Journals / Konya Journal of Engineering Sciences / 2022 / Cilt: 10 Sayı: 1

Carbonization of Hemp Waste and Obtaining Activated Carbon

KENEVİR ATIKLARININ KARBONİZASYONU VE AKTİF KARBON ELDESİ

Pages
29–39
Publication Date
2022-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to these results, it has been determined that it is possible to obtain activated carbon economically by carbonization and chemical activation of hemp waste.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this research, waste parts (root, stem and other) of hemp grown in Malatya Turgut Özal University Faculty of Agriculture were evaluated.
📊
Key Findings & Data:The total surface area (Stotal) of the carbonized hemp waste is 171.75 m2/g, the micropore area (Smicro) is 145.46 m2/g and the mesopore area (Smezo) is 26.29 m2/g.
💡
Conclusion & Impact:According to these results, it has been determined that it is possible to obtain activated carbon economically by carbonization and chemical activation of hemp waste.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kenevir atığı · Aktif karbon · Karbonizasyon

Abstract

In this research, waste parts (root, stem and other) of hemp grown in Malatya Turgut Özal University Faculty of Agriculture were evaluated. Activated carbon was obtained from hemp waste by using carbonization and chemical activation method and characterization experiments were carried out. Elemental (C, H, N, S) analysis, XRD, FTIR and SEM analyzes were performed to determine the characterization of the activated carbon samples. In addition, the surface area and porosity of activated carbons were determined by BET nitrogen adsorption surface area measurement. The total surface area (Stotal) of the carbonized hemp waste is 171.75 m2/g, the micropore area (Smicro) is 145.46 m2/g and the mesopore area (Smezo) is 26.29 m2/g. These values were calculated as 1881.80 m2/g, 1152.40 m2/g and 728.40 m2/g, respectively, inactivated carbon impregnated with KOH at a 1:4 ratio. The pore volume of 0.077 cm3/g in the carbonized product was determined as 0.8852 cm3/g in activated carbon. The average pore diameters (dp) of the carbonized product and activated carbon were determined as 1.78 nm and 1.88 nm, respectively. According to these results, it has been determined that it is possible to obtain activated carbon economically by carbonization and chemical activation of hemp waste.

Özet

Bu çalışmada; bilimsel çalışmalarda kullanılmak üzere Malatya Turgut Özal Üniversitesi Ziraat Fakültesi bünyesinde yetiştirilen kenevir bitkisinin atık kısımları (kök, gövde ve diğer) değerlendirilmiştir. Kenevir atıklarından karbonizasyon ile kimyasal aktivasyon yöntemi kullanılarak aktif karbon elde edilmiş ve karakterizasyon deneyleri gerçekleştirilmiştir. İlk olarak, kenevir atıklarının 100 ml/dk N2 gazı akışında, 1 saat süreyle, 500°C sıcaklıkta karbonizasyonu yapılmıştır. Karbonize edilmiş ürün, ağırlıkça farklı oranlarda (1:1, 1:2, 1:3 ve 1:4) KOH emdirilerek aktivasyon işlemi için hazırlanmıştır. Etüvde kurutulan ürünler daha sonra aktivasyona tabii tutulmuştur. Kimyasal aktivasyon işlemi 100 ml/dk N2 gazı akışında, 1 saat süreyle, 800°C’de gerçekleştirilmiştir. Daha sonra oda sıcaklığına soğutulan karışım fırından alınarak üzerine seyreltik HCl eklenerek, bir ısıtıcı yardımıyla ısıtma işlemi yapılmıştır. Soğuduktan sonra süzülerek, saf su ile klorür tepkimesi vermeyinceye kadar (AgNO3 testi ile) yıkanmıştır. Daha sonra etüve konarak, iyice kuruması sağlanmıştır. Etüvde kurutulan aktif karbon örneklerinin karakterizasyonunu belirlemek için elementel (C, H, N, S) analiz, XRD, FTIR ve SEM analizleri gerçekleştirilmiştir. Ayrıca, aktif karbonların BET azot adsorpsiyonu yüzey alanı ölçümü ile, yüzey alanı ve gözenekliliği belirlenmiştir. Karbonize edilmiş kenevir atığında toplam yüzey alanı (Stotal) 171,75 m2/g, mikrogözenek alanı (Smikro) 145,46 m2/g ve mezogözenek alanı (Smezo) 26,29 m2/g iken bu değerler 1:4 oranında KOH emdirilmiş aktif karbonda sırasıyla 1881,80 m2/g, 1152,40 m2/g ve 728,40 m2/g olarak hesaplanmıştır. Karbonize üründe 0,077 cm3/g olan gözenek hacmi, aktif karbonda 0,8852 cm3/g olarak belirlenmiştir. Karbonize ürün ve aktif karbonun ortalama gözenek çapları (dp) sırasıyla 1,78 nm ve 1,88 nm olarak belirlenmiştir.

