Journals / Konya Journal of Engineering Sciences / 2019 / Cilt: 7 Sayı: 1

PURIFICATION PHASES OF ZINC SULPHATE SOLUTION OBTAINED FROM NEUTRAL LEACHING PROCESS OF ZINC CALCINE

Pages
22–29
Publication Date
2019-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, special attention is dedicated to the factors that have influence in the process development such as concentration, temperature, time, compressed air, etc.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this paper is based in analyze of the zinc sulphate solution obtained from neutral leaching process of zinc calcine in "Trepca" and its purification from impurities.
📊
Key Findings & Data:The sulphate solution can released from metal impurities based on the fact that they have higher electro - chemical potential than zinc and, as such, during the refining process they separate and precipitate in metallic form.
💡
Conclusion & Impact:Also, special attention is dedicated to the factors that have influence in the process development such as concentration, temperature, time, compressed air, etc.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Impurities · Purification process · Sulphate solution

Abstract

The aim of this paper is based in analyze of the zinc sulphate solution obtained from neutral leaching process of zinc calcine in "Trepca" and its purification from impurities. This solution besides zinc contains also and other impurities such as (Cu, Cd, Co, Ni, As, Ge, Sb, Se, Te, Ag etc.), which are with different concentrations. The sulphate solution can released from metal impurities based on the fact that they have higher electro - chemical potential than zinc and, as such, during the refining process they separate and precipitate in metallic form. Treatment of solution with appropriate technological methods technologically is very important in continuation of the electrolysis process and is accompanied by economic effects, because of non-ferrous and rare metals benefit. In this paper are described the phases of the purification process including acidic purification, cooling, needed materials and equipments for the refining process. Also, special attention is dedicated to the factors that have influence in the process development such as concentration, temperature, time, compressed air, etc.

Özet

The aim of this paper is based in analyze of the zinc sulphate solution obtained from neutral leaching process of zinc calcine in "Trepca" and its purification from impurities. This solution besides zinc contains also and other impurities such as (Cu, Cd, Co, Ni, As, Ge, Sb, Se, Te, Ag etc.), which are with different concentrations. The sulphate solution can released from metal impurities based on the fact that they have higher electro - chemical potential than zinc and, as such, during the refining process they separate and precipitate in metallic form. Treatment of solution with appropriate technological methods technologically is very important in continuation of the electrolysis process and is accompanied by economic effects, because of non-ferrous and rare metals benefit. In this paper are described the phases of the purification process including acidic purification, cooling, needed materials and equipments for the refining process. Also, special attention is dedicated to the factors that have influence in the process development such as concentration, temperature, time, compressed air, etc.

🔖

Cite This Article

DEVA, N., RIZAJ, M. (2019). PURIFICATION PHASES OF ZINC SULPHATE SOLUTION OBTAINED FROM NEUTRAL LEACHING PROCESS OF ZINC CALCINE. Konya Journal of Engineering Sciences, Cilt: 7 Sayı: 1, 22–29. https://ajindex.com/articles/909243

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Boyanov, S.B., Victoria, V.K., Nikolai, K.K., 2004, “Purification of zinc sulfate solutions from cobalt and nickel through activated cementation”, Hydrometallurgy 73, 163–168.
  2. Dreher T.M., Nelson A., Demopoulos G.P., Filippou D., 2001, “The Kinetics of Cobalt Removal by Cementation from an Industrial Zinc Electrolyte in the Presence of Cu, Cd, Pb, Sb and Sn Additives” Hydrometallurgy, 60, pp. 105-116.
  3. Friedrich Berndt., Kruger Joachim, Mendez Bernal Graciella,2002 “ Alternative solution purification in the hydrometallurgical zinc production”, Savez Inzenjera metalurgije Jugoslavije. Free M, lebrary (e-book collection).2013 Hydrometallurgy: fundamentals and applications. Hoboken, N.J: TMS-Wiley. Fosnachtet, D. R., O’Keefe T. J., 1983, “The effects of certain impurities and their interactions on zinc electrowinning”, Metallurgy Transactions, 14, 645-655. Fugleberg S., 2014, “Improving the competitiveness of the electrolytic zinc process by chemical reaction engineering approach” Laboratory of Industrial Chemistry and Reaction Engineering,. Ha M K, et.al., Kumar V, Singh R J,2001 “ Review of hydrometallurgical recovery of zinc from industrial wastes “, Resources Conservation and Recycling, 2001, 33(1): 1−22. Han J., Liu W., Qin W., Zheng Y., and Luo H., 2016, “Optimization Study on the Leaching of High Iron-Bearing Zinc Calcine After Reduction Roasting,” Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 47, no. 1, pp. 686–693. Karoleva V., “Metallurgy of non-ferrous metals”, V.2, Technika, Sofia, 1986 (in Bulgarian). Kazanbaev L.A., Kozlov P.A., Kubasov V.L., Kolesnikov A.V., 2006 “Zinc Hydrometallurgy”, Ore and Metals, p. 176. Lew R. W.,1994. “The removal of cobalt from zinc sulphate electrolytes using copper-antimony process” Vol. British columbia, Vancouver, Canada. Li Mi, Peng Bing, Chai Li-yuan, Peng Ning, Yan Huan, Hou Dong-ke, 2012 “ Recovery of iron from zinc leaching residue by selective reduction roasting with carbon “, Journal of Hazardous Materials, 2012, 237−238: 323−330. Moghaddam J., Sarraf-Mamoory R., Abdollahy M., Yamini Y.,2006 “Purification of zinc ammoniacal leaching solution by cementation: Determination of optimum process conditions with experimental design by Taguchi’s method”, Separation and Purification Technology, 51, 157-164.
  4. Muresan L., Maurin G., Oniciu L. and Gaga D., Hydrometallurgy, 43 (1996) 345. Näsi J., 2007 “ Intensified use of process measurements in hydrometallurgical