Journals / Natural and Engineering Sciences / 2022 / Cilt: 7 - Sayı: 3

Adsorptive Desulfurization of Crude Oil with Clinoptilolite Zeolite

Pages
284–293
Publication Date
2022-12-25
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Moreover; it was determined that the highest sulfur removal was obtained by using 5 g CZ.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Crude oil; is a fossil fuel containing carbon, hydrogen, sulfur and many other components and is one of the world's largest and most widely used energy sources.
📊
Key Findings & Data:Then, 0.1 g, 0.5 g, 1 g, 2 g and 5 g of the characterized CZ were weighed and added to the 50 mL crude oil samples separately.
💡
Conclusion & Impact:Moreover; it was determined that the highest sulfur removal was obtained by using 5 g CZ.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Crude oil · sulphur · desulphurization

Abstract

Crude oil; is a fossil fuel containing carbon, hydrogen, sulfur and many other components and is one of the world's largest and most widely used energy sources. However, in order for crude oil to be used as an energy source, it must be refined. With the use of petroleum products obtained as a result of refining, very high amounts of SOx gas are released into the atmosphere. These gases seriously harm both the environment and human health. This study aimed to reduce the amount of sulfur in crude oil and reduce its possible damages by using clinoptilolite zeolite (CZ). For this purpose, first of all, CZ; was characterized by SEM and XRF. Then, 0.1 g, 0.5 g, 1 g, 2 g and 5 g of the characterized CZ were weighed and added to the 50 mL crude oil samples separately. The mixture was mixed with a magnetic stirrer at 400 rpm for 60 and 120 minutes at room temperature before going through with an adsorptive desulfurization step. Afterwards, it was separated from the adsorbent by centrifugation and the residual sulfur amount was determined by ASTM D 1552-03 method. As a result of this study, which was carried out in an experimental laboratory environment; it has been observed that the desulfurization efficiency varies between 0.75 and 5.76 % (w/v) with the use of CZ adsorbent. Moreover; it was determined that the highest sulfur removal was obtained by using 5 g CZ.

🔖

Cite This Article

ÖZKAN, V., ÖZKAN, A. (2022). Adsorptive Desulfurization of Crude Oil with Clinoptilolite Zeolite. Natural and Engineering Sciences, Cilt: 7 - Sayı: 3, 284–293. https://ajindex.com/articles/870112

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Ahmed, M.J. (2016). Preparation of activated carbons from date (Phoenix dactylifera L.) palm stones and application for wastewater treatments. Process Safety and Environmental Protection, 102, 168-182. https://doi.org/10.1016/j.psep.2016.03.010. ASTM D1552-03, Standard test method for sulfur in petroleum products (hightemperature method). Annual Book of Standards (American Society for Testing and Materials (ASTM), West Conshohocken, PA) Vol. 05.01 (2000).
  2. Baeza, P., Aguila, G., Vargas, G., Ojeda, J., & Araya, P. (2012). Adsorption of thiophene and dibenzothiophene on highly dispersed Cu/ZrO2 adsorbents. Applied Catalysis B: Environmental, 111, 133-140. https://doi.org/10.1016/j.apcatb.2011.09.026.
  3. Blanco-Brieva, G., Campos-Martin, J.M., Al-Zahrani, S.M., & Fierro, J.L.G. (2010). Removal of refractory organic sulfur compounds in fossil fuels using MOF sorbents. Global NEST Journal, 12(3), 296-304.
  4. Dashtpeyma, G., Shabanian, S.R., Ahmadpour, J., & Nikzad, M. (2022). The investigation of adsorption desulphurization performance using bimetallic CuCe and NiCe mesoporous Y zeolites: Modification of Y zeolite by H4EDTA-NaOH sequential treatment. Fuel Processing Technology, 235, 107379. https://doi.org/10.1016/j.fuproc.2022.107379.
  5. Dharaskar, S.A., Wasewar, K.L., Varma, M.N., Shende, D.Z., Tadi, K.K., & Yoo, C.K. (2014). Synthesis, characterization, and application of novel trihexyl tetradecyl phosphonium bis (2, 4, 4-trimethylpentyl) phosphinate for extractive desulfurization of liquid fuel. Fuel Processing Technology, 123, 1-10. https://doi.org/10.1016/j.fuproc.2014.02.001. Eßer, J., Wasserscheid, P., & Jess, A. (2004). Deep desulfurization of oil refinery streams by extraction with ionic liquids. Green Chemistry, 6(7), 316-322. https://doi.org/10.1039/B407028C.
  6. Gokel, G.W., Gerdes, H.M., & Dishong, D.M. (1980). Sulfur heterocycles. 3. Heterogeneous, phase-transfer, and acid-catalyzed potassium permanganate oxidation of sulfides to sulfones and a survey of their carbon-13 nuclear magnetic resonance spectra. The Journal of Organic Chemistry, 45(18), 3634-3639. https://doi.org/10.1021/jo01306a019.
  7. Gupta, N.K., Bae, J., Kim, S., & Kim, K.S. (2021). Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism. Chemosphere, 274, 129789. https://doi.org/10.1016/j.chemosphere.2021.129789.
  8. Kavak, Y and Haspolat, K. (2002). Farklı Yaklaşımlarla Enerji Kaynakları. Orient Yayınları, Gaziosmanpaşa– Çankaya/Ankara, Turkey