SavedAdd your journal

Journals / Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2023 / Cilt: 27 - Sayı: 1

Investigation of Martensitic Phase Transformation and Magnetic Properties of Fe-30%Ni-2.6wt%Mo-X%Co Alloys

Fe-30%Ni-%2.6Mo-X%Co Alaşımlarının Martensitik Faz Dönüşümünün ve Manyetik Özelliklerinin Araştırılması

Erdem YAŞAR
Osman ARMAĞAN
Talip KIRINDI
Merve Sultan AKAY AĞIR
Pages
27–32
Publication Date
2023-04-25
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, by using Mössbauer spectroscopy, it was shown that the amount of martensite increased with the increase of Co amount and the magnetic order of the alloy changed accordingly.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the microstructure of thermal effective martensitic phase transformation observed in the Fe-30wt.%Ni-2.6wt.%Mo-Xwt.%Co (X = 0.8, 1.8) alloy was investigated morphologically and crystallographically by using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM).
📊
Key Findings & Data:In addition to this, nano martensite formation was also observed as another effect of Co addition (figure 2c, d).
💡
Conclusion & Impact:Also, by using Mössbauer spectroscopy, it was shown that the amount of martensite increased with the increase of Co amount and the magnetic order of the alloy changed accordingly.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Termal etkili martensit · Kristalografik özellikler · Manyetik özellikler

Abstract

In this study, the microstructure of thermal effective martensitic phase transformation observed in the Fe-30wt.%Ni-2.6wt.%Mo-Xwt.%Co (X = 0.8, 1.8) alloy was investigated morphologically and crystallographically by using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). In SEM studies, it was observed that the morphology of the martensite phase changed from lath and lenticular structure to massive structure with the addition of Co to the alloy. In addition to this, nano martensite formation was also observed as another effect of Co addition (figure 2c, d). Properties of lenticular martensite, electron diffraction pattern of austenite and martensite structures were given by TEM studies. According to the Differential Scanning Calorimetry (DSC) analysis, it was determined that the martensitic transformation temperature (Ms) significantly increased with the increase of the Co amount in the alloys. Also, by using Mössbauer spectroscopy, it was shown that the amount of martensite increased with the increase of Co amount and the magnetic order of the alloy changed accordingly.

Özet

Bu çalışmada, Fe-30%Ni-2.6%Mo-X%Co (X = 0.8, 1.8 ) alaşımında gözlenen termal etkili martensitik faz dönüşümünün mikro yapısı, taramalı elektron mikroskobu (SEM) ve geçirmeli elektron mikroskobu (TEM) kullanılarak morfolojik ve kristalografik olarak incelenmiştir. SEM çalışmalarında, alaşıma Co eklenmesiyle martensit fazın morfolojisinin iğnemsi ve merceksi yapıdan masif yapıya dönüştüğü gözlenmiştir. Bununla birlikte Co ilavesinin diğer bir etkisi olarak nano martensit oluşumu da görülmüştür (figure 2c, d). Lentiküler martensitin özellikleri, östenit ve martensit yapılarının elektron kırınım modeli TEM incelemeleri ile verilmiştir. Diferansiyel Taramalı Kalorimetre (DSC) analizlerine göre, alaşımlardaki Co miktarının artmasıyla martensitik dönüşüm sıcaklığının (Ms) önemli ölçüde arttığı belirlenmiştir. Ayrıca Mössbauer spektroskopisi kullanılarak Co miktarının artmasıyla martensit miktarının arttığı ve alaşımın manyetik düzeninin buna bağlı olarak değiştiği gösterilmiştir

🔖

Cite This Article

YAŞAR, E., ARMAĞAN, O., KIRINDI, T., AĞIR, M. S. A. (2023). Investigation of Martensitic Phase Transformation and Magnetic Properties of Fe-30%Ni-2.6wt%Mo-X%Co Alloys. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 27 - Sayı: 1, 27–32. https://ajindex.com/articles/888566

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Maki T. 1990. Microstructure and Mechanical Behavior of Ferrous Martensite. Materials Science Forum, 56–58(1), 157–168. Doi:10.4028/www.scientific.net/MSF.56-58.157 [2] Maki T., Shimooka S., Fujiwara S. and Tamura I. 1975. Formation Temperature and Growth Behavior of Thin Plate Martensite in Fe-Ni-C Alloys. Materials Transactions JIM, 16(1), 35-41. Doi:0.2320/matertrans1960.16.35 [3] Shibata A., Murakami T., Morito S., Furuhara T., Maki T. 2008. The Origin of Midrib in Lenticular Martensite. Materials Transactions, 49(6), 1242-1248. Doi:10.2320/matertrans.MRA2007296 [4] Yaşar E., Erdem U., Tuna M. A., Armağan O. and Kırındı T. 2018. The Effect of Ti Content on α’ Martensite Phase Transformation, and Magnetic Properties by Mossbauer Spectroscopy in Fe–30%Ni–X%Ti (wt%) Alloys. Acta Physica Polonica A, 133(4), 497-501. Doi: 10.12693/APhysPolA.133.1165 [5] Patterson R. L., Wayman G. M. 1966. The Crystallography and Growth of Partially-Twinned Martensite Plates in Fe-Ni Alloys. Acta Metallurgica, 14(3), 347-369. Doi: 10.1016/0001-6160(66)90094-0 [6] Tanaka Y., Himuro Y., Omori T., Sutou Y., Kainuma R., et al. 2006. Martensitic Transformation and Shape Memory Effect in Ausaged Fe–Ni–Si–Co Alloys. Materials Science and Engineering A, 438-440(2), 1030-1035. Doi: 10.1016/ j.msea. 2006.02.103 [7] Shibata A., Morito S., Furuhara T., Maki T. 2009. Substructures of Lenticular Martensites with Different Martensite Start Temperatures in Ferrous Alloys. Acta Materialia, 57(2), 483-492. Doi:10.1016/j.actamat.2008.09.030 [8] Yasar E., Gungunes H., Kilic A., Durlu T. N. 2006. Effect of Mo on the Magnetic Properties of Martensitic Phase in Fe–Ni–Mo Alloys. Journal of Alloys and Compounds, 424, 51–54. Doi:10.1016/j.jallcom.2005.12.075 [9] Takaki S., Nakatsu H., Tokunaga Y. 1993. Effects of Austenite Grain Size on ε Martensitic Transformation in Fe-15mass%Mn Alloy. Materials Transactions JIM, 34(6), 489-495. Doi:10.2320/matertrans1989.34.489 [10] Maki T., Tamura I. 1984. On the Thin Plate Martensite in Ferrous Alloys and It's Various Properties. Bulletin of the Japan Institute of Metals, 23(4), 229-237. Doi:10.2320/materia1962.23.229 [11] Maki T., Wayman C. M. 1976. Substructure of Ausformed Martensite in Fe-Ni and Fe-Ni-C Alloys. Metallurgical Transactions A, (7), 1511–1518. Doi:10.1007/BF02656393 [12] Shibata A., Furuhara T., Maki T. 2010. Interphase Boundary Structure and Accommodation Mechanism of Lenticular Martensite in Fe–Ni Alloys. Acta Materialia, 58(9), 3477-3492.