti, A. Reale, G. Saggio, A. Di Carlo, “Piezoresistive behaviour of flexible PEDOT:PSS based sensors” Sensors Actuators, B Chem., 139 (2): 304–309, 2009
  12. Zhao, W., B. Yalcin, M. Cakmak, “Dynamic assembly of electrically conductive PEDOT:PSS nanofibers in electrospinning process studied by high speed video” Synth. Met., 203:107–116, 2015
  13. Liu, N.,G.Fang, J.Wan, H.Zhou,H. Long, X. Zhao, “Electrospun PEDOT:PSS–PVA nanofiber based ultrahigh-strain sensors with controllable electrical conductivity” J. Mater. Chem.,21(47). 18962, 2011
  14. Tiwari, M.K., A. L. Yarin, C. M. Megaridis, “Electrospun fibrous nanocomposites as permeable, flexible strain sensors” J. Appl.