Journals / Journal of International Environmental Application and Science / 2026 / Volume: 12 Issue: 1

Optimization of the Process the Mixture of Copper ores for Melting the Analytical Method

Muharrem Zabeli(Department of Materials and Metallurgy; Faculty of Geosciences, University of Mitrovica, Industrial Park Trepça 40000, Mitrovica, Republic of Kosovo)
Pages
—
Publication Date
2017-03-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Determination as accurate enabled by knowledge on the theoretical foundations of the process of melting the ore different copper chemical reactions that must take place during melting, accurate calculations and work much better furnace for melting with all assistive devices.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The basic aim of the process of smelting in furnaces with flame is smelting full of material and reaching effects optimal technical or economical to process with minimum consumption of fuel, maximum speed and pass as full of copper in the main product of the merger in Matte.
📊
Key Findings & Data:In oven with flame, except concentration concentrate can be processed and also other material that contents copper or other precious metals that are characterized by the fine granulomeric structure as: Rich copper ore; Rich ores of precious metals; Furnace dust in copper metallurgy; The converter slag; Restoration materials with flame furnace; Surpluses and by-products of different branches of the metallurgy.
💡
Conclusion & Impact:Determination as accurate enabled by knowledge on the theoretical foundations of the process of melting the ore different copper chemical reactions that must take place during melting, accurate calculations and work much better furnace for melting with all assistive devices.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:ore · copper · melting

Abstract

The basic aim of the process of smelting in furnaces with flame is smelting full of material and reaching effects optimal technical or economical to process with minimum consumption of fuel, maximum speed and pass as full of copper in the main product of the merger in Matte. In oven with flame, except concentration concentrate can be processed and also other material that contents copper or other precious metals that are characterized by the fine granulomeric structure as: Rich copper ore; Rich ores of precious metals; Furnace dust in copper metallurgy; The converter slag; Restoration materials with flame furnace; Surpluses and by-products of different branches of the metallurgy. One of the most important factors to good work the operation of the furnace development of chemical reactions that enable the creation of products composed of certain (mattes and slag) is the process of calculating (determining) the amount of ore that must be mixed and which are available amalgamation. Determination as accurate enabled by knowledge on the theoretical foundations of the process of melting the ore different copper chemical reactions that must take place during melting, accurate calculations and work much better furnace for melting with all assistive devices.

🔖

Cite This Article

Zabeli, M., Zeka, B., Deva, N. (2017). Optimization of the Process the Mixture of Copper ores for Melting the Analytical Method. Journal of International Environmental Application and Science, Volume: 12 Issue: 1. https://ajindex.com/articles/1112427

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Agolli F, (1985) Metalurgjia e metaleve me ngjyrë, UP Prishtinë.
  2. Biswas AK, Davenport WG, (1994) Extractive Metallurgy of Copper, 3rd Edition, Elsevier Science Press, New York, NY.
  3. HabashiF, (1984) Principles of extractive metallurgy, McGraw Hill, New York, Vol 3. RosenkqvistT, (1994), Principles of extractive metallurgy, McGrawHill, New York.
  4. Vračar R, Kamberović Z, Sinadinović.D, Savović V, Stopić S, Cerović K, (2000) Proračuni u metalurgiji obojenih metala, Bakar-Bor. William G, Mark E, Biswas AK,(2002) Extractive Metallurgy of Copper, 4th Edition.
  5. Zander M, (2011) Improving Copper Recovery from Production Slags by Advanced Stirring Methods; Copper, General Pyrometallurgy, Vessel Integrity, Process Gas Treatment, vol.1.