Methylene Blue removal was performed with AC/Ag-1 with 658.488 m2/g, which had the highest surface area, and the Qmax value was calculated as 416. 66 mg/g.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:This study examines the characterization and adsorption features of silver that was added to oxygen containing activated carbons using the sol-gel method.
📊
Key Findings & Data:The surface area of the silver coated activated carbon (AC/Ag) Nano-composites, which were prepared using the sol-gel method, was measured with the Braunauer-Emmett-Teller surface area calculation method according to N2 adsorption at 77 K.
💡
Conclusion & Impact:Methylene Blue removal was performed with AC/Ag-1 with 658.488 m2/g, which had the highest surface area, and the Qmax value was calculated as 416. 66 mg/g.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Wild chestnut · Silver · sol-gel
Abstract
This study examines the characterization and adsorption features of silver that was added to oxygen containing activated carbons using the sol-gel method. The surface area of the silver coated activated carbon (AC/Ag) Nano-composites, which were prepared using the sol-gel method, was measured with the Braunauer-Emmett-Teller surface area calculation method according to N2 adsorption at 77 K. The microstructure and surface morphologies of the AC/Ag Nano-composite samples were examined with the use of Scanning Electron Microscope. Methylene Blue removal was performed with AC/Ag-1 with 658.488 m2/g, which had the highest surface area, and the Qmax value was calculated as 416. 66 mg/g.
ALTINTIĞ, E., SOYDAN, Ö. F. (2018). METHEYLENE BLUE ADSORPTION AND PREPARATION SILVER BOUND TO ACTİVATED CARBON WITH SOL-GEL METHOD. Sakarya University Journal of Science, Cilt: 22 Sayı: 6, 1812–1819. https://ajindex.com/articles/942105
G. Mezohegyi, F.P. van der Zee, J. Font, A. Fortuny, A. Fabregat, “Towards advanced aqueous dye removal processes: a short review on the versatile role of activated carbon”, J. Environ. Manage., vol. 102, pp.148–164, 2012.[2] Y. Guo, A.D. Rockstraw, “Physical and chemical properties of carbons synthesized from xylan, cellulose and kraft lignin by H3PO4 activation”, Carbon, vol. 44, pp. 1464-1475, 2006. [3] R.N. Khalili, M. Campbell, G. Sandi, J. Golas, “Production of Micro and Mesoporous Activated Carbon from Paper Mill Sludge”, Carbon, vol. 38, pp.1905-1915, 2000. [4] H. Deng, L. Yang, G. Tao, J. Daı, “Preparation and characterization of activated carbon from cotton stalk by microwave assisted chemical activation-Application in methylene blue adsorption from aqueous solution”, J. Hazard. Mater. Vol. 166, pp.1514-1521, 2009. [5] T.H.Liou, S. Jung, “Characteristics of microporous/mesoporous carbons prepared from rice husk under base- and acid-treated conditions”, J. Hazard. Mater. Vol. 171, pp. 693–703, 2009. [6] W. Wang, K. Xiao, T. He, L. Zhu, “Synthesis and characterization of Ag nanoparticles decorated mesoporous sintered activated carbon with antibacterial and adsorptive properties”, J. Alloy Compd. Vol. 647, pp. 1007-1012, 2015.[7] A.K. Karumuri, D.P. Oswal, H.A. Hostetler, S.M. Mukhopadhyay, “Silver nanoparticles attached to porous carbon substrates: robust materials for chemical-free water disinfection”, Mater. Lett. Vol. 109, pp. 83–87, 2013. [8] L. Pei, J. Zhou, L. Zhang, “Preparation and properties of Ag-coated activated carbon nanocomposites for indoor air quality control”, Build. Environ. Vol. 63, pp. 108-113, 2013. [9] Z. Shi, H. Zhou, X. Qing, T. Dai, Y. Lu, “Facile fabrication and characterization of poly(tetrafluoroethlene)@polypyrrole/nano-silver composite membranes with conducting and antibacterial property”, Appl. Surf. Sci.vol. 258, pp. 6359–6365, 2012.[10] K. Mallick, M.J. Witcom, M.S. Scurrell, “Polymer stabilized silver nanoparticles: a photochemical synthesis route”, J. Mater. Sci. Vol. 39, pp. 4459–4463, 2009. [11] I. Lee, S.W. Han, K. Kim, “Simultaneous preparation of SERS-active metal colloids and plates by laser ablation”, J.0 Raman Spectrosc. vol. 32, pp. 947–952, 2001. [12] H. Bönnemann, R. Richards, “Nanoscopic metal particles–synthetic methods and potential applications”, Eur. J. Inorg. Chem. vol. 10, pp. 2455–2480, 2001. [13] S. Senthilkumaar, K. Porkodi, R. Gomathi, A.G. Maheswari, N. Manonmani, “Sol gel derived silv