Journals / Hacettepe Journal of Biology and Chemistry / 2023 / Cilt: 51 - Sayı: 2

Effects of Silica/Clay Nanoparticles on Microstructural and Mechanical Properties of Epoxy Based Adhesives

Pages
153–161
Publication Date
2023-04-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is also concluded that the dispersion quality is a key to improve the strength by shifting the failure mechanism from adhesion to cohesion type.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Improving the mechanical properties of the epoxy-based adhesives with nanoparticles is one of the methods which justifies the use of adhesive joints significantly.
📊
Key Findings & Data:It was observed that the use of just 1 wt.% NCPs or 2 wt.% NSPs improve the failure load significantly whereas the combination of both particles generally leads to large agglomerations.
💡
Conclusion & Impact:It is also concluded that the dispersion quality is a key to improve the strength by shifting the failure mechanism from adhesion to cohesion type.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:mechanical properties · adhesive · nano silica

Abstract

Improving the mechanical properties of the epoxy-based adhesives with nanoparticles is one of the methods which justifies the use of adhesive joints significantly. This work studies the strength of adhesively bonded single-lap joints (SLJs) considering the pure adhesive, the reinforced adhesive with nano-silica particles (NSPs), nano-clay particles (NCPs), and a combination of both nano particles. Uniaxial tensile testing of the SLJs was conducted to reveal the failure loads of the joints and their elongations at failure. Furthermore, Scanning electron microscope (SEM) images and X-ray Diffraction (XRD) Analyses were used to investigate dispersion quality. It was observed that the use of just 1 wt.% NCPs or 2 wt.% NSPs improve the failure load significantly whereas the combination of both particles generally leads to large agglomerations. It is also concluded that the dispersion quality is a key to improve the strength by shifting the failure mechanism from adhesion to cohesion type.

🔖

Cite This Article

DİZECİ, Ş., KANDEMİR, A. C. (2023). Effects of Silica/Clay Nanoparticles on Microstructural and Mechanical Properties of Epoxy Based Adhesives. Hacettepe Journal of Biology and Chemistry, Cilt: 51 - Sayı: 2, 153–161. https://ajindex.com/articles/886272

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. da Silva, L.F.M., A. Öchsner, and R.D. Adams, Handbook of Adhesion Technology. 2018: Springer International Publishing
  2. Adams, R.D., and N.A. Peppiatt, Stress analysis of adhesive-bonded lap joints. Journal of Strain Analysis, 1974. 9(3): p. 185-196
  3. Paygozar, B., S.A. Dizaji, and L.F.M. da Silva, Bonding dissimilar materials via adhesively bonded spot-welded joints: cohesive zone model technique. Journal of Adhesion Science and Technology, 2020: p. 1-12
  4. Jojibabu, P., Y.X. Zhang, and B.G. Prusty, A review of research advances in epoxy-based nanocomposites as adhesive materials. International Journal of Adhesion and Adhesives, 2020. 96: p. 102454
  5. Khalili, S.M.R., et al., Numerical study of lap joints with composite adhesives and composite adherends subjected to in-plane and transverse loads. International Journal of Adhesion and Adhesives, 2008. 28(8): p. 411-418
  6. Nemati Giv, A., et al., Effect of reinforcements at different scales on mechanical properties of epoxy adhes ives and adhesive joints: a review. The Journal of Adhesion, 2018. 94(13): p. 1082-1121
  7. Wang, Z., et al., Bonding strength and water resistance of starch-based wood adhesive improved by silica nanoparticles. Carbohydrate Polymers, 2011. 86(1): p. 72-76
  8. Nassar, S.A., et al., Effect of Adhesive Nanoparticle Enrichment on Static Load Transfer Capacity and Failure Mode of Bonded Steel–Magnesium Single Lap Joints. Journal of Manufacturing Science and Engineering, 2015. 137(5)
  9. Hassanifard, S. and B. Paygozar, Investigation of an Optimum Concentration for Nano-Silica Used as an Adhesive Bonding Strength Enhancer. Journal of Failure Analysis and Prevention, 2018. 18(2): p. 315-321
  10. Paygozar, B. and M.A. Saeimi Sadigh, Adhesively Bonded Aluminum Double-Strap Joints Improved by Nano-silica. Transactions of the Indian Institute of Metals, 2020. 73(5): p. 1401-1406
  11. Ayatollahi, M.R., et al., Mechanical properties of adhesively single lap-bonded joints reinforced with multi-walled carbon nanotubes and silica nanoparticles. The Journal of Adhesion, 2017. 93(11): p. 896-913
  12. Shettar, M., et al., Experimental investigation on mechanical and wear properties of nano clay–epoxy composites. Journal of Materials Research and Technology, 2020. 9(4): p. 9108-9116
  13. Ahmadi, Z., Nanostructured epoxy adhesives: A review. Progress in Organic Coatings, 2019. 135: p. 449-453
  14. Khalili, S.M.R., M. Tavakolian, and A. Sarabi, Mechanical Properties of Nanoclay Reinforced Ep