Journals / Mühendislik Bilimleri ve Araştırmaları Dergisi / 2021 / Cilt: 3 Sayı: 1

Determining Suitable Regions for Potential Offshore Wind Farms in Bandırma Bay using Multi-criteria-Decision-Making Method

Çok-kriterli Karar Verme Metodu Kullanarak Bandırma Körfezinde Uygun Deniz Üstü Rüzgar Enerji Santral Alanlarının Tespiti

Pages
123–132
Publication Date
2021-04-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Consequently, two locations are found to be suitable; one is on the northwest and the other one is on the north east of Bandırma, with capacities of 72 MW and 48 MW, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Wind energy is an environmentally friendly, profitable, and renewable energy resource.
📊
Key Findings & Data:Wind energy eployment is increasing in the last two decades.
💡
Conclusion & Impact:Consequently, two locations are found to be suitable; one is on the northwest and the other one is on the north east of Bandırma, with capacities of 72 MW and 48 MW, respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Rüzgar Enerjisi · Deniz Üstü · Uygun Alan Seçimi

Abstract

Wind energy is an environmentally friendly, profitable, and renewable energy resource. Wind energy eployment is increasing in the last two decades. In this paper, Bandırma bay which has a potential for offshore wind deployment is studied to determine the most suitable area in it and eventually potential offshore power capacity of the location is estimated. This study combines applications of Geographical Information System and Multi-Criteria- Decision-Making Methodology to obtain fast results supported with visual documentation. In this scope, eight standard criteria such as wind speed, water depth, bird migration lines are applied and nvestigated in detail by using Geographical Information System. It is found that there is sufficient wind speed t the shallow level of the sea. Consequently, two locations are found to be suitable; one is on the northwest and the other one is on the north east of Bandırma, with capacities of 72 MW and 48 MW, respectively.

Özet

Rüzgar enerjisi çevre dostu, karlı ve yenilenebilir bir enerji kaynağıdır. Rüzgar enerjisi yayılımı son yirmi yılda artmaktadır. Bu çalışmada, deniz üstü rüzgar yayılımı potansiyeli olan Bandırma körfezi içindeki en uygun alanın belirlenmesi için çalışılmış ve sonuç olarak buradaki potansiyel deniz üstü güç kapasitesi tahmin dilmiştir. Bu çalışma, görsel ve hızlı analiz sonuçlarını elde etmek için Coğrafi Bilgi Sistemi ve Çok-Kriterli-Karar-Verme Metodolojisi metodlarını birlikte kullanmaktadır. Bu kapsamda rüzgar hızı, deniz derinliği, kuş göç hatları gibi sekiz standart kriter uygulanarak detaylı bir şekilde Coğrafi Bilgi Sistemi kullanılarak incelenmektedir. Bandırma'nın deniz trafiği yoğunluğunun yüksek olması nedeniyle uygun bölge seçiminde gemi rotaları önemli ölçüde rol oynarken, askeri bölgelere, haberleşme kablolarına ve turistik alanlara yakınlık uygun bölge seçiminde sonucu etkileyecek derecede değildir. Sonuç olarak, denizüstü rüzgar santrali kurulumu için iki konum uygun olarak bulunmuştur; biri kuzeybatıda, diğeri ise Bandırma körfezinin kuzey doğusunda, sırasıyla 72 MW ve 48 MW kapasitelidir.

🔖

Cite This Article

KARİPOĞLU, F., ÖZTÜRK, S., GENÇ, M. S. (2021). Determining Suitable Regions for Potential Offshore Wind Farms in Bandırma Bay using Multi-criteria-Decision-Making Method. Mühendislik Bilimleri ve Araştırmaları Dergisi, Cilt: 3 Sayı: 1, 123–132. https://ajindex.com/articles/911666

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. M. Satir, F. Murhpy, K. and McDonnel “Feasibility study on an offshore wind farm in Aegean Sea, Turkey”, Renewable and Sustainable Energy Reviews, pp. 2552-2562, 2018
  2. C. Emeksiz, and B. Demirci “The determination of offshore wind energy potential of Turkey by using novelty hybrid site selection method”, Sustainable Energy Technologies and Assessments, vol. 36, 2019
  3. U. Cali, N. Erdogan, S. Kucuksari and M. Argin. “TECHNO-ECONOMIC analysis of high potential offshore wind farm locations in Turkey”, Energy Strategy Reviews, vol. 22, pp. 325-336, 2018
  4. M. Argin, V. Yerci, N. Erdogan,S. Kucuksari, and U. Cali “Exploring the offshore wind energy potential of Turkey based on multi-criteria site selection”, Energy Strategy Reviews, vol. 23, pp. 33-46, 2019
  5. M S. Genç, M. Gökçek “Evaluation of wind characteristics and energy potential in Kayseri, Turkey”, Journal of Energy Engineering-ASCE, vol. 135(2), pp. 33-43, 2009
  6. M. Gökçek, M S. Genç “Evaluation of electricity generation and energy cost of wind energy conversion systems (WECSs) in Central Turkey”, Applied Energy, vol. 86(12), pp. 2731-2739, 2009
  7. M S. Genç “Economic viability of water pumping systems supplied by wind energy conversion and diesel generator systems in North Central Anatolia, Turkey”, Journal of Energy Engineering, vol. 137(1), pp. 21-35, 2010
  8. M S. Genç, M. Çelik, İ. Karasu “A review on wind energy and wind–hydrogen production in Turkey: A case study of hydrogen production via electrolysis system supplied by wind energy conversion system in Central Anatolian Turkey”, Renewable and sustainable energy reviews, vol. 16(9), pp. 6631-6646, 2012
  9. G. Genç, M. Çelik, M S. Genç “Cost analysis of wind-electrolyzer-fuel cell system for energy demand in Pınarbaşı-Kayseri”, International journal of hydrogen energy, vol. 37(17), pp.12158-12166, 2012
  10. M S. Genç “Determination of the most appropriate site selection of wind power plants based Geographical Information System and Multi-Criteria Decision-Making approach in Develi, Turkey”, International Journal of Sustainable Energy Planning and Management, vol. 30, pp. 97-114, 2021
  11. Global Wind Atlas Map (GWA), 2020.
  12. Emodnet Human Activity, 2020.
  13. Copernicus Data Sources, CLC 2000.
  14. Birdmap, 2020. https:// birdmap.5dvision.ee/en [15] M. Szurek, J. Blackhowski, A. Nowacha “GIS-based method