SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2023 / Cilt: 23 Sayı: 2

Investigation of Mechanical, Elastic and Thermodynamic Properties of Ni2VAl Compound

Ni2VAl Bileşiğinin Mekanik, Elastik ve Termodinamik Özelliklerinin İncelenmesi

Tahsin ÖZER
Nihat ARIKAN
Pages
466–473
Publication Date
2023-05-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

With the study, it was seen that the Ni2VAl compound was mechanically stable, ductile, anisotropic, and soft.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the structural, mechanical, and thermodynamic properties of Ni2VAl compound from Heusler family, which has technological importance, were investigated theoretically by first principles method.
📊
Key Findings & Data:In addition, internal energy, vibrational energy, entropy, and specific heat capacity were evaluated in the temperature range of 0-800 K.
💡
Conclusion & Impact:With the study, it was seen that the Ni2VAl compound was mechanically stable, ductile, anisotropic, and soft.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Heusler bileşikler · L21-tipi Ni2VAl · Mekanik özellikler

Abstract

In this study, the structural, mechanical, and thermodynamic properties of Ni2VAl compound from Heusler family, which has technological importance, were investigated theoretically by first principles method. Firstly, structural optimization was performed to determine the ground state and lowest energy level of the compound, and elastic constants were calculated using the optimized parameters obtained as a result of structural optimization. The calculated lattice parameter agrees with previous studies. In addition, elastic modulus, Vicker hardness, melting temperature, Debye temperature, sound velocities, minimum thermal conductivity and anisotropy were investigated since the determined elastic constants meet the mechanical stability criteria. The Vicker hardness and ductile/brittle nature of the studied material were analyzed. In addition, internal energy, vibrational energy, entropy, and specific heat capacity were evaluated in the temperature range of 0-800 K. In calculations, open-source Quantum Espresso software and thermo_pw package distributed with this software were preferred. With the study, it was seen that the Ni2VAl compound was mechanically stable, ductile, anisotropic, and soft.

Özet

Bu çalışmada teknolojik öneme haiz Heusler ailesinden Ni2VAl bileşiğinin yapısal, mekanik ve termo dinamik özellikleri ilk prensipler yöntemi ile teorik olarak incelenmiştir. Öncelikle bileşiğin temel durumunu ve en düşük enerji seviyesini belirlemek için yapısal optimizasyon yapılmış, yapısal optimizasyon neticesinde elde edilen optimize parametreler kullanılarak elastik sabitler hesaplanmıştır. Hesaplanan örgü parametresi önceki çalışmalar ile uyum içeresindedir. Ayrıca belirlenen elastik sabitler mekanik kararlılık kriterlerini karşıladığından elastik modül, Vicker sertliği, erime sıcaklığı, Debye sıcaklığı, ses hızları, minimum termal iletkenlik ve anizotropi incelenmiştir. Çalışılan malzemenin Vicker sertliği ve sünek/kırılgan doğası analiz edilmiştir. Ayrıca iç enerji, titreşim enerjisi, entropi ve özgül ısı kapasitesi 0-800 K sıcaklık aralığında değerlendirilmiştir. Hesaplamalarda açık kaynak Quantum Espresso yazılımı ve bu yazılım ile dağıtımı yapılan thermo_pw paketi tercih edilmiştir. Yapılan çalışma ile Ni2VAl bileşiğinin mekanik kararlı, sünek, anizotrop ve yumuşak olduğu görüldü.

🔖

Cite This Article

ÖZER, T., ARIKAN, N. (2023). Investigation of Mechanical, Elastic and Thermodynamic Properties of Ni2VAl Compound. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 23 Sayı: 2, 466–473. https://ajindex.com/articles/920846

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Anderson, O. L. 1963. A simplified method for calculating the debye temperature from elastic constants. Journal of Physics and Chemistry of Solids, 24(7):, 909–917. https://doi.org/10.1016/0022-3697(63)90067-2
  2. Arıkan, N., Özturk, A. İ. 2021. Ag2ScAl Bileşiğinin Mekanik ve Termodinamik özelliklerinin Ab İnitio Hesabı. Kadirli Uygulamalı Bilimler Fakültesi Dergisi. Beckstein, O., Klepeis, J. E., Hart, G. L. W., Pankratov, O. 2001. First-principles elastic constants and electronic structure of α−Pt2 Si and PtSi. Physical Review B, 63(13):, 134112. https://doi.org/10.1103/PhysRevB.63.134112
  3. Buessem, D. H., Chung, W. R. 1968. Anisotropy in Single-Crystal Refractory Compounds (F. W. Vahldiek, & S. A. Mersol, Ed.), Boston, MA,: Springer US. https://doi.org/10.1007/978-1-4899-5307-0
  4. Cahill, D. G., Watson, S. K., Pohl, R. O. 1992. Lower limit to the thermal conductivity of disordered crystals. Physical Review B, 46(10):, 6131. https://doi.org/10.1103/PhysRevB.46.6131
  5. Chen, X.-Q., Niu, H., Li, D., Li, Y. 2011. Modeling hardness of polycrystalline materials and bulk metallic glasses. Intermetallics, 19(9):, 1275–1281. https://doi.org/10.1016/j.intermet.2011.03.026
  6. Clarke, D. R. 2003. Materials selections guidelines for low thermal conductivity thermal barrier coatings. Surface and Coatings Technology, 163–164:, 67–74. https://doi.org/10.1016/S0257-8972(02)00593-5 da Rocha, F. S., Fraga, G. L. F., Brandão, D. E., da Silva, C. M., Gomes, A. A. 1999. Specific heat and electronic structure of Heusler compounds Ni2TAl (T=Ti, Zr, Hf, V, Nb, Ta). Physica B: Condensed Matter, 269(2):, 154–162. https://doi.org/10.1016/S0921-4526(99)00102-7
  7. Everhart, W., Newkirk, J. 2019. Mechanical properties of Heusler alloys. Heliyon, 5(5):, e01578. https://doi.org/10.1016/j.heliyon.2019.e01578
  8. Every, A. G. 1980. General closed-form expressions for acoustic waves in elastically anisotropic solids. Physical Review B, 22(4):, 1746. https://doi.org/10.1103/PhysRevB.22.1746
  9. Fine, M. E., Brown, L. D., Marcus, H. L. 1984. Elastic constants versus melting temperature in metals. Scripta Metallurgica, 18(9):, 951–956. https://doi.org/10.1016/0036-9748(84)90267-9
  10. Fischer, T. H., Almlof, J. 1992. General methods for geometry and wave function optimization. The Journal of Physical Chemistry, 96(24):, 9768–9774. https://doi.org/10.1021/j100203a036
  11. Gaillac, R., Pullumbi, P., Coudert, F.-X. 2016. ELATE: an open-source online application for analysis and visualization of elastic tensors. Journal of Physic