Journals / El-Cezeri / 2021 / Cilt: 8 Sayı: 3

The Shielding Parameters of the Superconducting Tin Based Solders

Kalay Tabanlı Süperiletken Lehim Alaşımlarının Zırhlama Parametreleri

Canan Aksoy(KARADENİZ TEKNİK ÜNİVERSİTESİ)0000-0003-3738-6886
Journal
El-Cezeri
Pages
1529–1535
Publication Date
2021-09-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that among the studied sample increasing tin content decreases the shielding efficiency and Sn20In80 system shows better shielding properties depend on the used energy.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the current study shielding parameters, the mass and linear attenuation coefficients, and Half Value Layer (HVL), Tenth Value Layer (TVL) and Mean Free Path (MFP) values were calculated theoretically used the calculation software Phy-X/PSD for superconducting lead free SnIn alloy solder system that the alloy composition were chosen from the binary phase diagram of SnIn and PbSn which has been mostly used solder alloy for in micro electric and cryogenic applications for decades.
📊
Key Findings & Data:The results showed that among the studied sample increasing tin content decreases the shielding efficiency and Sn20In80 system shows better shielding properties depend on the used energy.
💡
Conclusion & Impact:Thus, it needs to be considered the energy range to determine the thickness of the material subjected to the gamma radiation as the shielding parameters change depend on using energy
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Zayıflama katsayısı · Phy-X/PSD · süper iletkenler

Abstract

In the current study shielding parameters, the mass and linear attenuation coefficients, and Half Value Layer (HVL), Tenth Value Layer (TVL) and Mean Free Path (MFP) values were calculated theoretically used the calculation software Phy-X/PSD for superconducting lead free SnIn alloy solder system that the alloy composition were chosen from the binary phase diagram of SnIn and PbSn which has been mostly used solder alloy for in micro electric and cryogenic applications for decades. The results showed that among the studied sample increasing tin content decreases the shielding efficiency and Sn20In80 system shows better shielding properties depend on the used energy. Thus, it needs to be considered the energy range to determine the thickness of the material subjected to the gamma radiation as the shielding parameters change depend on using energy

Özet

Mevcut çalışmada zırhlama parametreleri, kütle ve lineer zayıflama katsayıları ile yarı değer kalınlık, (HVL), onda bir kalınlık değeri (TVL) ve ortalama serbest yol (MFP) değerleri teorik olarak Phy-X/PSD hesaplama yazılımı kullanılarak hesaplanmıştır. Süper iletken kurşunsuz SnIn lehim sistemi için, SnIn kompozisyonu değerleri, ikili faz diyagramından yararlanılarak seçildi ve çoğunlukla mikro elektrik ve kriyojenik uygulamalarda onlarca yıldır lehim olarak kullanılan PbSn alaşımı kullanıldı. Çalışmanın sonuçları, incelenen numunelerde artan kalay içeriğinin koruma verimliliğini azalttığını ve Sn20In80 sisteminin kullanılan enerjiye bağlı olarak daha iyi zırhlama özellikleri gösterdiğini ortaya koymuştur. Bu nedenle, zırhlama parametreleri enerji kullanımına bağlı olarak değiştiğinden, gama radyasyonuna maruz kalan malzemenin kalınlığını belirlemek için enerji aralığının dikkate alınması gerekir.

🔖

Cite This Article

Aksoy, C. (2021). The Shielding Parameters of the Superconducting Tin Based Solders. El-Cezeri, Cilt: 8 Sayı: 3, 1529–1535. https://doi.org/10.31202/ecjse.963643

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (29)