🔖

Cite This Article

KORKMAZ, A. A., ÖNAL, Y. (2022). Carbonization of Hemp Waste and Obtaining Activated Carbon. Konya Journal of Engineering Sciences, Cilt: 10 Sayı: 1, 29–39. https://ajindex.com/articles/909009

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Chandra, T.C., Mirna, M.M., Sudaryanto, Y., Ismadji, S., 2007, “Adsorption of basic dye onto activated carbon prepared from durian shell: studies of adsorption equilibrium and kinetics”, Chemical Engineering Journal, Cilt 127, ss. 121–129.
  2. Dizbay-Onat, M., Vaidya, U.K., Balanay, J.A.G., Lungu, C.T., 2018, “Preparation and characterization of flax, hemp and sisal fiber-derived mesoporous activated carbon adsorbents”, Adsorption Science and Technology, Cilt 36, Sayı 1-2, ss. 441-457.
  3. Fierro, V., Torne-Fernandez, V., Celzard, A., 2006, “Kraft lignin as a precursor for microporous activated carbons prepared by impregnation with ortho-phosphoric acid: Synthesis and textural characterization”, Microporous and Mesoporous Materials, Cilt 92, Sayı 1-3, ss. 243-250.
  4. Gao, S., Ge, L., Rufford, T.E., Zhu, Z., 2017, “The preparation of activated carbon discs from tar pitch and coal powder for adsorption of CO2, CH4 and N2”, Microporous Mesoporous Mater., Cilt 238, ss. 19–26.
  5. Guan, Z., Guan, Z., Li, Z., Liu, J., Yu, K., 2019, “Characterization and preparation of nano-porous carbon derived from hemp stems as anode for lithium-ion batteries”, Nanoscale Research Letters, Cilt 14, Sayı 1, ss. 1-9.
  6. Hong, S.M., Choi, S.W., Kim, S.H., Lee, K.B., 2016, “Porous carbon based on polyvinylidene fluoride: enhancement of CO2 adsorption by physical activation”, Carbon, Cilt 99, ss. 354–360.
  7. Hossain, M.Z., Wu, W., Xu, W.Z., Chowdhury, M.B.I., Jhawar, A.K., Machin, D., Charpentier, P.A., 2018, “High-Surface-Area Mesoporous Activated Carbon from Hemp Bast Fiber Using Hydrothermal Processing”, Journal of Carbon Research, Cilt 4, Sayı 38, ss. 1-15.
  8. Ivanichok, N. Y., Budzuliak, I. M., Moiseienko, M. I., Lisovskiy, R. P., Rachii, B. I., Gamarnyk, A. M., Lisovska, S. A., 2020, “Electrochemical properties of nanoporous carbon materials obtained from raw materials of plant origin (hemp shives)”, Physics and Chemistry of Solid State, Cilt 21, Sayı 1, ss. 35-42.
  9. Jiang, X., Shi, G., Wang, G., Mishra, P., Liu, C., Dong, Y., Zhang, H., 2019, “A hydrothermal carbonization process for the preparation of activated carbons from hemp straw: an efficient electrode material for supercapacitor application”, Ionics, Cilt 25, Sayı 7, ss. 3299-3307.
  10. Jiang, X., Shi, G., Wang, G., Mishra, P., Du, J., Zhang, Y., 2020, “Fe2O3/hemp straw-based porous carbon composite for supercapacitor electrode materials”, Ionics, Cilt 26, ss. 4039-4051.
  11. Jibril, B., Houache, O., Al-Maamari, R., Al-Rashidi, B., 2008, “Effects of H3P