Journals / Uluslararası Çevresel Eğilimler Dergisi / 2022 / Cilt: 6 - Sayı: 2

Investigation of the retention of oils mixed with water by forming activated carbon added nanofibers

Pages
78–92
Publication Date
2022-12-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, it has been proven that this material, which has hydrophobic and oleophilic properties, can be used in oil/water separation processes, and the oil-derived waste polystyrene materials that cause water pollution are recycled.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Heavy metals, waste oils, garbage, petroleum-derived polymers, animal and medical wastes cause pollution in water resources.
📊
Key Findings & Data:It is aimed to increase the contact angle value by adding activated carbon produced from apricot kernels to the nanofibers produced from waste polystyrene.
💡
Conclusion & Impact:As a result, it has been proven that this material, which has hydrophobic and oleophilic properties, can be used in oil/water separation processes, and the oil-derived waste polystyrene materials that cause water pollution are recycled.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Water pollution · nanofibre · oleophilic

Abstract

Heavy metals, waste oils, garbage, petroleum-derived polymers, animal and medical wastes cause pollution in water resources. The resulting pollution poses a danger to aquatic creatures and harms these creatures. In this study, obtaining wettable nanofibers for dewatering of oils mixed with water was investigated. It is aimed to increase the contact angle value by adding activated carbon produced from apricot kernels to the nanofibers produced from waste polystyrene. As a result, oil-water separation was carried out by increasing the hydrophobicity of the nanofiber and preserving its oil-holding property. In the experiments, 4 different concentrations of solutions were prepared using waste polystyrene and dimethylformamide (DMF)/(C3H7NO) and nanofibers were produced by electrospinning device. According to the SEM images, it was determined that the sample with the best fibre structure belonged to the 17% solution. On top of this, new nanofibers were produced by adding 5% and 10% by mass of activated carbon made from apricot kernels to the same solution. The contact angle values of the produced nanofibers were measured and it was observed that the hydrophobicity of the 10% activated carbon added nanofiber was the highest. In order to determine the water and oil absorption of the sample with the best structure and activated carbon added samples, it was tested by dropping 2 mL of water and 2 mL of oil on the experimental setup. As a result, it has been proven that this material, which has hydrophobic and oleophilic properties, can be used in oil/water separation processes, and the oil-derived waste polystyrene materials that cause water pollution are recycled.

🔖

Cite This Article

KARABİLGİN, M., AĞAÇAYAK, E., SAFRAN, B. G., AĞAÇAYAK, M., AĞAÇAYAK, T. (2022). Investigation of the retention of oils mixed with water by forming activated carbon added nanofibers. Uluslararası Çevresel Eğilimler Dergisi, Cilt: 6 - Sayı: 2, 78–92. https://ajindex.com/articles/874973

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Yıldız, K., Sipahioğlu, Ş., Yılmaz, M., (2008), "Çevre bilimi ve eğitimi," Gündüz Eğitim ve Yayıncılık, Ankara, ISBN: 978-925-6859-86-5 S.104-105. [2]
  2. Wang, S., Liu, K., Yao, X. ve Jiang, L., (2015), "Bioinspired surfaces with superwettability: new ınsight on theory, design, and applications", Chemical Reviews, 115 (16), 8230−8293
  3. Yalçın Erik, N., (2015), “ Petrol tankeri kazaları ve neden olduğu çevre kirliliği”, Mavi Gezegen (20), 1-11
  4. Özgür, H., Gemici, Z., Bayırdır, M., (2007), "Akıllı nanoyüzeyler", Bilim ve Teknik, Sayı: 473, s. 52-56
  5. Ordu, F., (2012), "Metalik Yüzeylerde Kimyasal İşleme Yöntemi İle Hidrofobik Yüzey Oluşturulması" Trakya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, Yüksek Lisans Tezi
  6. Özdemir, G., (2017), "Sıvıların Islatma Yetenekleri ve Temas Açısı", İnovatif Kimya Dergisi, 36
  7. Aygül, E., (2019). "Yeni Nesil Süperhidrofobik Kaplamaların Hazırlanması Ve Yağ/Su Ayırma İşlemlerindeki Kullanımları" Gazi Üniversitesi, Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü, Kimya Ana Bilim Dalı, 93 sayfa
  8. Teğin, Ş. Ö., Şahin, Ö., Baytar, O., & İzgi, M. S., (2020), "Preparation and characterization of activated carbon from almond shell by microwave-assisted using ZnCl2 activator" International Journal of Chemistry and Technology, 4(2), 130-137
  9. Ozmak, M. Y., (2010), "Biyokütle atıklardan aktif karbon üretimi", Doktora Tezi, Ankara Üniversitesi, Fen Bilimleri Enstitüsü, Kimya Mühendisliği Anabilim Dalı, 85 sayfa
  10. Zeytuncu, B. (2014), "Elektrospinning Tekniği ve Uv Işımasının Eşzamanlı Olarak Uygulanması ile Nanofiber Membranların Hazırlanması ve Kıymetli Metallerin Adsorpsiyonunda Uygulanması" Doktora Tezi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Kimya Anabilim Dalı, 172 sayfa
  11. Huang, Z. M., Zhang, Y. Z., Kotaki, M., & Ramakrishna, S., (2003), "A review on polymer nanofibers by electrospinning and their applications in nanocomposites", Composites science and technology, 63(15), 2223-2253
  12. Dzenis, Y., (2004), "Spinning continuous fibers for nanotechnology", Science, 304 (5679), 1917-1919
  13. Ramakrishna, S., Fujihara, K., Teo, W. E., Yong, T., Ma, Z., & Ramaseshan, R., (2006), "Electrospun nanofibers: solving global issues", Materials Today, 9 (3), 40-50
  14. Süslü, A., (2009), "Elektro-eğirme yöntemi ile nanofiber ve nanotüp üretimi", Doktora Tezi, Dokuz Eylül Üniversitesi, Fen Bilimleri Enstitüsü, Kimya An