Journals / ALKÜ Fen Bilimleri Dergisi / 2021 / Cilt: 3 - Sayı: 2

Determination of the effect of different gravity methods on the removal of ash and sulfur from Arguvan lignite

Arguvan linyitinden kül ve kükürt uzaklaştırılmasında farklı gravite yöntemlerinin etkisinin belirlenmesi

Pages
64–81
Publication Date
2021-08-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Reichert spiral results showed that the ash content decreased from the lignite of 37.77% to 26.50% and the sulfur content from 3.85% to 2.08%.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study, it is aimed to find out the beneficiation of Malatya-Arguvan lignite by gravity methods.
📊
Key Findings & Data:It has been determined that lignite washability from washing curves is generally difficult but may be possible with controlled washing at a density of 1.68 g /cm3.
💡
Conclusion & Impact:Reichert spiral results showed that the ash content decreased from the lignite of 37.77% to 26.50% and the sulfur content from 3.85% to 2.08%.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Linyit · Falcon konsantratör · Reichert spiral

Abstract

This study, it is aimed to find out the beneficiation of Malatya-Arguvan lignite by gravity methods. First of all, the washability of lignite has been investigated with sink-float experiments. It has been determined that lignite washability from washing curves is generally difficult but may be possible with controlled washing at a density of 1.68 g /cm3. Then, to remove ash and sulfur from lignite by shaking table, spiral and Falcon concentrator tests were conducted. Clean coals are obtained from all other methods except Falcon were found to decrease in ash and sulfur content and increase in calorific value. Clean coals with the lowest ash and sulfur content were obtained with a spiral concentrator. Reichert spiral results showed that the ash content decreased from the lignite of 37.77% to 26.50% and the sulfur content from 3.85% to 2.08%. The calorific value increased from 2576 kcal/kg to 4590 kcal/kg. Arguvan lignite has very limited usage due to lower calorific value, high ash and sulfur content. Although enrichment has been carried out, it has been concluded that lignite needs to be further improved by using different methods.

Özet

Bu çalışmada gravite yöntemleriyle Malatya-Arguvan linyitinin zenginleştirilmesi amaçlanmıştır. Öncelikle, yüzdürme-batırma deneyleriyle linyitin yıkanabilirliği araştırılmıştır. Yıkama eğrilerinden linyitin yıkanabilirliğinin genel olarak zor olduğu, 1,68 g/cm3 yoğunlukta kontrollü olarak yıkanabileceği belirlenmiştir. Daha sonra, linyitten kül ve kükürdü uzaklaştırmak için sallantılı masa, spiral ve Falcon konsantratör deneyleri yapılmıştır. Falcon hariç diğer tüm yöntemlerden elde edilen temiz kömürde kül ve kükürt içeriğinin azalmış, kalorifik değer ise artmıştır. En düşük kül ve kükürt içeriğine sahip olan temiz kömürler spiral konsantratör ile elde edilmiştir. Reichert spirali sonuçları linyitteki kül içeriğinin %37,77’den %26,50’ye ve kükürt içeriğinin ise %3,85’den %2,08’e azalmış olduğunu göstermiştir. Kalorifik değer 2576 kcal/kg’dan 4590 kcal/kg’a yükselmiştir. Düşük kalorifik değeri, yüksek kül ve kükürt içeriği yüzünden Arguvan linyiti sınırlı bir kullanıma sahiptir. Her ne kadar zenginleştirme gerçekleşse de, farklı yöntemler kullanılarak linyitin daha da iyileştirilmesi gerektiği sonucuna varılmıştır.

🔖

Cite This Article

KORKMAZ, A. A. (2021). Determination of the effect of different gravity methods on the removal of ash and sulfur from Arguvan lignite. ALKÜ Fen Bilimleri Dergisi, Cilt: 3 - Sayı: 2, 64–81. https://ajindex.com/articles/733033

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Ceylan, K. and Küçük, M.Z. (2004), “Effectiveness of the dense medium and the froth flotation methods in cleaning some Turkish lignites”, Energy Conversion and Management 45, 1407-1418
  2. Ceylan, K. and Küçük, M.Z. (2004), “Effectiveness of the dense medium and the froth flotation methods in cleaning some Turkish lignites”, Energy Conversion and Management 45, 1407-1418
  3. Demir, U. (2017), “Characterization and desulfurization possibilities of high sulfur Gediz-Turkey coal”, Journal of Environmental Science and Engineering A 6, 31-38
  4. Demir, U. (2017), “Characterization and desulfurization possibilities of high sulfur Gediz-Turkey coal”, Journal of Environmental Science and Engineering A 6, 31-38
  5. Meshram, P., Purohit, B.K., Sinha, M.K., Sahu, S.K. and Pandey, B.D. (2015), “Demineralization of low grade coal – A review”, Renewable and Sustainable Energy Reviews 41, 745-761
  6. Meshram, P., Purohit, B.K., Sinha, M.K., Sahu, S.K. and Pandey, B.D. (2015), “Demineralization of low grade coal – A review”, Renewable and Sustainable Energy Reviews 41, 745-761
  7. Cheng, W., Yang, R., Zhang, Q., Luo, B. and Jia, Y. (2018), “Washability and distribution behaviors of trace elements of a high-sulfur coal, SW Guizhou, China”, Minerals 8.59, 1-15
  8. Cheng, W., Yang, R., Zhang, Q., Luo, B. and Jia, Y. (2018), “Washability and distribution behaviors of trace elements of a high-sulfur coal, SW Guizhou, China”, Minerals 8.59, 1-15
  9. Sivrikaya, O. (2014), “Cleaning study of a low-rank lignite with DMS, Reichert spiral and flotation”, Fuel 119, 252-258
  10. Sivrikaya, O. (2014), “Cleaning study of a low-rank lignite with DMS, Reichert spiral and flotation”, Fuel 119, 252-258
  11. Zhang, Q., Tian, Y., Qui, Y., Cao, J. and Xiao, T. (2011), “Study on the washability of the Kaitai coal, Guizhou Province China”, Fuel Processing Technology 92, 692-698
  12. Zhang, Q., Tian, Y., Qui, Y., Cao, J. and Xiao, T. (2011), “Study on the washability of the Kaitai coal, Guizhou Province China”, Fuel Processing Technology 92, 692-698
  13. Rahman, M., Pudasainee, D. and Gupta, R. (2017), “Review on chemical upgrading of coal: Production processes, potential applications and recent developments”, Fuel Processing Technology 158, 35-56
  14. Rahman, M., Pudasainee, D. and Gupta, R. (2017), “Review on chemical upgrading of coal: Production processes, potential applications and recent developments”, Fuel Processing Technology 158, 35-56
  15. Falconer, A. (2003), “Gravity sepa