  1. Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. European Parliament and the Council of 27 January 2003 (OJ L 37. 13.2.2003. p. 19)
  2. Directive 2002/96/EC on waste electrical and electronic equipment. European Parliament and the Council of 27 January 2003 (OJ L 37. 13.2.2003. p. 24)
  3. Aksoy, C., Mousavi T., Brittles G., Grovenor C. R. M., and Speller S. C. "Lead-free solders for superconducting applications." IEEE Transactions on Applied Superconductivity 26, no. 3 (2016): 1-3.
  4. Mousavi. T., Aksoy. C. Grovenor. C.R.M. & Speller. S. C. Microstructure and superconducting properties of Sn–In and Sn–In–Bi alloys as Pb-free superconducting solders. Superconductor Science and Technology, 2015,29(1). 015012.
  5. Sürücü, A.M and Subaşı S. "Nanomateryallerin Kompozit Malzemelerin Radyasyon Zırhlama Özelliklerine Etkisinin İncelenmesi." El-Cezeri Journal of Science and Engineering, 2021, 8.1: 182-1941
  6. Sirin, M. The effect of titanium (Ti) additive on radiation shielding efficiency of Al25Zn alloy. Progress in Nuclear Energy, 2020,128, 103470.
  7. Karadoğan Işık, Z., Özdemir, Y., Kavaz, E., "Ni Tabanlı Bazı Süperalaşımların Foton Etkileşim Özelliklerinin İncelenmesi". El-Cezeri 8,2021, 552-566
  8. Aksoy, C. The X-Ray fluorescence parameters and radiation shielding efficiency of silver doped superconducting alloys. Radiation Physics and Chemistry, 2021, 186, 109543.
  9. Sarı S., Dizman S, Ovit Dağbaşı Gölü Çevresinden Alınan Toprak Örneklerinde Radyoaktivite ve Radyolojik Etkilerin Araştırılması (2020), El-Cezeri, 2020,Volume 7, Issue 3, 1122 - 1130
  10. Baltas, H., Sirin, M., Celik, A., Ustabas, & El-Khayatt, A. M. Radiation shielding properties of mortars with minerals and ores additives. Cement and Concrete Composites, (2019). 97, 268-278.
  11. Kaya, N., Tıraşoğlu, E., Apaydın, G., Aylıkcı, V., & Cengiz, E. K-shell absorption jump factors and jump ratios in elements between Tm (Z= 69) and Os (Z= 76) derived from new mass attenuation coefficient measurements. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, (2007). 262(1), 16-23.
  12. Şakar E, Özpolat ÖF, Alım B, Sayyed MI, Kurudirek M. Phy-X/PSD: development of a user friendly online software for calculation of parameters relevant to radiation shielding and dosimetry. Radiation Physics and Chemistry. 2020;166:108496.
  13. Mousavi, T., Aksoy, C., Grovenor, C., & Speller, S. Phase evolution of superconducting Sn–In–Bi solder alloys. IEEE Transactions on Applied Superconductivity, (2016), 26(3), 1-4.
  14. Xi, Yun, Lan-jun LIU, Fang-Qiu Zu, and Zhi-hao CHEN. "Effect of Temperature-induced Discontinuous Liquid Structure Change on the Solidification Behaviour and Solidified Structures of Pb-Sn Alloy [J]." Foundry (2004).
  15. “Density of Sn and In elements” https://www.angstromsciences.com/density-elements-chart. 05/07/2021
  16. Hubbell JH, Seltzer SM. Tables of X-ray mass attenuation coefficients from 1 keV to 20 MeV for elements Z=1–92. National Institute of Standards and Technology (IR) Report, No, 1995; 5632
  17. Berger MJ, Hubbell JH. XCOM: Photon Cross Sections Database. Web Version 1.2. National Institute of Standards and Technology, Gaithersburg, MD 20899, USA, 1999 (originally published as NBSIR 87-3597, XCOM: Photon Cross Sections on a Personal Computer, 1987, 1987–1999.
  18. Jackson DF, Hawkes DJ. X-ray attenuation coefficients of elements and mixtures. Physics Reports. 1981;70(3):169-233.
  19. Gerward L, Guilbert N, Jensen KB, Leving H. –a program for calculating X-ray attenuation coefficients. Radiation physics and chemistry. 2004;71:653-4.
  20. Gerward L, Guilbert N, Jensen KB, Levring H. X-ray absorption in matter. Reengineering XCOM. Radiation Physics and Chemistry. 2001;60(1-2):23-4.
  21. Mariyappan M., Marimuthu K., Sayyed M.I., Dong M.G., Kara U., Effect Bi2O3 on the physical, structural and radiation shielding properties of Er3+ ions doped bismuth sodium fluoroborate glasses, J. Non-Cryst. Solids, 499 (2018) 75–85
  22. Ağar, Osman. "Investigation on gamma radiation shielding behaviour of CdO–WO3–TeO2 glasses from 0.015 to 10 MeV. Cumhuriyet Science Journal, 2018, 39, no. 4: 983-990.
  23. Aksoy, C., Mousavi T., Brittles G., Grovenor C. R. M., and Speller S. C. "Lead-free solders for superconducting applications." IEEE Transactions on Applied Superconductivity 26, no. 3 (2016): 1-3.
  24. Mousavi. T., Aksoy. C. Grovenor. C.R.M. & Speller. S. C. Microstructure and superconducting properties of Sn–In and Sn–In–Bi alloys as Pb-free superconducting solders. Superconductor Science and Technology, 2015,29(1). 015012.
  25. Sirin, M. The effect of titanium (Ti) additive on radiation shielding efficiency of Al25Zn alloy. Progress in Nuclear Energy, 2020,128, 103470.
  26. Karadoğan Işık, Z., Özdemir, Y., Kavaz, E., "Ni Tabanlı Bazı Süperalaşımların Foton Etkileşim Özelliklerinin İncelenmesi". El-Cezeri 8,2021, 552-566
  27. Sarı S., Dizman S, Ovit Dağbaşı Gölü Çevresinden Alınan Toprak Örneklerinde Radyoaktivite ve Radyolojik Etkilerin Araştırılması (2020), El-Cezeri, 2020,Volume 7, Issue 3, 1122 - 1130
  28. Mousavi, T., Aksoy, C., Grovenor, C., & Speller, S. Phase evolution of superconducting Sn–In–Bi solder alloys. IEEE Transactions on Applied Superconductivity, (2016), 26(3), 1-4.
  29. Gerward L, Guilbert N, Jensen KB, Leving H. –a program for calculating X-ray attenuation coefficients. Radiation physics and chemistry. 2004;71:653-4.