Journals / Konya Journal of Engineering Sciences / 2015 / Cilt: 3 Sayı: 4

Enrichment of Waste Magnesite Ore: Characterization, Properties and Magnetic Separator Application

ATIK MANYEZİT CEVHERİNİN ZENGİNLEŞTİRİLMESİ: KARAKTERİZASYON, ÖZELLİKLER VE MANYETİK AYIRICI UYGULAMASI

Pages
58–69
Publication Date
2015-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to results of beneficiation studies; it is understood that waste magnesite ore which has average 12.60% SiO2 content can be enriched quality of average 1.54% SiO2 content by dry type magnetic separator devices, and it can be recycled into the economy.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, enrichment of waste magnesite ore, stocked in open pit magnesite mine was aimed.
📊
Key Findings & Data:Therefore, dry type magnetic separation method and permroll type permanent magnet magnetic separation device was used.
💡
Conclusion & Impact:According to results of beneficiation studies; it is understood that waste magnesite ore which has average 12.60% SiO2 content can be enriched quality of average 1.54% SiO2 content by dry type magnetic separator devices, and it can be recycled into the economy.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Manyezit · Atık cevher · Zenginleştirme

Abstract

In this study, enrichment of waste magnesite ore, stocked in open pit magnesite mine was aimed. Therefore, dry type magnetic separation method and permroll type permanent magnet magnetic separation device was used. Required samples for this study have been obtained from a company of magnesite producer. XRD, Optical and chemical analyses were carried out in order to determination of properties and ore characterization. According to results of beneficiation studies; it is understood that waste magnesite ore which has average 12.60% SiO2 content can be enriched quality of average 1.54% SiO2 content by dry type magnetic separator devices, and it can be recycled into the economy.

Özet

Bu çalışmada, açık ocak manyezit işletmesinde stoklanmış, atık manyezit cevherinin zenginleştirilmesi amaçlanmıştır. Bunun için, kuru tip manyetik ayırma yöntemi ve permroll tipi sabit mıknatıslı manyetik ayırma cihazı kullanılmıştır. Bu çalışma için gerekli numuneler, manyezit üreticisi bir kuruluştan temin edilmiştir. Cevherlerinin karakterizasyon tayini ve özelliklerinin belirlenmesi amacıyla; XRD, Optik ve kimyasal analizler yapılmıştır. Zenginleştirme çalışmaları sonucuna göre; ortalama %12,60 SiO2 içeriğe sahip atık manyezit cevheri, ortalama %1,54 SiO2 kalitesinde zenginleştirilebileceği ve ekonomiye geri kazandırılabileceği anlaşılmıştır.

🔖

Cite This Article

ERDOĞAN, N. (2015). Enrichment of Waste Magnesite Ore: Characterization, Properties and Magnetic Separator Application. Konya Journal of Engineering Sciences, Cilt: 3 Sayı: 4, 58–69. https://ajindex.com/articles/909427

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Abdel-AAl, E.A., Ibrahim, I.A., Rasha, M.M., and Ismal, A.K., 1994. "Hydrometallurgical Processing of Egyptian Magnesite Ore for Production of Magnesium Sulphate", Fizykochemiczne Problemy Mineralurgii, 165–175.
  2. Abdel-AAl, E.A., Ibrahim, I.A., Rashad, M.M., and Ismail, A.K., 1996, "Hydrometallurgical Processing of Egyptian Magnesite Ore", Fizyochemiczne Problemy Mineralurgii, 30, 207–216.
  3. Akkoyun, Ö., and Ünver, B., 2001, "Küçük Ölçekli Manyezit İşletmelerinde Üretim Veriminin Artırılması İçin Öncelikle Ne Yapılabilir ? - Bir Örnek", In Türkiye 17. Uluslararası Madencilik Kongresi ve Sergisi (pp. 75–80).
  4. Amer, A.M., and Staden, V., 2010, "Hyrdometallurgical Processing of Low Grade Egyptian Magnesite", Physicochemical Problems of Mineral Processing, 44, 5–12.
  5. Aslani, S., Hashemi, H.R.S.B., and Arianpour, F., 2010, "Beneficiation of Iranian Magnesite Ores by Reverse Flotation Process and Its Effects on Shaped and Unshaped Refractories Properties", Bulletin of Materials Science, 33(6), 697–705. http://doi.org/10.1007/s12034-011-0150-0
  6. Ayvazoğluyüksel, G., 2011, Atık Elektro filtre Manyezit Tozlarının Çözünme Davranışınım Optimizasyonu ve Geri Kullanılabilirliğinin Belirlenmesi, Yüksek Lisans Tezi, Eskişehir Osmangazi Üniversitesi.
  7. Bentlı, I., Erdogan, N., Birici, B., Topal, U., and Şahbaz, O., 2004, "Manyezit Ara Ürünün KalsinasyonManyetik Ayırma Yöntemleriyle Zenginleştirilmesi", Uluslararası 5. Endüstriyel Hammaddeler Sempozyumu (pp. 216–221).
  8. Chowdhury, A.A., Rasul, M.G., and Khan, M.M.K., 2002, "Thermodynamic Processes and Characterisation of Dead Burned Magnesia: A Review", Recent Advances in Energy and Envıronment Thermodynamic, 344–349.
  9. Demirbas, A., 2006, "Acetic Acid Leaching of Magnesia from Magnesite Via Calcination", Indian Journal of Chemical Technology, 13(2), 135–138.
  10. Dobbins, M., Domenico, J., and Dunn, P., 2007, "A Discussion of Magnetic Separation Techniques for Concentrating Ilmenite and Chromite Ores", In The 6th International Heavy Minerals Conference “Back to Basics”, The Southern African Institute of Mining and Metallurgy (pp. 197–204).
  11. Dobbins, M., Dunn, P., and Sherrell, I., 2009, "Recent Advances in Magnetic Separator Designs and Applications", In The 7th International Heavy Minerals Conference “What next”, The Southern African Institute of Mining and Metallurgy (pp. 63–70).
  12. Drzymala, J., 2007, "Mineral Processing, Foundations of Theory and Practice of Minerallurgy", Wroclaw: Wroclaw University of Technology. Ekmekci, Z., 1990, "Yük