Journals / El-Cezeri / 2023 / Cilt: 10 - Sayı: 1

Design of Power and Area Efficient Carry Skip Adder and FIR filter Implementation

Journal
El-Cezeri
Pages
81–89
Publication Date
2023-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Experimental results show that the 32-bit implementation of the proposed adder has a significant power reduction of 42% and 38.3%, area reduction of 27%, and 18.3% with respect to Conventional CSKA and CI CSKA adder with a little over ahead in delay.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Adders are used in processing units such as Arithmetic and Logic Units (ALUs) as an essential building block, and in many blocks of microprocessor chips critical path, adders occupy an important place.
📊
Key Findings & Data:Hence reducing power, area and increasing the speed of adders are significantly important.
💡
Conclusion & Impact:Experimental results show that the 32-bit implementation of the proposed adder has a significant power reduction of 42% and 38.3%, area reduction of 27%, and 18.3% with respect to Conventional CSKA and CI CSKA adder with a little over ahead in delay.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Carry Skip Adder · Power Consumption · FIR

Abstract

Adders are used in processing units such as Arithmetic and Logic Units (ALUs) as an essential building block, and in many blocks of microprocessor chips critical path, adders occupy an important place. Hence reducing power, area and increasing the speed of adders are significantly important. This paper proposes a modified structure of Carry Skip Adder (CSKA) with a reduction in consumption of power and area without affecting the speed when compared with the conventional adder structures. In order to get better effectiveness of the modified CSKA by including concatenation, incrementation schemes, and variable latency for the proposed hybrid structure, which reduces the power utilized without affecting the operating speed of the adder. The modified structure in CSKA helps in improving the slack time, which further reduces the voltage with the parallel structure. Experimental results show that the 32-bit implementation of the proposed adder has a significant power reduction of 42% and 38.3%, area reduction of 27%, and 18.3% with respect to Conventional CSKA and CI CSKA adder with a little over ahead in delay. The proposed adder is used to implement a 5-tap FIR filter which shows a significant reduction in power consumption and area.

Özet

Adders are used in arithmetic and logic units (ALUs) as a key building block and many blocks of microprocessor chips critical path adders occupy an important place. Hence reducing power, area and increasing the speed of adders is significantly important. This paper proposes a modified structure of Carry Skip Adder (CSKA) with reduction in consumption of power and area without affecting the speed when compared with the conventional adder strctures. In order to get better effectiveness of the modified CSKA by including concatenation, incrementation schemes and variable latency for the proposed hybrid structure, which reduces the power utilized without affecting the operating speed of the adder. The modified structure in CSKA helps in improving the slack time which further reduces the voltage with the parallel structure. Experimental results show that the 32 bit implementation of proposed adder has a significant power reduction of 42.% and 38.3%, area reduction of 27% and 18.3% with respect to Conventional CSKA and CI CSKA adder with a little over ahead in delay. The proposed adder is used to implement a 5 tap FIR filter which shows a significant reduction in power consumption and area.

🔖

Cite This Article

V, G., CHENGUTTUVAN, E., SUBRAMANIYAM, D. (2023). Design of Power and Area Efficient Carry Skip Adder and FIR filter Implementation. El-Cezeri, Cilt: 10 - Sayı: 1, 81–89. https://ajindex.com/articles/879625

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Alioto M. and Palumbo G 2003, “A simple strategy for optimized design of one-level carry-skip adders‟, IEEE Trans. Circuits Syst. I, Fundam. Theory Appl., vol. 50, no. 1, 141–148. Chen et al. Y 2010, “Variable-latency adder (VL-adder) designs for low power and NBTI tolerance”, IEEE Trans. Very Large Scale Integr. (VLSI) Syst., vol. 18, no. 11, 1621–1624.
  2. Chen Y., Li H., Li J., and Koh C.K 2007, “Variable-latency adder (VL-adder): New arithmetic circuit design practice to overcome NBTI”, ACM/IEEE Int. Symp. Low Power Electron. Design (ISLPED), 195–200. Chirca et al K 2004, “A static low-power, high-performance 32-bit carry skip adder”, in Proc. Euromicro Symp. Digit. Syst. Design (DSD),615–619.
  3. Gayles E., Owens R. M., and Irwin M. J 1996, “Low power circuit techniques for fast carry-skip adders”, Proc. 1996 Midwest Symp. Circuits and Systems,87-90. Ghosh S. and Roy K. 2008, “Exploring high-speed low-power hybrid arithmetic units at scaled supply and adaptive clock-stretching”, in Proc. Asia South Pacific Design Autom. Conf. (ASPDAC),635–640.
  4. Guyot A., Hochet B., and Muller J.M 1987, “A way to build efficient carry skip adders”, IEEE Trans. Comput., vol. C-36, no. 10, 1144–1152. Harris D 2003, “A taxonomy of parallel prefix networks”, in Proc. IEEE Conf.Rec. 37th Asilomar Conf. Signals, Syst., Comput., vol. 2., 2213- 2217. Jia et al S 2003, “Static CMOS implementation of logarithmic skip adder”, in Proc. IEEE Conf. Electron Devices Solid-State Circuits,509–512. Kim Y. and Kim L.-S, 2001, “64-bit carry-select adder with reduced area”, Electron. Lett., vol. 37, no. 10,614– 615. Kogge P. M. and Stone H. S. 1973, “A parallel algorithm for the efficient solution of a general class of recurrence equations”, IEEE Trans. Comput., vol. C- 22, no. 8,786–793. Lehman M. and Burla N. 1961, “Skip techniques for high-speed carry propagation in binary arithmetic units”, IRE Trans. Electron. Comput. vol. EC-10, no. 4, 691–698. Majerski S. 1967, “On determination of optimal distributions of carry skips in adders”, IEEE Trans. Electron. Comput., vol. EC-16, no. 1, 45–58.
  5. Milad Bahadori, Mehdi Kamal, Ali Afzali-Kusha and Massoud Pedram 2015, “High-Speed and Energy-Efficient Carry Skip Adder Operating Under a Wide Range of Supply Voltage Levels”, IEEE transsactions on Very Large Scale Integration (VLSI) systems, vol. 24, no. 2, 421-433.
  6. Nagendra C., Irwin M. J. and Owens R. M. 1996, “Area-time-power tradeoffs in parallel adders”, IEEE Trans. Circuits Syst. II, Analog Digit. Sig