Journals / Ergonomi / 2021 / Cilt: 4 Sayı: 2

INVESTIGATION OF COMFORT ANGLES BY USING THE IMAGING METHOD

OTOMOTİV KULLANICILARINDA GÖRÜNTÜLEME YÖNTEMİ KULLANILARAK KONFOR AÇILARININ ARAŞTIRILMASI

Journal
Ergonomi
Pages
97–106
Publication Date
2021-08-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Research findings indicate that there are strains in the lumbar spine (L4-L5), cervical spine (C6-C7), and that the comfort angles of female drivers are narrower than their male counterparts.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:With the development of highway networks and the increase in automotive use in our country and in the world, the time spent in automotive vehicles has increased compared to the past.
📊
Key Findings & Data:Extensive literature conducted by automotive companies and academicians, aimed to improve product ergonomics, and increase the quality of life.
💡
Conclusion & Impact:Research findings indicate that there are strains in the lumbar spine (L4-L5), cervical spine (C6-C7), and that the comfort angles of female drivers are narrower than their male counterparts.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Duruş analizi · Otomotiv ergonomisi · Kas ve iskelet sistemi

Abstract

With the development of highway networks and the increase in automotive use in our country and in the world, the time spent in automotive vehicles has increased compared to the past. Prolonged driving causes difficulties in the musculoskeletal system. Extensive literature conducted by automotive companies and academicians, aimed to improve product ergonomics, and increase the quality of life. These studies assessed comfort angles in automotive use and addressed driver comfort in high traffic. In our study, different body angles were examined by creating a skeleton model. This model represents automotive users who drive on a daily basis. Angles were calculated by BTS Bio-Engineering software. Four participants were chosen from a group of 30 drivers to represent diverse daily drivers. The study was conducted at the Mix Reality Lab of Oklahoma State University. Research findings indicate that there are strains in the lumbar spine (L4-L5), cervical spine (C6-C7), and that the comfort angles of female drivers are narrower than their male counterparts.

Özet

Ülkemizde ve Dünya’da karayolu ağlarının gelişmesi ve otomotiv kullanımının artmasıyla otomotiv içinde insanların geçirmiş olduğu süre geçmişe kıyasla daha da artmıştır. Otomotiv içinde geçirilen sürenin artması, kas ve iskelet sisteminde zorlanmaları da beraberinde getirmektedir. Literatür incelendiğinde otomotiv firmaları ve akademisyenler tarafından ürün ergonomilerini geliştirilmesi ve yaşam kalitesinin yükseltilmesi için yapılan pek çok çalışmaya rastlanılmaktadır. Bu çalışmalar, otomotiv kullanımında oturuştaki konfor açılarının hesaplanmasını ve kullanıcıların trafikte yola daha iyi hakim olmalarını hedeflemektedir. Bu çalışmada ise günlük hayattaki farklı senaryolar üzerinden, otomotiv kullanıcılarının oluşturduğu farklı vücut pozisyonlarının eklem açıları, kullanılan referans noktalarıyla yaratılan iskelet modeli üzerinden incelenmektedir. Açılar BTS Bio-Engineering vücut görüntüleme teknolojisi ile hesaplanmıştır. Çalışma kapsamında 4 adet otomotiv kullanıcısı 30 kişilik topluluk içinden seçilmiş ve seçilen kişilerin farklı grupları temsil etmesi hedeflenmiştir. Araştırma Oklahoma State Üniversitesi Mixed Reality Araştırma Lab.’da yapılmıştır. Araştırma bulgularına göre L4-L5 ve C6-C7 bölgesinde zorlanmalar olduğu ve kadın kullanıcıların otomotiv kullanması esnasında oluşan konfor açılarının erkek kullanıcılara göre daha dar açılar olduğu tespit edilmiştir.

🔖

Cite This Article

ÜLKER, O., ALTİN, M. A., DERAFSHİ, M. H. (2021). INVESTIGATION OF COMFORT ANGLES BY USING THE IMAGING METHOD. Ergonomi, Cilt: 4 Sayı: 2, 97–106. https://ajindex.com/articles/904976

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Andreoni, G., Rabuffetti, M., Pedotti, A., Quattrocolo, S., Cerrone, M., & Tarzia, A. (1999). Accessibility Simulation and Ergonomic Evaluation for Virtual Prototyping (No. 1999-01-1925).
  2. SAE Technical Paper. Chaffin, D.B. & Andersson. G.B., (1991). Occupational Biomechanics. 2nd ed. Wiley, New York, USA. DIN 33408-1:2008-03, Körperumrissschablonen - Teil 1: Für Sitzplätze Eldem, C., Neslihan, T. O. P., Şahin, H. (2019). Dijital insan modelleri kullanarak otomobil sürücüsü duruş pozisyonlarının ergonomik değerlendirilmesi üzerine bir çalışma. Gazi Mühendislik Bilimleri Dergisi (GMBD), 5(1), 22-31.
  3. Graf, M., Guggenbühl, U., Krueger, H. (1995). An assessment of seated activity and postures at five workplaces. International Journal of Industrial Ergonomics, 15(2), 81-90.
  4. Grieco, A. (1998). Application of the concise exposure index (OCRA) to tasks involving repetitive movements of the upper limbs in a variety of manufacturing industries: preliminary validations. Ergonomics, 41(9), 1347-1356.
  5. Guenaelle, P. (1995, March). One methodology to evaluate automotive seat comfort. In Proceedings of the Third International Conference on Vehicle Comfort and Ergonomics, Bologna, Italy (pp. 29-31).
  6. Gyi, D. E., Porter, J. M., Robertson, N. K. (1998). Seat pressure measurement technologies: considerations for their evaluation. Applied Ergonomics, 29(2), 85-91.
  7. Huang, Y. H., Robertson, M. M. Chang, K. I., (2004). The role of environmental control on environmental satisfaction, communication, and psychological stress: effects of office ergonomics training. Environment and Behavior, 36(5), 617-637.
  8. Kamp, I. (2012). The influence of car-seat design on its character experience. Applied ergonomics, 43(2), 329-335.
  9. Kaya, Ö., Akalp, G. (2017). İş sağlığı ve güvenliği açısından elle taşıma işlerinin değerlendirilmesi (tekstil ve otomotiv sektörü örneği). Is, Güc: Endüstri Iliskileri ve Insan Kaynaklari Dergisi, 19(2), 79-90.
  10. Kaya, Ö., Özok, A. F. (2017). Tasarımda antropometrinin önemi. Mühendislik Bilimleri ve Tasarım Dergisi, 5, 309-316.
  11. Kuebler, T., Wirsching, H., Barnes, D. (2018). Ramsis-Digital Human Modeling for Optimized Safety and Survivability of the Warfighter. Latko, W. A., Armstrong, T. J., Franzblau, A., Ulin, S. S., Werner, R. A. Albers, J. W., (1999). Cross‐Sectional Study Of The Relationship Between Repetitive Work and The Prevalence of Upper Limb Musculoskeletal Disorders. American Journal of İndustrial Medicine, 36(2), 248-259.
  12. Lay, W. E., & Fisher, L. C. (1940). R