Journals / El-Cezeri / 2023 / Cilt: 10 - Sayı: 1

Experimental Investigation of Effects of the Nucleating Agent on Mechanical and Crystallization Behavior of Injection-Molded Isotactic Polypropylene

Çekirdekleştirici Ajanın Enjeksiyonla Kalıplanmış İzotaktik Polipropilenin Mekanik ve Kristalizasyon Davranışı Üzerindeki Etkilerinin Deneysel Olarak İncelenmesi

Journal
El-Cezeri
Pages
109–120
Publication Date
2023-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results demonstrated that NA/i-PP exhibited significantly improved mechanical performance compared to neat i-PP.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, we investigated the effect of talc (magnesium-silicate-monohydrate/3MgO.4SiO2.H2O) nucleating agent (NA) on the thermal and mechanical properties of isotactic-polypropylene (i-PP) at loadings ranging from 0.5 to 5% by weight using the melt compounding method.
📊
Key Findings & Data:The results demonstrated that NA/i-PP exhibited significantly improved mechanical performance compared to neat i-PP.
💡
Conclusion & Impact:Besides these, the use of various additives between talc and i-PP matrix that can improve interface features are expected to be an alternative approach to the new i-PP design with much higher mechanical and thermal properties.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:polipropilen · kristalizasyon · çekirdekleştirici ajan

Abstract

In this study, we investigated the effect of talc (magnesium-silicate-monohydrate/3MgO.4SiO2.H2O) nucleating agent (NA) on the thermal and mechanical properties of isotactic-polypropylene (i-PP) at loadings ranging from 0.5 to 5% by weight using the melt compounding method. The results demonstrated that NA/i-PP exhibited significantly improved mechanical performance compared to neat i-PP. In addition, the influence of the concentration of the NA on the melting and crystallization behavior of neat i-PP was also analyzed through DSC curves. The tensile and flexural properties of i-PP enhanced as NA concentration increased. Furthermore, scanning electron microscopy revealed that there is a significant difference in the fracture surface between the NA/i-PP and the i-PP matrix. Consequently, it was determined that the NA (talc) used in this study was a good NA for i-PP, improved the mechanical and thermal properties of the product, affected the crystallization properties and the microstructure, and reduced the mold cycle time. Besides these, the use of various additives between talc and i-PP matrix that can improve interface features are expected to be an alternative approach to the new i-PP design with much higher mechanical and thermal properties.

Özet

Bu çalışmada, talk (magnezyum-silikat-monohidrat/3MgO.4SiO2.H2O) çekirdekleştirici ajanın (NA) izotaktik-polipropilenin (i-PP) termal ve mekanik özellikleri üzerindeki etkisi eriyik harmanlama yöntemi kullanılarak %0,5 ile %5 arasında değişen katkı oranlarına göre incelendi. Sonuçlar, NA/i-PP'nin saf i-PP'ye oranla önemli ölçüde geliştirilmiş mekanik performans sergilediğini gösterdi. Ek olarak, saf i-PP'nin erime ve kristalleşme davranışı üzerindeki NA konsantrasyonunun etkisi de DSC eğrileri aracılığıyla analiz edildi. NA konsantrasyonu arttıkça i-PP'nin gerilme ve eğilme özellikleri arttı. Ayrıca, taramalı elektron mikroskobu, NA/i-PP ve i-PP matrisi arasında kırılma yüzeyinde önemli bir fark olduğunu ortaya çıkardı. Sonuç olarak, bu çalışmada kullanılan NA'nın (talk) i-PP için iyi bir NA olduğu, ürünün mekanik ve termal özelliklerini iyileştirdiği, kristalleşme özelliklerini ve mikro yapıyı etkilediği ve kalıp çevrim süresini azalttığı belirlendi. Bunların yanı sıra, talk ile i-PP matrisi arasında arayüz özelliklerini iyileştirebilecek çeşitli katkı maddelerinin kullanılmasının, mekanik ve termal özellikleri çok daha yüksek olan yeni i-PP tasarımına alternatif bir yaklaşım olması beklenmektedir.

🔖

Cite This Article

KANDEMİR, M., KARAGÖZ, İ., SEPETÇİOĞLU, H. (2023). Experimental Investigation of Effects of the Nucleating Agent on Mechanical and Crystallization Behavior of Injection-Molded Isotactic Polypropylene. El-Cezeri, Cilt: 10 - Sayı: 1, 109–120. https://ajindex.com/articles/879628

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Cui, L., Wang, P., Zhang, Y., Zhang, L., Chen, Y., Wang, L., et al. Combined effect of α-nucleating agents and glass fiber reinforcement on a polypropylene composite: A balanced approach. RSC Advances. 2017;7(68):42783-91. https://doi.org/10.1039/C7RA08322J
  2. Dotson, D.L., Nygard, P., A novel nucleating agent for polyethylene. Milliken & Company; 2011.
  3. Yu, Y., Zeng, F., Chen, J., Kang, J., Yang, F., Cao, Y., et al. Effects of ordered structure on non-isothermal crystallization kinetics and subsequent melting behavior of β-nucleated isotactic polypropylene/graphene oxide composites. J. Therm. Anal Calorim. 2019;136(4):1667-78. https://doi.org/10.1007/s10973-018-7776-8
  4. Xu, T., Lei, H., Xie, C. The effect of nucleating agent on the crystalline morphology of polypropylene (PP). Mater. Des. 2003;24(3):227-30. https://doi.org/10.1016/S0261-3069(02)00129-2 Kučerová, J. Nucleating and clarifying agents for polymers; 2008.
  5. Lotz, B., Wittmann, J., Lovinger, A. Structure and morphology of poly(propylenes): a molecular analysis. Polymer 1996;37(22):4979-4992. https://doi.org/10.1016/0032-3861(96)00370-9
  6. Cao, L., Su, D.F., Su, ZQ, Chen, X.N. Morphology, crystallization behavior and tensile properties of β-nucleated isotactic polypropylene fibrous membranes prepared by melt electrospinning. Chin. J. Polym. Sci. 2014;32(9):1167-75. https://doi.org/10.1007/s10118-014-1465-2
  7. Bai, H., Wang, Y., Zhang, Z., Han, L., Li, Y., Liu, L., et al. Influence of annealing on microstructure and mechanical properties of isotactic polypropylene with β-phase nucleating agent. Macromolecules. 2009;42(17):6647-55. https://doi.org/10.1021/ma9001269
  8. Bao, R.Y., Cao, J., Liu, Z.Y., Yang, W., Xie, B.H., Yang, M.B. Towards balanced strength and toughness improvement of isotactic polypropylene nanocomposites by surface functionalized graphene oxide. J. Mater. Chem. A. 2014;2(9):3190-9. https://doi.org/10.1039/C3TA14554A
  9. Xu, J.Z., Liang, Y.Y., Huang, H.D., Zhong, G.J., Lei, J., Chen, C., et al. Isothermal and nonisothermal crystallization of isotactic polypropylene/graphene oxide nanosheet nanocomposites. J. Polym. Res. 2012;19(10):1-7. https://doi.org/10.1007/s10965-012-9975-5
  10. Reyes-de Vaaben, S., Aguilar, A., Avalos, F., Ramos-de Valle, L.F. Carbon nanoparticles as effective nucleating agents for polypropylene. J. Therm. Anal. Calorim. 2008;93(3):947-52. https://doi.org/10.1007/s10973-007-8591-9
  11. Zhang, Y.F., He, B., Hou, H.H., Guo, L.H. Isothermal crystallization of isotactic polypropylene nucleated