Journals / Fabad Eczacılık Bilimler Dergisi / 2023 / Cilt: 48 - Sayı: 1

Development and Validation of an HPLC Method for Simultaneous Determination of Miconazole Nitrate and Chlorhexidine Digluconate in Chitosan-Based Gel Formulations

Pages
75–90
Publication Date
2023-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A new validated HPLC method was developed for simultaneous determination of CHX and MN in chitosan-based gels, with 98 to 102% recovery, without any interference with the excipients.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Miconazole nitrate (MN) and chlorhexidine digluconate (CHX) are the commonly used antimicrobials for topical treatment of dermal infections.
📊
Key Findings & Data:HPLC conditions such as mobile phase, flow rate, run time, column temperature and wavelength were explored.
💡
Conclusion & Impact:A new validated HPLC method was developed for simultaneous determination of CHX and MN in chitosan-based gels, with 98 to 102% recovery, without any interference with the excipients.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:HPLC method · simultaneous analysis · miconazole nitrate

Abstract

Miconazole nitrate (MN) and chlorhexidine digluconate (CHX) are the commonly used antimicrobials for topical treatment of dermal infections. Combination of antimicrobials has been investigated to enhance the efficacy of the treatment. Gel formulations based on bioadhesive polymers are preferred for delivery of these drugs. Chitosan is a promising bioadhesive polymer due to its penetration enhancing, antimicrobial and tissue healing properties. Yet, most of the gel-based formulations present analytical challenges during testing the drug content. It was aimed to develop an HPLC method for simultaneous determination of MN and CHX in chitosan-based gel formulations. Different solvent combinations were investigated for extraction of drugs from the gels. HPLC conditions such as mobile phase, flow rate, run time, column temperature and wavelength were explored. The method was validated according to ICH guideline Q2(R1). MN and CHX were extracted in solvent composition same with the mobile phase. The method was employed on ACE-C8 column at 40°C by isocratic elution using the mobile phase consisting of methanol:phosphate (75:25 v/v) buffer (containing triethylamine). Flow rate was 1 mL/min. The drugs were detected at 254 nm (CHX) and 230 nm (MN). Linearity was obtained between 5 to 80 μg/mL for both drugs. LOD and LOQ obtained for CHX was 1.61 and 1.06, for MN: 4.87 and 3.21 µg/mL, respectively. A new validated HPLC method was developed for simultaneous determination of CHX and MN in chitosan-based gels, with 98 to 102% recovery, without any interference with the excipients.

🔖

Cite This Article

TÜRKMEN, E., PARMAKSIZ, S., ÇELEBİER, M., ŞENEL, S. (2023). Development and Validation of an HPLC Method for Simultaneous Determination of Miconazole Nitrate and Chlorhexidine Digluconate in Chitosan-Based Gel Formulations. Fabad Eczacılık Bilimler Dergisi, Cilt: 48 - Sayı: 1, 75–90. https://ajindex.com/articles/884220

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Abdelrahman, M. M., Naguib, I., Nagieb, H. M., & Zaazaa, H. E. (2017). Different spectrophotometric methods for determination of miconazole nitrate and hydrocortisone in bulk and in topical pharmaceutical preparation without prior separation. Chem Res J, 2(2), 56-65.
  2. Abdelrahman, M. M., Naguib, I. A., Elsayed, M. A., & Zaazaa, H. A. (2016). Spectrophotometric Methods for Quantitative Determination of Chlorhexidine Gluconate and its Major Impurity, Metabolite and Degradation Product: Para-chloro-aniline. Anal Chem Lett, 6(3), 232-248. doi:https://doi.org/10.1080/22297928.2016.1196148
  3. Abtheen, K. S. S. A., Maheswari, R., Shanmugasundaram, P., & Vijeyaanandhi, M. (2008). Simultaneous estimation of chlorhexidine gluconate, metronidazole, lignocaine hydrochloride and triamcinolone acetonide in combined dosage form by RP-HPLC. Asian J Chem, 20(2), 1130-1136. Retrieved from https://www.scopus.com/inward/record.uri?eid=2-s2.0-53949098973&partnerID=40&md5=63af943945eaed54876a38068fa49367
  4. Al-Badr, A. A. (2005). Miconazole Nitrate: Comprehensive Profile. In H. G. Brittain (Ed.), Profiles of Drug Substances, Excipients and Related Methodology (pp. 3-65):
  5. Academic Press.
  6. Ammara, S., Syed, H. K., Sajid, A., Muhammad, I., Ikram, u. K., Akhtar, R.,. Khizar, A. (2018). Miconazole Nitrate Microemulsion: Preparation, Characterization and Evaluation for Enhancement of Antifungal Activity. Lat Am J Pharm, 37, 1578-1586.
  7. Atiyeh, B. S., Dibo, S. A., & Hayek, S. N. (2009). Wound cleansing, topical antiseptics and wound healing. Int Wound J, 6(6), 420-430. doi:https://doi.org/10.1111/j.1742-481X.2009.00639.x
  8. Belal, T. S., & Haggag, R. S. (2012). Gradient HPLC-DAD stability indicating determination of miconazole nitrate and lidocaine hydrochloride in their combined oral gel dosage form. J Chromatogr Sci, 50(5), 401-409. doi:https://doi.org/10.1093/chromsci/bms019
  9. Borissova, R., & Mandjukova, S. (1997). Titrimetric and spectrophotometric determination of chlorhexidine digluconate in tooth pastes. Fresenius J Anal Chem, 357(7), 977-980. doi:https://doi.org/10.1007/s002160050285
  10. Bouckaert, S., & Remon, J. P. (1993). In-vitro bioadhesion of a buccal, miconazole slow-release tablet. J Pharm Pharmacol, 45(6), 504-507. doi:https://doi.org/10.1111/j.2042-7158.1993.tb05588.x
  11. Brookes, Z. L. S., Bescos, R., Belfield, L. A., Ali, K., & Roberts, A. (2020). Current uses of chlorhexidine for management of oral disease: a narrative review. J Dent, 103, 103497. doi:https://doi.org/10.1016/j.jd