Journals / Konya Journal of Engineering Sciences / 2020 / Cilt: 8

ANALYSIS OF ELECTRICAL ENERGY IN THERMOELECTRIC GENERATOR IN SANDWICH DESIGN

Sandviç Tasarımı İçerisindeki Termoelektrik Jeneratörde Elekrtrik Enerjisinin Analizi

Pages
76–91
Publication Date
2020-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of experimental studies, it is observed that the type of the material that conveys thermal water and the order of transmission of hot/cold water through sandwich blocks have an effect on the power produced by both TEC1-12706 and TEC1-12710

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Researchers and industry are seeking to manage energy better by increasing the efficiency of the energy system because of the increasing importance of energy in recent years.
📊
Key Findings & Data:As TEG, TEC1-12706 and TEC1-12710 materials were used.
💡
Conclusion & Impact:As a result of experimental studies, it is observed that the type of the material that conveys thermal water and the order of transmission of hot/cold water through sandwich blocks have an effect on the power produced by both TEC1-12706 and TEC1-12710
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Termoelektrik jeneratörler · çıkış gücü ve verim · yenilenebilir enerji kaynağı

Abstract

Researchers and industry are seeking to manage energy better by increasing the efficiency of the energy system because of the increasing importance of energy in recent years. For this reason, a shift towards alternative energy sources to provide electricity has begun. As for alternative energy sources, interest in renewable energy sources is increasing day by day. Solar, wind and thermal sources are the most prominent renewable energy sources. Today we use of thermal sources in greenhouse, fish breeding, thermal facilities, city heating and electricity production. Nowadays, it is known that when we move thermal water from the source to the place to be used, it can be converted into electrical energy by utilizing the heat it emits around it. In this study, the effects of the type of the material and the placement of the thermoelectric generator (TEG) on the efficiency of two Thermoelectric Modules (TEM) were investigated by using thermal sources from renewable energy sources. Hot and cold water was passed through the sandwich blocks which were made from Copper, Aluminum and Brass materials, and the power produced in TEG was analyzed. As TEG, TEC1-12706 and TEC1-12710 materials were used. As a result of experimental studies, it is observed that the type of the material that conveys thermal water and the order of transmission of hot/cold water through sandwich blocks have an effect on the power produced by both TEC1-12706 and TEC1-12710

Özet

Son zamanlarda enerjinin gittikçe artan öneminden dolayı, araştırmacılar ve sanayi, enerji sisteminin verimliliğini artırarak enerjiyi daha iyi yönetmek istemektedirler. Bu nedenle elektrik enerjisini sağlamak için alternatif enerji kaynaklarına yönelim başlamıştır. Alternatif enerji kaynaklarından ise yenilenebilir enerji kaynaklarına olan ilgi her geçen gün artmaktadır. Güneş, Rüzgâr ve Termal kaynaklar yenilenebilir enerji kaynaklarının öne çıkanlarıdır. Günümüzde termal kaynaklardan seracılık, balık yetiştirme, termal tesisler, şehir ısıtması ve elektrik üretimi gibi birçok alanda faydalanmaktayız. Günümüzde termal suyu kaynağından faydalandığımız yere taşırken, etrafına yaydığı ısıyı elektrik enerjisine dönüştürebileceğimiz bilinmektedir. Bu çalışmada yenilenebilir enerji kaynaklarından termal kaynaklar kullanılarak, elektrik üretiminde termal suyun taşındığı malzemenin türünün ve Termoelektrik Jeneratörün (TEG) yerleşim şeklinin farklı iki Termoelektrik Modülün (TEM) verimi üzerindeki etkisi incelenmiştir. Sıcak ve soğuk su Bakır, Alüminyum ve Pirinç malzemelerinden oluşturduğumuz sandviç bloklardan geçirilerek TEG’de üretilen güç üzerindeki analizi gerçekleştirilmiştir. TEG olarak da TEC1-12706 ve TEC1-12710 malzemeleri kullanılmıştır. Yapılan deneysel çalışmalar sonucunda termal suyun geçtiği malzemenin türünün ve sıcak/soğuk suyun sandviç plakalardan geçme sırasının hem TEC1-12706’nın hem de TEC1-12710’nun ürettiği güç üzerinde etkili olduğu görülmüştür.

🔖

Cite This Article

TERZİOĞLU, H., AĞAÇAYAK, A. (2020). ANALYSIS OF ELECTRICAL ENERGY IN THERMOELECTRIC GENERATOR IN SANDWICH DESIGN. Konya Journal of Engineering Sciences, Cilt: 8, 76–91. https://ajindex.com/articles/909121

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Ağaçayak, A. C., Neşeli, S., & YalçınG, T. H. (2017). The Impact of Different Electric Connection Types in Thermoelectric Generator Modules on Power. International Journal of Engineering Research & Science (IJOER), 3, 2395-6992.
  2. Ağaçayak, A. C., Terzioğlu, H., Neşeli, S., & Yalçin, G. (2019). Mathematical Modeling Of Thermoelectric Generator By Regression Analysis. Selçuk-Teknik Dergisi, 132-143.
  3. Ağaçayak, A.C., Terzioğlu, Çimen, Neşeli, Yalçın, (2018). "The Effects of Speed and Flow Rate on Power in Thermoelectric Generators", International Journal of Intelligent Systems and Applications in Engineering, Vol.6, pp.65-71.
  4. Akçay H. (2015). The conversion of heat lost in the exhaust and cooling system of a spark ignition engine fuelled with LPG to a usable energy via a TEJ module. M.Sc. Süleyman Demirel University, Isparta, Turkey. Champier, D. (2017). Thermoelectric generators: A review of applications. Energy Conversion and Management, 140, 167-181.
  5. Çimen, H., Ağaçayak, A. C., Neşeli, S., & Yalçin, G. (2017). Comparison of Two Different Peltiers Running as Thermoelectric Generator at Different Temperatures. Paper presented at the 2017 International Renewable and Sustainable Energy Conference (IRSEC). Demir, M. E., & Dincer, I. (2017). Performance assessment of a thermoelectric generator applied to exhaust waste heat recovery. Applied Thermal Engineering, 120, 694-707.
  6. He, W., Wang, S., & Yue, L. (2017). High net power output analysis with changes in exhaust temperature in a thermoelectric generator system. Applied Energy, 196, 259-267.
  7. Hossam A.G, C.A.Barry S, Derek S, Cole S, Thomas S, David N, Dominique P, Emmanuel B, (2017). Evaluation and optimization of thermoelectric generator network for waste heat utilization in nuclear power plants and non-nuclear energy applications. Annals of Nuclear Energy; 101: 454-464.
  8. Kaya, A. Y. (2010). Experimental research of thermoelectric system that worked by the heat on exhaust gas. M.Sc. Süleyman Demirel University, Isparta, Turkey. Khattab, N., & El Shenawy, E. (2006). Optimal operation of thermoelectric cooler driven by solar thermoelectric generator. Energy Conversion and Management, 47(4), 407-426.
  9. Kim, T. Y., Negash, A., & Cho, G. (2017). Direct contact thermoelectric generator (DCTEG): A concept for removing the contact resistance between thermoelectric modules and heat source. Energy Conversion and Management, 142, 20-27.
  10. Kushch, A. S., Bass, J. C., Ghamaty, S., & Eisner, N. (2001). Thermoelectric development a