Journals / Journal of International Environmental Application and Science / 2017 / Cilt: 12 - Sayı: 1

Factors Affecting the Increase in the Pre-reduction Scale of the Fe-Ni Ore in the Rotary Kiln

Pages
52–58
Publication Date
2017-03-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Whereas, during industrial simulations the pre-reduction scale for the four analyzed charges in the rotary kilns increases by 40% in comparison to the industrial cases.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The pre-reduction process in the rotary kiln is the key factor in acquiring the metal of iron-nickel from the electric furnaces.This paper's purpose is the impact of factors affecting the growth of the pre-reduction scale, and presents the factors affecting the pre-reduction scale of the iron-nickel ore in the rotary kilns in the new Foundry of the new Ferronikel in Drenas.
📊
Key Findings & Data:The research was conducted in the industrial and laboratory route in the new Foundry of the new Ferronikel in Drenas through the years 2007-2014, whereas the industrial simulations of four cases were conducted in the laboratory of Fe-Ni Kavadarci-Macedonia in the laboratory kiln "Linder" in 2012.
💡
Conclusion & Impact:Whereas, during industrial simulations the pre-reduction scale for the four analyzed charges in the rotary kilns increases by 40% in comparison to the industrial cases.
🔬Design:Research Article
📍Scope:2007-2014 Verileri
⚙️Variables:pre-reduction · iron-nickel · ore

Abstract

The pre-reduction process in the rotary kiln is the key factor in acquiring the metal of iron-nickel from the electric furnaces.This paper's purpose is the impact of factors affecting the growth of the pre-reduction scale, and presents the factors affecting the pre-reduction scale of the iron-nickel ore in the rotary kilns in the new Foundry of the new Ferronikel in Drenas. The research was conducted in the industrial and laboratory route in the new Foundry of the new Ferronikel in Drenas through the years 2007-2014, whereas the industrial simulations of four cases were conducted in the laboratory of Fe-Ni Kavadarci-Macedonia in the laboratory kiln "Linder" in 2012. Through industrial research the average of the pre-reduction scale of the iron-nickel ore for the analyzed years exceeds 45%. Whereas, during industrial simulations the pre-reduction scale for the four analyzed charges in the rotary kilns increases by 40% in comparison to the industrial cases.

🔖

Cite This Article

BAJRAKTARİ-GASHİ, Z., ZABELİ, M. (2017). Factors Affecting the Increase in the Pre-reduction Scale of the Fe-Ni Ore in the Rotary Kiln. Journal of International Environmental Application and Science, Cilt: 12 - Sayı: 1, 52–58. https://ajindex.com/articles/376818

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Anonym. (2014) Daily, monthly and yearly reports of obtaining Fe-Ni, official documentation of smelting complex of New CoFerronikeli Complex - Drenas, 2009 -2014. BajraktariGashi Z, (2012) Theoretical and experimental research in order to reach optimum technical, technologic and productive parameters during qualitative reduction of Ni ore in Fe-Ni foundry in Drenas. PHD, Mitrovica, Republic of Kosovo. BajraktariGashi Z, Maksuti Rr, Murati N, (2015) The Usage of Pet Kok is a Possibility of Reducing the Amount of Heavy Oil in the Rotary Kilns in the New Foundry of the New Ferronikel in Drenas. Appl. Mech. & Mat.749, 111-115.
  2. Gashi Z, Gashi I, Rama M, (2013) Mathematical modeling of nickel ores pre-reduction simulations in laboratory rotary kiln “Linder”. Int. J. Gen. Eng. & Tech. (IJGET), 2, 2. Gashi Z, ImeriSh, Lohja N, Zabeli M, Tahiraj N, Murati N, (2011) Experimental Research on prereduction of Nickel silicate ore in New Ferronickel Factory in Drenas, WSEAS and NAUNConferences, Corfu Island, Greece, July 14-17.
  3. Gashi Z, ImeriSh, Tahiraj N, Kosovo dry lignite treatment in the process of ore frying in the smelter of New Co Ferronickel in Drenas, SGEM-2011 11thInternational Multidisciplinary Scientific Geo Conference. Gashi Z, ImeriSh, Tahiraj N, Murati N, (2010) Drying of Ni in silicate ore dry machine and rotaryeffects on technological process in the rotary kiln in smelting complex of Ferronickel inDrenas, Alb-Shkenca, Tirana. Zabeli M, Bajraktari-Gashi Z, Haxhiaj A, (2016) Determination and Calculation of Components Cargo (Slag) During Smelting of Copper Ores. Int. J. Mine. Proc. & Extra. Metal., 1, 14-18.