Journals / Konya Journal of Engineering Sciences / 2023 / Cilt: 11 Sayı: 1

Investigation of Properties of Microcrystalline Cellulose and Apple Peel Incorporated Polylactic Acid Based Films

MİKROKRİSTALİN SELÜLOZ VE ELMA KABUĞU KATKILI POLİLAKTİK ASİT ESASLI FİLMLERİN ÖZELLİKLERİNİN İNCELENMESİ

Pages
180–190
Publication Date
2023-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The successful production of PLA biocomposite films indicated that they have potential to be used as environmental-friendly packaging materials.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Studies on the development of PLA-based biocomposite films have gained momentum in recent years.
📊
Key Findings & Data:In this study, apple peel (%0,5 w/w) and/or microcrystalline cellulose (%0,5 w/w) loaded polylactic acid based films were produced via solvent casting method.
💡
Conclusion & Impact:The successful production of PLA biocomposite films indicated that they have potential to be used as environmental-friendly packaging materials.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Polilaktik asit · Mikrokristalin selüloz · Polimer kompozit

Abstract

Studies on the development of PLA-based biocomposite films have gained momentum in recent years. In this study, apple peel (%0,5 w/w) and/or microcrystalline cellulose (%0,5 w/w) loaded polylactic acid based films were produced via solvent casting method. The effects of using the additives individually and together on the structural, mechanical and optical properties of the films were characterized by using FT-IR spectrophotometer, mechanical tester, thermogravimetric analyzer (TGA) and UV-3600 spectrophotometer, respectively. Additives showed good dispersion in the polymer matrix. The addition of additives increased the tensile strength and the flexibility of the neat PLA films, while slightly decreased the transparency. It was determined that the film with the highest tensile strength (41.36 ± 0.7 MPa) was the apple peel loaded PLA film. All the films had good thermal stability. When the apple peel and/or microcrystalline cellulose loaded films were compared with the pure PLA film, it was determined that there was no change on thermal degradation behavior of the films. The successful production of PLA biocomposite films indicated that they have potential to be used as environmental-friendly packaging materials.

Özet

Bu çalışmada çözelti döküm yöntemi ile elma kabuğu ve/veya mikrokristalin selüloz katkılı polilaktik asit esaslı filmler üretildi. Filmlerin yapısal, mekanik ve optik özellikleri karakterize edildi. Katkı maddelerinin eklenmesi, saf PLA filmlerin çekme dayanımı ve esnekliğini arttırırken, şeffaflığını biraz azalttı. PLA biyokompozit filmlerinin başarılı üretimi, çevre dostu ambalaj malzemeleri olarak kullanılma potansiyeline sahip olduklarını gösterdi.

🔖

Cite This Article

TERZİOĞLU, P., TOHUMCU, K. C. (2023). Investigation of Properties of Microcrystalline Cellulose and Apple Peel Incorporated Polylactic Acid Based Films. Konya Journal of Engineering Sciences, Cilt: 11 Sayı: 1, 180–190. https://ajindex.com/articles/908935

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. P. Dhar, D. Tarafder, A. Kumar, and V. Katiyar, “Thermally recyclable polylactic acid/cellulose nanocrystal films through reactive extrusion process,” Polymer, vol. 87, pp. 268-282, 2016
  2. C. G. Li, W. G. Peng, Y. X. Li, P. F. Xu, W. Tian, and R. Zhang, “ Thermal and mechanical properties of bagasse microcrystalline cellulose reinforced PLA composites,” Advanced Materials Research, vol. 284, pp. 1786-1789
  3. R. D. Kale, V. G. Gorade, N. Madye, B. Chaudhary, P. S. Bangde, and P. P. Dandekar, “Preparation and characterization of biocomposite packaging film from poly(lactic acid) and acylated microcrystalline cellulose using rice bran oil,” International Journal of Biological Macromolecules, vol. 118, no. Part A, pp. 1090-1102, 2018
  4. M. P. Arrieta, J. López, S. Ferrándiz, and M. A. Peltzer, “Characterization of PLA-limonene blends for food packaging applications,” Polymer Testing, vol. 32, no. 4, pp. 760-768, 2013
  5. A. Bartos, K. Nagy, J. Anggono, A. H. Purwaningsih, J. Móczó, and B. Pukánszky, “ Biobased PLA/sugarcane bagasse fiber composites: Effect of fiber characteristics and interfacial adhesion on properties,” Composites Part A: Applied Science and Manufacturing, vol. 143, pp. 106273,2021
  6. F.A.D. Santos, G.C.V. Iulianelli, and M. I.B. Tavares, “Effect of microcrystalline and nanocrystals cellulose fillers in materials based on PLA matrix,” Polymer Testing, vol. 61, pp. 280-288,2017
  7. M.T. Zafar, S.N. Maiti, and A.K. Ghosh, “Effect of surface treatments of jute fibers on the microstructural and mechanical responses of poly(lactic acid)/jute fiber biocomposites,” RSC Advances, vol. 6, pp. 73373-73382, 2016
  8. B. Asaithambi, G. Ganesan, and S. Ananda Kumar, “Bio-composites: Development and mechanical characterization of banana/sisal fibre reinforced poly lactic acid (PLA) hybrid composites,” Fibers and Polymers, vol. 15, pp. 847–854, 2014
  9. U. K. Komal, M. K. Lila, and I. Singh, “Processing of PLA/pineapple fiber based next generation composites,” Materials and Manufacturing Processes, vol. 36, no. 14, pp.1677-1692, 2021
  10. J. Y. Jang, T. K. Jeong, H. J. Oh, J. R. Youn, and Y. S. Song, “Thermal stability and flammability of coconut fiber reinforced poly(lactic acid) composites,” Composites Part B: Engineering, vol. 43, no. 5, pp. 2434-2438, 2012
  11. H.P.S. Abdul-Khalil, T.K. Lai, Y.Y. Tye, M. T. Paridah, M. R. Nurul Fazita, A. A. Azniwati, R. Dungani, and S. Rizal, “Preparation and Characterization of Microcrystalline Cellu