Journals / Uluslararası Çevresel Eğilimler Dergisi / 2022 / Cilt: 6 - Sayı: 1

Cool concrete facades produced from waste materials

Pages
1–9
Publication Date
2022-06-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Cool facade test samples were studied by preparing them by using raw materials; acidic & basic tuffs, fine waste materials from marble & travertine dimensioning facilities, cement factory fine size wastes, and fly ashes of power plant to observe their heat accumulation characteristics.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Human comfort inside or outside of the houses has been related also with surrounding temperature.
📊
Key Findings & Data:That is, excess heat accumulated on concrete facades or concrete structural elements cause temperature increase around them until their temperatures have been levelled.
💡
Conclusion & Impact:Cool facade test samples were studied by preparing them by using raw materials; acidic & basic tuffs, fine waste materials from marble & travertine dimensioning facilities, cement factory fine size wastes, and fly ashes of power plant to observe their heat accumulation characteristics.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Concrete facades · Insulation plates · Heat deposition

Abstract

Human comfort inside or outside of the houses has been related also with surrounding temperature. Concrete masses used in urban areas influence surrounding air temperature due to their heat storage properties. Due to surrounding air temperature they absorb or supply heat energy through conductions, convention or radiation manners. Sun heated solid masses in cities mainly; roads, roofs, buildings’ external walls, parking lots etc. have therefore influenced urban air temperatures. Heat energy originated due to radiation waves of sun have been accumulated on surfaces of those solid materials and then excess heat is ready to be transferred to surrounding environments (solids, liquids, gasses). That is, excess heat accumulated on concrete facades or concrete structural elements cause temperature increase around them until their temperatures have been levelled. This is favourable in winter (cold weather) for inside comfort of houses, but, it is disturbing in summer (hot weather) times. Small concrete facade samples had been prepared in this study to define their differences in heat energy storage capacities. Cool facade test samples were studied by preparing them by using raw materials; acidic & basic tuffs, fine waste materials from marble & travertine dimensioning facilities, cement factory fine size wastes, and fly ashes of power plant to observe their heat accumulation characteristics.

🔖

Cite This Article

GÖKAY, M. K., DOĞAN, K. (2022). Cool concrete facades produced from waste materials. Uluslararası Çevresel Eğilimler Dergisi, Cilt: 6 - Sayı: 1, 1–9. https://ajindex.com/articles/871956

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. P. Osmond and E. Sharifi, Guide to urban cooling strategies, Low Carbon Living CRC., Australian Government, Department of Industry, Innovation and Science, Business Cooperative Research Centres Programme, 2017, p72, Australia
  2. M. Taleghani, D. Sailor and G. Ban-Weiss, Micrometeorological simulations to predict the impacts of heat mitigation strategies on pedestrian thermal comfort in a Los Angeles neighbourhood, Environmental Research Letters, 2016, 11, 024003, doi:10.1088/1748-9326/11/2/024003
  3. Media Hub, Ashghal completes the works of cool pavement paint, Media Hub, Press Releases, Aug, 19th 2019, Internet page, www.ashghal.gov.qa/en/MediaHub/News
  4. M. Santamouris, N. Gaitani, A. Spanou, M. Saliari, K. Giannopoulou, K. Vasilakopoulou and T. Kardomateas, Using cool paving materials to improve microclimate of urban areas, Design realization and results of the Flisvos Project, Building and Environment, 2012, 53, 128-136
  5. J.M. Huang, R. Ooka, A. Okada, T. Omori and H. Huang, The effects of urban heat island mitigation strategies on the outdoor thermal environment in central Tokyo - A numerical simulation, The Seventh Asia-Pacific Conference on Wind Engineering, Nov.8-12th 2009, Taipei, Taiwan
  6. J. Roesler and S. Sen, Impact of pavements on the urban heat island, University of Illinois at Urbana-Champaign, Centre for Highway Pavement Preservation, CHPP, US Department of Transportation-Research and Innovative Technology Administration, RITA, 2016, p99
  7. HARC, Dallas urban heat island, Report summary, Dallas sustainable skylines initiative, Houston Advanced Research Centre, HARC, 2009, Texas, US
  8. H. E. Gilbert, P. J. Rosado, G. Ban-Weiss, J. T. Harvey, H. Li, B. H. Mandel, D. Millstein, A. Mohegh, A. Saboori and R. M. Levinson, Energy and environmental consequences of a cool pavement campaign, Energy and Buildings, 2017, 157, 53–77
  9. A. Jamshidi, K. Kurumisawa, G. White, T. Nishizawa, T. Igarashi, T. Nawa and J. Mao, State-of-the-art of interlocking concrete block pavement technology in Japan as a post-modern pavement, Construction and Building Materials, 2019, 200, 713–755
  10. R. Alyousef, O. Benjeddou, C. Soussi, M. A. Khadimallah and M. Jedidi, Experimental Study of New Insulation Lightweight Concrete Block Floor Based on Perlite Aggregate, Natural Sand, and Sand Obtained from Marble Waste, Advances in Materials Science and Engineering, V2019, Article ID 8160461, 2019, p14, doi.org/10.1155/2019/8160461
  11. P. Johansson, Va